Hd |
The HdRx4kX10Mixer type exposes the following members.
| Name | Description | |
|---|---|---|
| AuxiliaryInputLevel | Property to set the value of the level for the auxiliary input on this output. Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB. 200d = +20dB -200d = -20dB. | |
| AuxiliaryInputLevelFeedback |
Property to read the feedback level of the auxiliary input on this output.
Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB.
200d = +20dB
-200d = -20dB.
The DMOutputChange event will trigger with AuxiliaryInputLevelFeedBackEventId. | |
| AuxiliaryInputMuteOffFeedback |
Property to indicate the state of the auxiliary input mute on this output
The DMOutputChange event will trigger with AuxiliaryInputMuteOffFeedBackEventId. | |
| AuxiliaryInputMuteOnFeedback |
Property to indicate the state of the auxiliary input mute on this output
The DMOutputChange event will trigger with AuxiliaryInputMuteOnFeedBackEventId. | |
| AuxiliaryOutputMuteOffFeedback |
Property to indicate the state of the unmute for auxiliary output on this output
The DMOutputChange event will trigger with AuxiliaryOutputAudioUnmuteEventId | |
| AuxiliaryOutputMuteOnFeedback |
Property to indicate the state of the mute for auxiliary output on this output
The DMOutputChange event will trigger with AuxiliaryOutputAudioMuteEventId | |
| HdmiAudioOutputMuteOffFeedback |
Property to indicate the state of the unmute for HDMI Audio output on this output
The DMOutputChange event will trigger with AudioUnmuteEventId | |
| HdmiAudioOutputMuteOnFeedback |
Property to indicate the state of the mute for HDMI Audio output on this output
The DMOutputChange event will trigger with AudioMuteEventId | |
| LineLevel | Property to set the value of the level for a given line on this output. Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB. 200d = +20dB -200d = -20dB. | |
| LineLevelFeedback |
Property to read the feedback level for a given line on this output.
Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB.
200d = +20dB
-200d = -20dB.
The DMOutputChange event will trigger with Line1LevelFeedBackEventId or Line2LevelFeedBackEventId. | |
| LineMuteOffFeedback |
Property to indicate the state of the unmute for a given line on this output
The DMOutputChange event will trigger with Line1MuteOffFeedBackEventId or Line2MuteOffFeedBackEventId. | |
| LineMuteOnFeedback |
Property to indicate the state of the mute for a given line on this output.
The DMOutputChange event will trigger with Line1MuteOnFeedBackEventId or Line2MuteOnFeedBackEventId. | |
| MicLevel | Property to set the value of the level for a given microphone on this output. Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB. 200d = +20dB -200d = -20dB. | |
| MicLevelFeedback |
Property to read the feedback level for a given microphone on this output.
Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB.
200d = +20dB
-200d = -20dB.
The DMOutputChange event will trigger with Mic1LevelFeedBackEventId or Mic2LevelFeedBackEventId. | |
| MicMuteOffFeedback |
Property to indicate the state of the unmute for a given microphone on this output
The DMOutputChange event will trigger with Mic1MuteOffFeedBackEventId or Mic2MuteOffFeedBackEventId. | |
| MicMuteOnFeedback |
Property to indicate the state of the mute for a given microphone on this output.
The DMOutputChange event will trigger with Mic1MuteOnFeedBackEventId or Mic2MuteOnFeedBackEventId. | |
| MonoFeedback |
Property to indicate the state of the mono on this output
The DMOutputChange event will trigger with MonoOutputFeedBackEventId | |
| Number | Mixer Number | |
| OutputMixerType |
The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase) | |
| Owner | Owner of this mixer | |
| Parent |
The parent that a given object was added to.
(Inherited from OutputMixerBase) | |
| SourceLevel | Property to set the value of the level for the source on this output. Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB. 200d = +20dB -200d = -20dB. | |
| SourceLevelFeedback |
Property to read the feedback level of the source on this output.
Valid range is: -20dB to +20dB with 1dB increment for 10. Default is 0dB.
200d = +20dB
-200d = -20dB.
The DMOutputChange event will trigger with SourceLevelFeedBackEventId. | |
| SourceMuteOffFeedback |
Property to indicate the state of the source mute on this output
The DMOutputChange event will trigger with SourceMuteOffFeedBackEventId. | |
| SourceMuteOnFeedback |
Property to indicate the state of the source mute on this output
The DMOutputChange event will trigger with SourceMuteOnFeedBackEventId. | |
| SpeakerOutputMuteOffFeedback |
Property to indicate the state of the unmute for speaker output on this output
The DMOutputChange event will trigger with SpeakerOutputMuteOffEventId | |
| SpeakerOutputMuteOnFeedback |
Property to indicate the state of the mute for speaker output on this output
The DMOutputChange event will trigger with SpeakerOutputMuteOnEventId | |
| SpeakerPowerOffFeedback |
Property to indicate the state of the speaker power off on this output
The DMOutputChange event will trigger with AmpPowerOffFeedBackEventId | |
| SpeakerPowerOnFeedback |
Property to indicate the state of the speaker power on on this output
The DMOutputChange event will trigger with AmpPowerOnFeedBackEventId | |
| StereoFeedback |
Property to indicate the state of the stero on this output
The DMOutputChange event will trigger with StereoOutputFeedBackEventId | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from OutputMixerBase) | |
| Volume | Property to set the output Volume level. Valid range is: -80dB to +20dB with 1dB increment for 10. Default is 0dB. 200d = +20dB -800d = -80dB. | |
| VolumeFeedback |
Reports the current volume in tenths of a dB.
Sets the output Volume level. Valid range is: -80dB to +20dB with 1dB increment for 10. Default is 0dB.
200d = +20dB
-800d = -80dB.
The DMOutputChange event will trigger with VolumeEventId. |