ITxRxuEndpointOutputCommonProperties Interface |
Interface to declare the common properties for different Endpoint Output ports like HDMI and DM Lite on HD-TXU-4KZ-XXX and HD-RXU-4KZ-XXX.
Namespace: Crestron.SimplSharpPro.DM.EndpointsAssembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntaxpublic interface ITxRxuEndpointOutputCommonProperties
The ITxRxuEndpointOutputCommonProperties type exposes the following members.
Properties| | Name | Description |
|---|
 | AudioChannelsFeedback |
Reports the number of audio channels detected on the stream.
|
 | AudioFormatFeedback |
Reports the detected audio format accompanying the stream.
|
 | AutomaticPowerSettingsDisabledFeedback |
Property to indicate that the automatic power settings timeout is disabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
|
 | AutomaticPowerSettingsEnabledFeedback |
Property to indicate that the automatic power settings timeout is enabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
|
 | BlankDisabledFeedback |
Indicates that the video is unblanked.
|
 | BlankEnabledFeedback |
Indicates that the video is blanked.
|
 | HotplugDetectedFeedback |
Property to indicate if a hot plug is detected (when true).
|
 | InputPrioritiesFeedback |
Property to return the current input priorities for this output in an array.
Number of inputs are from 1 to 4 and depends on the device type and the valid priority values are from 0 to 9.
To access input 2 use priority follow the below logic...
byte[] inputPiorities = InputPrioritiesFeedback;
inputPiorities[2 - 1] returns the priority of the input 2.
|
 | MuteFeedback |
Property to indicate if output is muted.
|
 | Name |
Property to set name of the output port.
|
 | NameFeedback |
Property to return the name of the output port.
|
 | OccupancyDetectedFeedback |
Property to indicate if occupancy is detected, valid when occupancy detect source is control system.
true: occupancy detected; false: occupancy not detected
|
 | OutputDisabledFeedback |
Property to indicate if output is disabled.
|
 | OutputEnabledFeedback |
Property to indicate if output is enabled.
|
 | SinkHdcpCapabilityFeedback |
Property to report the downstream sink/display HDCP version.
|
 | StreamType |
Get the type of stream this object represents.
|
 | TransmittingFeedback |
This property value is true when transmitting HDMI/DM Lite Output video signal and HotplugDetectedFeedback is true.
|
 | UnmuteFeedback |
Property to indicate if output is unmuted.
|
 | VacancyDetectedFeedback |
Property to indicate if vacancy is detected, valid when vacancy detect source is control system.
true: vancancy detected; false: vacancy not detected
|
Top
Methods| | Name | Description |
|---|
 | DetectOccupancy |
Method to detect occupancy, valid when occupancy detect source is control system.
|
 | DetectVacancy |
Method to detect vacancy, valid when vacancy detect source is control system.
|
 | DisableAutomaticPowerSettings |
Method to disable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI.
|
 | DisableBlank |
Method to unblank the output.
|
 | DisableOutput |
Method to disable output.
|
 | EnableAutomaticPowerSettings |
Method to enable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI.
|
 | EnableBlank |
Method to blank the output.
|
 | EnableOutput |
Method to enable output.
|
 | InputPriorities |
Method to set the input priorities for this output.
Input Priorities are based on number of inputs.
Example : if a device has 4 inputs and 2 outputs then the
priority serial = byte[]{0,1,2,0} means
Input 1 = Not used
Input 2 = Priority 1
Input 3 = Priority 2
Input 4 = Not used
|
 | Mute |
Method to mute output.
|
 | Unmute |
Method to unmute output.
|
TopVersion Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also