Click or drag to resize

DinTstatFcu Properties

The DinTstatFcu type exposes the following members.

Properties
 NameDescription
Public propertyAuxiliaryHeaterFeedback Property to indicate that the Auxiliary Heater connected to the system. True = Auxiliary Heater connected; False = Auxiliary Heater not connected.

The BaseEvent event will trigger with AuxiliaryHeaterFeedbackEventId for this property.

Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCurrentFanModeFeedback Property to indicate the current Fan Mode.

The BaseEvent event will trigger with FanModeChangedEventId for this property.

Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDigitalInputPorts Array of digital input on the device.
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyExternalTemperature Property to set temperature of the external device connected to the DIN-STAT-FCU device.
Public propertyExternalTemperatureFeedback Property to indicate temperature value sent to the device connected to the DIN-STAT-FCU device.

The BaseEvent event will trigger with ExternalTemperatureFeedbackEventId for this property and Index gives the index into the ExternalTemperatureFeedback collection.

Public propertyFanMode Property to set the current Fan Mode.
Public propertyFanModeFeedbackObsolete.
Property to indicate the current Fan Mode.

The BaseEvent event will trigger with FanModeChangedEventId for this property.

Public propertyFanSpeedFeedback Property to indicate the current Fan Speed.

The BaseEvent event will trigger with FanSpeedChangedEventId for this property.

Public propertyFcuTypeFeedback Property to report the value that describes the type of FCU(fan coil Unit) being used. Fcutype value ranges from 1 to 6. Additional values to be defined without 5/8 for possible errors including Temp prob error,regulation parameter error.

The BaseEvent event will trigger with FcuTypeFeedbackEventId for this property.

Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsCoolingFeedback Property to indicate cooling is active. True = Cooling is active ; False = Cooling is not active.

The BaseEvent event will trigger with IsCoolingFeedbackEventId for this property.

Public propertyIsHeatingFeedback Property to indicate heating is active. True = Heating is active; False = Heating is not active.

The BaseEvent event will trigger with IsHeatingFeedbackEventId for this property.

Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyMaximumCoolSetPointFeedback Property to report maximum cool setpoint. Maximum valid cool setpoint value is 16 degree Celsius.

The BaseEvent event will trigger with MaximumCoolSetPointFeedbackEventId for this property.

Public propertyMaximumHeatSetPointFeedback Property to report maximum heat setpoint. Maximum valid set point is value 30 degree Celsius.

The BaseEvent event will trigger with MaximumHeatSetPointFeedbackEventId for this property.

Public propertyMinimumCoolSetPointFeedback Property to report minimum cool setpoint. Minimum valid cool setpoint value is 30 degree Celsius.

The BaseEvent event will trigger with MinimumCoolSetPointFeedbackEventId for this property.

Public propertyMinimumHeatSetPointFeedback Property to report minimum heat setpoint. Minimum valid heat setpoint value is 16 degree Celsius.

The BaseEvent event will trigger with MinimumHeatSetPointFeedbackEventId for this property.

Public propertyModeCoolFeedback Property to indicate that cooling mode is enabled. True = Cooling mode is enabled ; False = Cooling mode is not enabled.

The BaseEvent event will trigger with ModeCoolFeedbackEventId for this property.

Public propertyModeHeatFeedback Property to indicate that heating mode is enabled. True = Heating mode is enabled ; False = Heating mode is not enabled.

The BaseEvent event will trigger with ModeHeatFeedbackEventId for this property.

Public propertyModeOffFeedback Property to indicate the heating/cooling is off. True = Mode is off ;False = Mode is not off.

The BaseEvent event will trigger with ModeOffFeedbackEventId for this property.

Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNumberOfDigitalInputPorts Number of digital inputs this device supports.
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySetPoint Property to set the main temperature setpoint. Default setpoint value is 21 degree Celsius.
Public propertySetPointFeedback Property to report the main temperature setpoint.

The BaseEvent event will trigger with SetPointFeedbackEventId for this property.

Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyTemperatureFeedback Property to indicate temperature feedback.

The BaseEvent event will trigger with TemperatureFeedbackEventId for this property and Index gives the index into the TemperatureFeedback collection.

Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also