Click or drag to resize

ZumWiredRoomInterface Properties

The ZumNetBridgeRoomZumWiredRoomInterface type exposes the following members.

Properties
 NameDescription
Public propertyAlternateOccupancyScene Property to recall the occupancy scene.
Public propertyAlternateOccupancySceneFeedback Property to indicate that the occupancy scene is recalled.

This property will trigger ZumRoomInterfaceChange event with AlternateOccupancySceneFeedbackEventId.

Public propertyAlternateOccupancyVacancyScenesEnabledFeedback Property to indicate if the alternate occupancy and vacancy scenes are enabled.

true: occupancy and vacancy scenes are enabled; false; occupancy and vacancy scenes are not enabled

This property will trigger ZumRoomInterfaceChange event with AlternateOccupancyVacancyScenesEnabledEventId.

Public propertyAlternateVacancyScene Property to recall the vacancy scene.
Public propertyAlternateVacancySceneFeedback Property to indicate that the vacancy scene is recalled.

This property will trigger ZumRoomInterfaceChange event with AlternateVacancySceneFeedbackEventId.

Public propertyApplicationOperationSuspendedFeedback Property to indicate that Room Operation is suspended. true: Room Operation suspended; false: Room Operation not suspended When Room Operation is suspended, any Application currently connected to the Room will be disconnected and Keypads will not attempt to control lights during addressing operations.

This property will trigger ZumRoomInterfaceChange event with ApplicationOperationSuspendedEventId.

Public propertyAutoOffTime Property to set the auto off time in minutes.
Public propertyAutoOffTimeFeedback Property to report the auto off time in minutes.

This property will trigger ZumRoomInterfaceChange event with AutoOffTimeFeedbackEventId.

Public propertyAutoOffTimerEnabledFeedback Property to indicate if the auto off timer is enbled.

true: auto off timer is enabled; false: auto off timer is disabled

This property will trigger ZumRoomInterfaceChange event with AutoOffTimerEnabledEventId.

Public propertyBluetoothPinAcceptanceFeedback Property to indicate, if Bluetooth PIN is of 4 digit or 6 digit.

This property will trigger ZumRoomInterfaceChange event with BluetoothPinAcceptanceFeedbackEventId.

Public propertyBluetoothPinAlertFeedback Property to indicate the bluetooth pin alerts.

This property will trigger ZumRoomInterfaceChange event with BluetoothPinAlertFeedbackEventId.

Public propertyBluetoothPinFeedback Property to report the current Bluetooth PIN.

This property will trigger ZumRoomInterfaceChange event with BluetoothPinFeedbackEventId.

Public propertyBluetoothPinTypeObsolete.
Property to set the Bluetooth PIN type, 4 digit or 6 digit BLE pin.
Public propertyBluetoothPinTypeFeedback Property to indicate, if Bluetooth PIN is of 4 digit or 6 digit BLE pin.

This property will trigger ZumRoomInterfaceChange event with BluetoothPinTypeFeedbackEventId.

Public propertyBluetoothPinV2Feedback Property to return the current six digit bluetooth pin.

This property will trigger ZumRoomInterfaceChange event with BluetoothPinV2FeedbackEventId.

Public propertyConfigurationApplicationConnectedFeedback Property to indicate if the room is connected to the ZUM application for configuration.

true: room connected to ZUM application for configuration; false: room not connected to ZUM application for configuration

This property will trigger ZumRoomInterfaceChange event with ConfigurationApplicationConnectedEventId.

Public propertyCurrentDaylightLevelFeedback Property to report the current daylight level.

This property will trigger ZumRoomInterfaceChange event with CurrentDaylightLevelFeedbackEventId.

Public propertyCurrentRoomNameFeedback Property to return the current room name.

This property will trigger ZumRoomInterfaceChange event with CurrentRoomNameFeedbackEventId.

Public propertyDaylightingEnabledFeedback Property to indicate if Scene1 and Day-lighting is enabled.

This property will trigger ZumRoomInterfaceChange event with DaylightingEnabledEventId.

Public propertyDesiredBluetoothPin Property to set the desired Bluetooth PIN.
Public propertyDesiredBluetoothPinType Property to set the desired Bluetooth PIN type, 4 digit or 6 digit BLE pin.
Public propertyDesiredBluetoothPinV2 Property to set the six digit bluetooth pin.
Public propertyDeviceAlertsFeedback Property to indicate that the ZUM device with fault codes.

This property will trigger ZumRoomInterfaceChange event with DeviceAlertsFeedbackEventId.

Public propertyDeviceListFeedback Property to get the collection of devices that are communicating with the network.

For the device info refer ZummeshNetbridgeDeviceInfo class.

The BaseEvent event will trigger with DeviceListFeedbackEventId.

Public propertyDeviceThisInterfaceIsOn Returns the ZumNetJBoxDali or ZumNetJBoxDaliLegacy device the ZumNetBridgeRoomZumWiredRoomInterface is on.
Public propertyDimmerFaultsPresentFeedback Property to indicate that the dimmer faults are present.

This property will trigger ZumRoomInterfaceChange event with DimmerFaultsPresentFeedbackEventId.

Public propertyEnableLoadShed Property to enable or disable load shedding mode for all devices in the room.

true: load shedding enabled; false: load shedding disabled

Public propertyExportIdFeedback Property to set the export ID. Used by Hub Macros.

