Click or drag to resize

Am100 Properties

The Am100 type exposes the following members.

Properties
 NameDescription
Public propertyAccessCode The access code for the device. Access code mode must be set to Fixed in order to change the access code. Once the access code is changed the device must be rebooted for the change to take effect.
Public propertyAccessCodeFeedback Returns the access code.
Public propertyAccessCodeModeFeedback Reports the current access code mode.
Public propertyApplyLayoutControlWebpagePasswordFeedbackObsolete.
Applies ModeratorPassword for the web pages.
Public propertyConnectedDeviceFeedback Indicates if a Crestron Connected project is connected. Device's IP must be defined in Crestron Connected setup and the connection must be successful.
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisplayControl Property to get the AirMedia Display Control AirMediaGeneralDisplay.
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyErrorFeedback Should always be 0. If the value of this field is not 0 see ErrorTextFeedback for more details.
Public propertyErrorTextFeedback Displays error messages (up to 200 characters) from the device. For example: 'No error'.
Public propertyHostnameFeedback Reports the host name of the device.
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIPAddressFeedback Returns the IP address of the device.
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLayoutControlPassword Sets the layout control password. When equal to "" layout control password on the web pages is disabled.
Public propertyLayoutControlPasswordFeedback Reports the layout control password.
Public propertyLayoutControlWebpageDisableFeedback Indicates that the web interface for moderation control is disabled.
Public propertyLayoutControlWebpageEnableFeedback Indicates that the web interface for moderation control is enabled.
Public propertyModeratorDisableFeedback Indicates the CIP interface is disabled as the moderator for Layout Controls of the AM-100.
Public propertyModeratorEnableFeedback Indicates that CIP interface is enabled as the moderator for Layout Controls of the AM-100.
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNumberOfUsersConnectedFeedback Indicates the number of users currently connected.
Public propertyOutputResolutionFeedback Indicates the output resolution.
Public propertyOutputTimeout Property to set the amount of time in minutes before the device turns off its output. Valid range is 0-300 minutes. 0 = infinite.
Public propertyOutputTimeoutFeedback Indicates the timeout in minutes after which the device will turn off its output. This will fire the "BaseEvent" with OutputTimeoutFeedbackEventId.
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRebootRequiredFeedback Indicates that reboot is required because there has been a change in a setting.
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySourceSelection Selects the source on the Crestron connected display. Valid values range from 0d to 10d depending on the source. For example, if the source has only 4 inputs, valid values will range from 0d to 4d.
Public propertySourceSelectionFeedback Indicates the source of the Crestron connected display.
Public propertyStatusFeedback Reports the status of the device.
Public propertyStatusTextFeedback Returns the status of the device in text form.
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyUserVideoControls User video controls. User number is index into collection. If a feedback changes on one of these controls the base event will return the EventId from AirMediaUserVideoControl as well as the index of the control.
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also