Click or drag to resize

Ft2aCblr1t Properties

The Ft2aCblr1t type exposes the following members.

Properties
 NameDescription
Public propertyBacklightState Property to set the state of the LED backlight. When this property value is false the button backlight is forced off during normal operation; when true, the backlight stays on when idle and blinks for cable retractions and fault conditions. Note that the backlight will also blink in setup mode regardless of the value of BacklightState property.
Public propertyBacklightStateFeedback Property to report the current state of the LED backlight. true = Backlight is On; false = Backlight is Off

This property will trigger BaseEvent event with BacklightStateEventId.

Public propertyButton Collection of buttons supported by the device.
Public propertyCableRetractedFeedback Property to report if the cable is retracted to original position. true = Cable is retracted; false = Cable is not retracted

This property will trigger BaseEvent event with CableRetractedEventId.

Public propertyClutchEngagedFeedback Property to report whether the clutch is engaged or dis-engaged. true = Clutch is engaged; false = Clutch is dis-engaged

This property will trigger BaseEvent event with ClutchEngagedEventId.

Public propertyClutchFaultFeedback Property to report the clutch fault state. true = Clutch fault detected; false = No fault detected

This property will trigger BaseEvent event with ClutchFaultEventId.

Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyParameterDoubleTapSpeed Returns and sets the time between the end of the first tap and the start of the second tap for a "DoubleTap" to be recognized. Use the SimplSharpDeviceHelper.SecondsToUShort to convert the seconds to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds. Valid values are 20 (0.2s) to 100 (1.0s), 50 (0.5s) is default
Public propertyParameterHoldTime Returns and sets the time in seconds that a button must be held before it is recognized as a "Hold" instead of a "Tap". Use the SimplSharpDeviceHelper.SecondsToUShort to convert the seconds to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds. Valid values are 20 (0.2s) to 100 (1.0s), 50 (0.5s) is default
Public propertyParameterRetractHoldTime Time value in seconds for retraction to start after hold. Use the SimplSharpDeviceHelper.SecondsToUShort to convert the seconds to a ushort value or the SimplSharpDeviceHelper.UShortToSeconds to convert the ushort value to seconds. If less than ParameterHoldTime, retraction happens on every button press. Otherwise retracts when held for specified time. Valid values range from 1 to 10 seconds.
Public propertyParameterWaitForDoubleTap Returns and sets the setting that determines whether a "Tap" should be sent immediately on the release of the button, or if the unit should wait until a "DoubleTap" event occurs. True = Tap reporting is postponed to see if a second tap comes in. In this case only "DoubleTap" is reported. False = Tap is reported at the end of every short press, "DoubleTap" is reported at the end of the second short press.
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRetractCountFeedback Property to report the number of retractions since the last reset. Valid values range from 0 to 65535.

This property will trigger BaseEvent event with RetractCountFeedbackEventId.

Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also