This is a string that can carry a command (request) to the HUB from the room. These are triggered by an event in the room, most likely a key press.

It is a string so that the request can be understood by the programmer while looking at the messages.

This property will trigger ZumRoomInterfaceChange event with ExportIdFeedbackEventId.

Public propertyFirmwareUpdateStatusFeedback Property to indicate the firmware upgrade status.

true: firmware upgrade is successful; false: firmware upgrade failed

This property will trigger ZumRoomInterfaceChange event with FirmwareUpdateStatusEventId.

Public propertyFloorIdFeedback Property to return the floor ID.

This property will trigger ZumRoomInterfaceChange event with FloorIdFeedbackEventId.

Public propertyInExternalOverrideFeedback Indicates if the device is in external override mode.

From Override wire on Zum Wired local bus.

The OverrideEventHandler event will trigger with External.

Public propertyInManualOverrideFeedback Indicates if the device is in manual override mode.

Lock all lights on (like override signal on Zum Wired local bus).

The OverrideEventHandler event will trigger with Manual.

Public propertyLoadControllerFirmwareLoadingSuspendedFeedback Property to indicate if the Load controlller firmware loading is suspended.

true: Load controller firmware loading is suspended; false: Load controller firmware loading is not suspended

This property will trigger ZumRoomInterfaceChange event with LoadControllerFirmwareLoadingSuspendedEventId.

Public propertyLoadShedMaximumLevel Property to set the load shed maximum level.
Public propertyLocalScheduleConfiguredFeedback Property to indicate, if local scheduling is configured on this room. ///

This property will trigger ZumRoomInterfaceChange event with LocalScheduleConfiguredEventId.

Public propertyLocalSchedulingEnabledFeedback Property to indicate, if local scheduling is enabled on this room. ///

This property will trigger ZumRoomInterfaceChange event with LocalSchedulingEnabledEventId.

Public propertyMissingDevicesFeedback Property to get the collection of devices that have disappeared from the network.

For the device info refer ZummeshNetbridgeDeviceInfo class.

The BaseEvent event will trigger with MissingDevicesFeedbackEventId.

Public propertyNumberOfDevicesFeedback Property to report the number of devices in room.

This property will trigger ZumRoomInterfaceChange event with NumberOfDevicesFeedbackEventId.

Public propertyOccupancySensorEnabledFeedback Property to indicate if the occupancy sensor is enabled or not.

true: occupancy sensor enabled; false: occupancy sensor disabled

This property will trigger ZumRoomInterfaceChange event with OccupancySensorEnabledEventId.

Public propertyParent The parent that a ZumNetBridgeRoomZumWiredRoomInterface object was added to.
Public propertyPlugStatusFeedback Property to indicate the plug status.

true: plug is on; false: plug is off

This property will trigger ZumRoomInterfaceChange event with PlugStatusEventId.

Public propertyRoomConfigurationChangedFeedback Property to indicate that the ZUM application changed the room's configuration.

true: ZUM application changed the room's configuration; false: ZUM application did not change the room's configuration

This property will trigger ZumRoomInterfaceChange event with RoomConfigurationChangedEventId.

Public propertyRoomDeviceFeedbackEnabledFeedback Property to indicate if the room device feedback is enabled.

true: room device feedback is enabled; false: room device feedback is disabled

This property will trigger ZumRoomInterfaceChange event with RoomDeviceFeedbackEnabledEventId.

Public propertyRoomId Property to set the room Id, unique number given by the app.
Public propertyRoomIdFeedback Property to return the room ID.

This property will trigger ZumRoomInterfaceChange event with RoomIdFeedbackEventId.

Public propertyRoomIdsMismatchFeedback Property to indicate that the room ids are mismatched.

This property will trigger ZumRoomInterfaceChange event with RoomIdsMismatchFeedbackEventId.

Public propertyRoomIsOnFeedback Property to indicate if room is on.

This property will trigger ZumRoomInterfaceChange event with RoomIsOnEventId.

Public propertyRoomOccupiedFeedback Property to indicate if the room is occupied.

This property will trigger ZumRoomInterfaceChange event with RoomOccupiedEventId.

Public propertySceneActiveFeedback Collection of scene active feedbacks.

Scene active feedback indicates that the corresponding acene is active.

This property will trigger ZumRoomInterfaceChange event with SceneActiveEventId and Index will indicate the index into this collection.

Public propertySetFloorId Property to set the floor ID.
Public propertySetRoomName Property to set the room name.
Public propertySetZoneId Property to set the zone ID.
Public propertySuspendApplicationOperation Property to suspend Room Operation. true: suspend Room Operation; false: continue Room Operation When Room Operation is suspended, any Application currently connected to the Room will be disconnected and Keypads will not attempt to control lights during addressing operations.
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Public propertyVicinityBindingEnabledFeedback Property to indicate if the vicinity occupancy binding logic is enabled.

true: vicinity occupancy binding logic is enabled; false: vicinity occupancy binding logic is disabled

This property will trigger ZumRoomInterfaceChange event with VicinityBindingEnabledEventId.

Public propertyZoneIdFeedback Property to return the zone ID.

This property will trigger ZumRoomInterfaceChange event with ZoneIdFeedbackEventId.

Top
See Also