Three |
The ThreeSeriesTouchScreenSystemThreeReservedCues type exposes the following members.
| Name | Description | |
|---|---|---|
| BankAGreen | Set the color of bank A to Green. | |
| BankAGreenFeedback | Sig to report back if the color of bank A is Green. | |
| BankAOff | Sig to turn off the bank A hard keys | |
| BankAOffFeedback | Sig to determine if Bank A is off as reported by the device. | |
| BankARed | Set the color of bank A to Red. | |
| BankARedFeedback | Sig to report back if the color of bank A is Red. | |
| BankBGreen | Set the color of bank B to Green. | |
| BankBGreenFeedback | Sig to report back if the color of bank B is Green. | |
| BankBOff | Sig to turn off the bank B hard keys | |
| BankBOffFeedback | Sig to determine if Bank B is off as reported by the device. | |
| BankBRed | Set the color of bank B to Red. | |
| BankBRedFeedback | Sig to report back if the color of bank B is Red. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| GreenBrightness | Set the brightness level of the Green color for this device. | |
| GreenBrightnessDown | Lowers the green backlight brightness by 1%. | |
| GreenBrightnessFeedback | Get the brightness level of the Green color as reported by the device. | |
| GreenBrightnessUp | Raises the green backlight brightness by 1%. | |
| HardkeyA1ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyA2ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyA3ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyA4ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyA5ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyB1ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyB2ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyB3ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyB4ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyB5ColorFeedback | Sig to return the current color of the hardkey. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyBankAColor | Set the color from the bank A buttons. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyBankAColorFeedback | Get the color of the bank A buttons as reported by the device. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyBankBColor | Set the color for the bank B buttons. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyBankBColorFeedback | Get the color of the bank B buttons as reported by the device. 0 = Off, 1 = Green, and 2 = Red. | |
| HardkeyWakesLCDOff | Disables hard key wake mode. In this mode the LCD will not wake from standby when a hard key is pressed | |
| HardkeyWakesLCDOffFeedback | Sig to indicate if the device will not wake from standby when a hard key is pressed | |
| HardkeyWakesLCDOn | Enables hard key wake mode. This signifies that the LCD will wake from standby when a hard key is pressed. | |
| HardkeyWakesLCDOnFeedback | Sig to indicate if the device will wake from standby when a hard key is pressed | |
| MJPEGViewerTouchedFeedback | Indicates that the MJPEG viewer is being touched. | |
| ProximitySensorActive | Report if the proximity sensor is active. | |
| ProximityWakesLCDOff | Sig to disable the feature of the LCD turning on when proximity is detected. | |
| ProximityWakesLCDOffFeedback | Sig to report if the proximity wakes LCD is set to off. | |
| ProximityWakesLCDOn | Sig to enable the LCD when proximity is detected. | |
| ProximityWakesLCDOnFeedback | Sig to report if the proximity wakes LCD is set to on. | |
| RedBrightness | Set the brightness level of the Red color for this device. | |
| RedBrightnessDown | Lowers the red backlight brightness by 1%. | |
| RedBrightnessFeedback | Get the brightness level of the Red color as reported by the device. | |
| RedBrightnessUp | Raises the red backlight brightness by 1%. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |