Click or drag to resize

DmNaxXZone Methods

The DmNaxXZone type exposes the following members.

Methods
 NameDescription
Public methodAirPlayDisable Method to disable AirPlay on this Zones.
Public methodAirPlayEnable Method to enable AirPlay on this Zones.
Public methodCrestronDRCOff Disables the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio.
(Inherited from Zone)
Public methodCrestronDRCOn Applies the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio. Dynamic range control reduces loud peaks in sound while raising the level of quiet sounds.
(Inherited from Zone)
Public methodDisableSpotifyConnect Method to disable spotify connect on this zone.
Public methodDoNotDisturbOff Method to turn off Do Not Disturb.
Public methodDoNotDisturbOn Method to turn on Do Not Disturb.
Public methodDoorbellEnableOff Method to disable the doorbell mode for this zone. This is supported in device firmware versions 4.002.278600000 and higher
(Inherited from Zone)
Public methodDoorbellEnableOn Method to enable the doorbell mode for this zone. This is supported in device firmware versions 4.002.278600000 and higher
(Inherited from Zone)
Public methodDuckingOff Method to turn off Ducking for this Zones.
Public methodDuckingOn Method to turn on Ducking for this Zones.
Public methodEnableSpotifyConnect Method to enable spotify connect on this zone.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodLedFaultIndicationDisabled Faults will not be indicated by the LED
Public methodLedFaultIndicationEnabled Faults will be indicated by the LED
Public methodLedPowerIndicationDisabled Power Status will not be indicated by the LED
Public methodLedPowerIndicationEnabled Power Status will be indicated by the LED
Public methodLedSignalDetectIndicationDisabled Signal Status will not be indicated by the LED
Public methodLedSignalDetectIndicationEnabled Signal Status will be indicated by the LED
Public methodLoudnessOff Method to disable the zone's loudness function.
(Inherited from Zone)
Public methodLoudnessOn Method to enable zone's loudness function. When loudness is active, this adds a bass gain of +10dB and a treble gain of +5dB.
(Inherited from Zone)
Public methodMonoOff Method to set zone's audio to stereo.
(Inherited from Zone)
Public methodMonoOn Method to set the zone's audio to mono.
(Inherited from Zone)
Public methodMuteOff Method to unmute the zone's audio.
(Inherited from Zone)
Public methodMuteOn Method to mute the zone's audio.
(Inherited from Zone)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodZoneAmplifierDisable Method to disable the Amplifier for this Zones. (Useful in cases where only the line output is being utilized). This method is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
Public methodZoneAmplifierEnable Method to enable the Amplifier for this Zones. This method is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
Top
See Also