Fm Properties |
The Fm type exposes the following members.
| Name | Description | |
|---|---|---|
| AutoMuteDisableFeedback | Indicates that the auto-mute feature for FM audio is currently disabled. | |
| AutoMuteEnableFeedback | Indicates that the auto-mute feature for FM audio is currently enabled. | |
| BandSelectFeedback |
Indicates that this band is currently selected.
(Inherited from AmFmBase) | |
| ChannelFeedback |
The current channel or frequency.
(Inherited from TunerBase) | |
| ClockDisable | Disables all universal time clock (UTC) signals while set to true. | |
| Frequency |
Sets the tuner to the indicated FM frequency.
In US mode, valid analog values range from 8800d (for 88.00MHz) to 10800d (for 108.00MHz).
The values increment in 10d steps.
In European mode, valid analog values range from 8750d (for 87.50MHz) to 10800d (for 108.00MHz).
The values increment in 5d steps.
(Inherited from AmFmBase) | |
| MonoFeedback | Indicates that the FM tuner is in the mono state. | |
| MuteOffFeedback |
Indicates that audio is active (not muted).
(Inherited from TunerBase) | |
| MuteOnFeedback |
Indicates that AM/FM audio is muted.
(Inherited from TunerBase) | |
| OffsetFromUTC | The UTC (Universal Time Clock) offset from GMT. | |
| PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| PresetModeFeedback |
Reports the current preset mode.
(Inherited from TunerBase) | |
| ProgramServiceName | The program service name of the current station. Typically these are the call letters of the station, e.g., WBGO. | |
| ProgramTypeName | The program type name of the current station. This string contains additional information about a given category. | |
| PSNameDisable | Disables ProgramServiceName while set to true. | |
| PTYDisable | Disables ProgramTypeCode and ProgramTypeName while set to true. | |
| RadioText | The radio text for the current station. This can include information such as phone numbers, artist names, song titles or station names. | |
| RadioTextDisable | Disables RadioText while set to true. | |
| RBDSProgramTypeCodeUS | Returns the program type code. This value is only valid if the tuner is in US mode. | |
| RDSProgramTypeCodeEurope | Returns the program type code. This value is only valid if the tuner is in European mode. | |
| ScanningFeedback |
Indicates that the tuner is currently scanning (via scan +/-) or searching (via search+/-) for FM stations.
(Inherited from AmFmBase) | |
| SignalStrengthFeedback |
When signal strength reporting is enabled reports the signal strength.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SigStrengthDisableFeedback |
Indicates that FM signal strength reporting is currently disabled.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from AmFmBase) | |
| SigStrengthEnableFeedback |
Indicates that FM signal strength reporting is currently enabled.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from AmFmBase) | |
| StationCommunicationProtocolFeedback | Reports whether the current station supports RDS/RBDS. | |
| StationMinus |
Tunes to the previous station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StationPlus |
Tunes to the next station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds, the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StereoFeedback | Indicates that the FM audio is in stereo mode. | |
| TA_TP_RDS_Disable | Disables TAStateReport, TPStateReport and RBDSStation while set to true. | |
| TAStateReport | Reports whether the current station broadcasts special traffic announcements. | |
| TPStateReport | Reports whether the current station regularly broadcasts traffic information throughout the day. | |
| TuneByTraffic | Selects a traffic report station to search. Setting this property to a valid value initiates the search. The search stops when a corresponding traffic station is found or the starting station is reached. | |
| UTCDay | The UTC (Universal Time Clock) day of the month. The value will range from 1d to 31d. | |
| UTCHour | The UTC hour of the day. The value will range from 0d, for 12:00 A.M. (midnight) to 23d. | |
| UTCMinute | The UTC (Universal Time Clock) minute reading. The value will range from 0d to 59d. | |
| UTCMonth | The UTC (Universal Time Clock) month of the year. The value will range from 1d (for January) to 12d (for December). | |
| UTCYear | The UTC (Universal Time Clock) year. For example, the year 2004 will report as 2004d. |