Black |
The BlackNovaKeypad type exposes the following members.
| Name | Description | |
|---|---|---|
| AlarmDateTime | Property to set the value to be shown on the display as alarm time and week days. It is visible on the screen when DisplaySelection is set from AlarmSetupDayPlusHoursPlusMinutes24HoursFormat to AlarmSetupDayPlusHoursPlusMinutes12HoursFormat. | |
| AlarmSetupState | Property to show/hide Alarm icon. true = Alarm icon is shown; false = Alarm icon is hidden | |
| AlarmTrigger | Property to turn On/Off Alarm mode. true = Alarm mode is turned On; false = Alarm mode is turned Off The default value (on device power up) is false. | |
| AnalogValue | Property to set the analog value, this value to be shown on the display as an integer number. It is visible on the screen when DisplaySelection is set to 3. The valid values range is from 0 to 999. The default value is 0. | |
| Button |
Collection of BLACKNOVA-KEYPAD Keypad buttons
This property will trigger ButtonStateChange event. | |
| CardStateFeedback |
Property to indicates the card presence for the devices equipped with cardholder.
true = Card is present; false = No card detected.
This property will trigger BaseEvent event with CardStateEventId. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| CursorPositionOnAlarmSetupScreen | Property to show active element on the Alarm setup screen. It is visible on the screen when DisplaySelection is set from Saturday to Sunday. The default value is Nothing. | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisplayBrightness | Property to set the level of LED/OLED screen brightness. The valid values range is from 10 to 100. The default value is 80. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| DisplaySelection | Property to select the source of value to be shown on the display. The values from different sources are stored in the device memory and ready to be shown any time. The default value is TurnOffTheDisplay. | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| FanSpeed | Property to set Fan speed and for thermostat devices it displays fan speed. The default value is Off. | |
| Feedbacks |
Property to get the collection of feedbacks on the device.
(Inherited from KeypadBase) | |
| HoldTime | Property to set the time in milliseconds after which the button state Held became active. The value should be in the range from 300 to 5000 milliseconds. Out of the range values are ignored. The default value is 500. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds. | |
| HumiditySensorOutputFeedback |
Property to indicate the level of sensed humidity in the room for the devices equipped with humidity sensor.
The updated value is coming every time when the measured humidity is changed by more than 1%.
Output values range is from 0 to 100.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
This property will trigger BaseEvent event with HumiditySensorOutputFeedbackEventId. | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LayoutSelector | Property used for selecting layout of the keypad. The valid values range is from 0 to 255. Out of range values are ignored. The default value is 0. | |
| LockPanel | Property to block button and slider events from keypad from sending to other devices. true = Keypad is blocked; false = Keypad is not blocked. The default value (on device power up) is false | |
| ModeSelection |
Property to select Thermostat mode, for thermostat devices it displays the selected mode.
Out of range values are ignored The default value is None. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PercentageValue | Property to set the value to be shown on the display as an integer number. It is visible on the screen when DisplaySelection is set to 4. The valid values range is from 0 to 100. The default value is 0. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| ProximitySensorFeedback |
Property to indicate proximity sensor detection near the keypad
true = detected; false = not detected
This property will trigger BaseEvent event with ProximitySensorEventId. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| RemoteWakeUp | Property to set the Active mode from Sleep mode on a keypad without pressing buttons on the keypad. true = Switch keypad to active mode; false = No actions. | |
| RfIdCardIdFeedback |
Property to report the ID of attached RFID card as a string of HEX values for devices with RFID reader.
For example: A1B2C3D4FF0055AA
This property will trigger BaseEvent event with RfIdCardIdFeedbackEventId. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SleepModeBacklight | Property to set the brightness level of buttons backlight when the device is in sleep mode. The valid values range is from 0 to 100. Out of range values are ignored. The default value is 20. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| SleepModeBrightness | Property to set the brightness level of LED/OLED screen when the device is in sleep mode. The valid values range is from 0 to 100. Out of range values are ignored. The default value is 20. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| Sliders | Property to return the collection of sliders. | |
| TemperatureCentigrade | Property to set the temperature value in degrees Celsius multiplied by 10 to be shown on the display. It is visible on the screen when DisplaySelection is set to 5. The valid values range is from 0 to 999, that represents 0.0C...99.9C degrees. The default value is 0. | |
| TemperaturefFahrenheit | Property to set the temperature value in degrees Fahrenheit multiplied by 10 to be shown on the display. It is visible on the screen when DisplaySelection is set to 6. The valid values range is from 0 to 999, that represents 0.0F...99.9F degrees. The default value is 0. | |
| TemperatureSensorOutputFeedback |
Property to indicate the room temperature measured by a built-in sensor [°C] multiplied by 10.
The value is coming every time when the temperature is changing by more than 0.5°C.
Output values range is from 0 to 999, that is equal to temperatures from 0.0°C to 99.9°C
This property will trigger BaseEvent event with TemperatureSensorOutputFeedbackEventId. | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| WaitForSleep | Property to set the time in seconds after which the device is switching to the Sleep mode the SleepModeBacklight value applied for all button's backlight. The valid values range is from 2 to 999 seconds. Out of range values are ignored. The default value is 20. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds. | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |