Clw |
The ClwDimExDimmerRemoteButtonSettings type exposes the following members.
| Name | Description | |
|---|---|---|
| ParameterBargraphBehavior | Specifies the bargraph functionality of the LED indicators in Remote mode. (In Local mode the LED bargraph is always on, and always reflects the current load level). | |
| ParameterBargraphTimeout | When the BargraphBehavior parameter is set to Change Only or Remote, this parameter specifies the time that must elapse with no change to the integer value before the LEDs revert to standard behavior. Use the SimplSharpDeviceHelper.SecondsToUShort to convert the time to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds | |
| ParameterRemoteDoubleTapTime | The time between the end of the first tap and the start of the second tap for a double tap to be recognized. Valid values range from 0.20 to 1.00 seconds. Use the SimplSharpDeviceHelper.SecondsToUShort to convert the time to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds | |
| ParameterRemoteHoldTime | The time that a button must be held before it is recognized as a "Hold" instead of a "Tap". Valid values range from 0.20 to 1.00 seconds. Use the SimplSharpDeviceHelper.SecondsToUShort to convert the time to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds | |
| ParameterRemoteWaitForDoubleTap | Determines whether a "Tap" should be sent immediately on the release of the button, or if the unit should wait until a Double Tap event occurs | |
| ParameterReservedButtonForLocalMode | Specifies which button is reserved to operate in Local mode when the unit is set to Remote mode. Zero = None and One through the number of supported buttons specifies the buttons. |