Am |
The Am101 type exposes the following members.
| Name | Description | |
|---|---|---|
| AccessCode |
The access code for the device. Access code mode must be set to Fixed in order to change the access code.
Once the access code is changed the device must be rebooted for the change to take effect.
(Inherited from Am100) | |
| AccessCodeFeedback |
Returns the access code.
(Inherited from Am100) | |
| AccessCodeModeFeedback |
Reports the current access code mode.
(Inherited from Am100) | |
| ApplyLayoutControlWebpagePasswordFeedback | Obsolete. Applies ModeratorPassword for the web pages. (Inherited from Am100) | |
| ConnectedDeviceFeedback |
Indicates if a Crestron Connected project is connected.
Device's IP must be defined in Crestron Connected setup and the connection must be successful.
(Inherited from Am100) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisplayControl |
Property to get the AirMedia Display Control AirMediaGeneralDisplay.
(Inherited from Am100) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| ErrorFeedback |
Should always be 0. If the value of this field is not 0 see ErrorTextFeedback for more details.
(Inherited from Am100) | |
| ErrorTextFeedback |
Displays error messages (up to 200
characters) from the device. For example:
'No error'.
(Inherited from Am100) | |
| HostnameFeedback |
Reports the host name of the device.
(Inherited from Am100) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IPAddressFeedback |
Returns the IP address of the device.
(Inherited from Am100) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LayoutControlPassword |
Sets the layout control password. When equal to "" layout control password on the web pages is disabled.
(Inherited from Am100) | |
| LayoutControlPasswordFeedback |
Reports the layout control password.
(Inherited from Am100) | |
| LayoutControlWebpageDisableFeedback |
Indicates that the web interface
for moderation control is
disabled.
(Inherited from Am100) | |
| LayoutControlWebpageEnableFeedback |
Indicates that the web interface
for moderation control is enabled.
(Inherited from Am100) | |
| ModeratorDisableFeedback |
Indicates the CIP interface is
disabled as the moderator for
Layout Controls of the AM-100.
(Inherited from Am100) | |
| ModeratorEnableFeedback |
Indicates that CIP interface is
enabled as the moderator for
Layout Controls of the AM-100.
(Inherited from Am100) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NumberOfUsersConnectedFeedback |
Indicates the number of users currently connected.
(Inherited from Am100) | |
| OutputResolutionFeedback |
Indicates the output resolution.
(Inherited from Am100) | |
| OutputTimeout |
Property to set the amount of time in minutes before the device turns off its output.
Valid range is 0-300 minutes. 0 = infinite.
(Inherited from Am100) | |
| OutputTimeoutFeedback |
Indicates the timeout in minutes after which the device will turn off its output.
This will fire the "BaseEvent" with OutputTimeoutFeedbackEventId.
(Inherited from Am100) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| RebootRequiredFeedback |
Indicates that reboot is required because
there has been a change in a setting.
(Inherited from Am100) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SourceSelection |
Selects the source on the Crestron
connected display.
Valid values range from 0d to 10d
depending on the source. For example, if
the source has only 4 inputs, valid values
will range from 0d to 4d.
(Inherited from Am100) | |
| SourceSelectionFeedback |
Indicates the source of the Crestron connected display.
(Inherited from Am100) | |
| StatusFeedback |
Reports the status of the device.
(Inherited from Am100) | |
| StatusTextFeedback |
Returns the status of the device in text form.
(Inherited from Am100) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| UserVideoControls |
User video controls.
User number is index into collection.
If a feedback changes on one of these controls the base event will return the EventId from AirMediaUserVideoControl as well as the index of the control.
(Inherited from Am100) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |