Room |
The RoomViewConnectedDisplay type exposes the following members.
| Name | Description | |
|---|---|---|
| AdminNewPassword | Sets the Admin Password, which overwrites the existing password. The password change takes place immediately. | |
| AdminPasswordDisableFeedback | Indicates that the Admin Password is disabled. | |
| AdminPasswordEnableFeedback | Indicates that the Admin Password is enabled. | |
| AssignedToName | Specifies the name of the individual, group or room where the projector is assigned. | |
| AssignedToNameFeedback | Reports the projector's current "assigned to" field. | |
| AvMuteOffFeedback | Indicates that AV muting is turned off. | |
| AvMuteOnFeedback | Indicates that AV muting is turned on. | |
| BrightnessLevel | Sets the video brightness level, if the display device supports it. | |
| BrightnessLevelFeedback | Reports the Brightness Level value. | |
| BrightnessMinusFeedback | Tracks the state of the BrightnessMinus Sig. | |
| BrightnessPlusFeedback | Tracks the state of the BrightnessPlus Sig. | |
| ColorLevel | Sets the video color level, if the display device supports it. | |
| ColorLevelFeedback | Reports the color Level value. | |
| ColorMinusFeedback | Tracks the state of the ColorMinus Sig. | |
| ColorPlusFeedback | Tracks the state of the ColorPlus Sig. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| ContrastLevel | Sets the video contrast level if the display device supports it. | |
| ContrastLevelFeedback | Reports the Contrast Level value. | |
| ContrastMinusFeedback | Tracks the state of the ContrastMinus Sig. | |
| ContrastPlusFeedback | Tracks the state of the ContrastPlus Sig. | |
| CoolingDownFeedback | Indicates that the projector is cooling down. | |
| CoolingDownProgressFeedback | Reports the progress of projector cool down progress from 100% to 0%. | |
| CurrentSourceFeedback | Reports the video type of the current source, e.g., HDMI, VGA, Composite, etc. | |
| DefaultGatewayFeedback | Reports The DefaultGateway address are given in dotted decimal notation (with or without leading zeros, depending on the projector). ex: XXX.XXX.XXX.XXX (e.g., 192.169.001.002) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DeviceIdStringFeedback | Reports the Device ID, which is a unique identifier that specifies the manufacturer, device type (e.g., projector), model number and firmware revision | |
| DhcpDisableFeedback | Indicates that the projector is currently disabled for DHCP (dynamic IP addressing). | |
| DhcpEnableFeedback | Indicates that the projector is currently enabled for DHCP (dynamic IP addressing). | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| DnsServerFeedback | Reports The DnsServer address are given in dotted decimal notation (with or without leading zeros, depending on the projector). ex: XXX.XXX.XXX.XXX (e.g., 192.169.001.002) | |
| EmergencyAlertCode | Sets the corresponding emergency alert, if the projector supports it. | |
| EmergencyAlertCodeReceivedFeedback | Reports the emergency alert code that the projector has received from RoomView Connected Display. | |
| EmergencyMessage | The emergency message that should correspond to the EmergencyAlertCode (max 251 characters). | |
| EmergencyMessageReceivedFeedback | Reports the emergency message received from RoomView. | |
| EmergencyMessageSupportedFeedback | Indicates that the projector supports emergency notification. | |
| FirmwareVersionFeedback | Reports the projector's firmware version, e.g., "Version 1.0" | |
| HelpMessage | Send help message to RoomView, if supported, to the Crestron Flash UI. | |
| HelpMessageReceivedFeedback | Reports the help message received from RoomView and, if applicable, from the Crestron Flash UI. | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| ImageMuteOffFeedback | Indicates that image muting is turned off. | |
| ImageMuteOnFeedback | Indicates that image muting is turned on. | |
| IpAddressFeedback | Reports The IP address are given in dotted decimal notation (with or without leading zeros, depending on the projector). ex: XXX.XXX.XXX.XXX (e.g., 192.169.001.002) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LampHoursFeedback | Reports lamp life of the display device, where 1d = 1 hour. | |
| LampHoursTextFeedback | Reports the lamp usage in Hours, e.g., "X" or "X Hours", where "X" is the lamp usage in hours. | |
| Location | Specifies the location of the projector, used as a generic field to be used as desired. | |
| LocationFeedback | Reports the projector's current "location" field. | |
| MacAddressFeedback | Reports The Mac address are given in dotted decimal notation (with or without leading zeros, depending on the projector). ex: XX:XX:XX:XX:XX:XX (e.g., 00:B0:D0:86:BB:F7) | |
| MuteOffFeedback | Indicates that the mute function is off. | |
| MuteOnFeedback | Indicates that the mute function is on. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| OnlineFeedback | Indicates whether the projector is online or offline with the control system; i.e. it's connected and communicating properly. | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PowerOffFeedback | Indicates that the projector power is off. | |
| PowerOnFeedback | Indicates that the projector power is on. | |
| PowerStatusFeedback | Reports the projector power status, e.g., Power On, Power Off, Warming Up, Cooling Down. | |
| PresetModeFeedback | Reports the projector's active preset mode. | |
| ProjectorName | Specifies the name of the projector, used as an informational field to identify the device. | |
| ProjectorNameFeedback | Reports the name of the projector. | |
| ProjectorPosition | Specifies the position of the projector in the current room, e.g., "Rear Ceiling", if supported | |
| ProjectorPositionFeedback | Reports the projector's current "position" field. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| ResolutionFeedback | Reports the resolution of the current source, e.g., "1024x768". | |
| RoomName | Specifies the name of the room where the projector is located. | |
| RoomNameFeedback | Reports the projector's current "room name" field. | |
| SharpnessLevel | Sets the video sharpness level if the display device supports it. | |
| SharpnessLevelFeedback | Reports the Sharpness Level value. | |
| SharpnessMinusFeedback | Tracks the state of the SharpnessMinus Sig. | |
| SharpnessPlusFeedback | Tracks the state of the SharpnessPlus Sig. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SourceNameTextFeedbackSigs | Reports the name of the source that's currently selected | |
| SourceNameTextSigs | Specifies the name of the corresponding source, used to rename the source if supported. | |
| SourceSelectFeedbackSigs | Indicates the source that's currently selected. | |
| SourceSelectSigs | Selects the corresponding source. | |
| StatusMessageFeedback | Reports the projector status message, e.g., Error or Lamp Over Life warnings | |
| SubnetMaskFeedback | Reports The SubnetMask address are given in dotted decimal notation (with or without leading zeros, depending on the projector). ex: XXX.XXX.XXX.XXX (e.g., 192.169.001.002) | |
| TemperatureFeedback | Reports the internal temperature of the projector, where 1 = 1 degree. | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserNewPassword | Sets the User Password, which overwrites the existing password. The password change takes place immediately. | |
| UserPasswordDisableFeedback | Indicates that the User Password is disabled. | |
| UserPasswordEnableFeedback | Indicates that the User Password is enabled. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| Volume | Sets the volume level from 0% (mute) to 100% (max volume). | |
| VolumeDownFeedback | Tracks the state of the VolumeDown Sig. | |
| VolumeFeedback | Reports the volume level. | |
| VolumeUpFeedback | Tracks the state of the VolumeUp Sig. | |
| WarmingUpFeedback | Indicates that the projector is warming up. | |
| WarmingUpProgressFeedback | Reports the progress of projector warm up from 0% to 100%. | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |