Am Properties |
The Am type exposes the following members.
| Name | Description | |
|---|---|---|
| BandSelectFeedback |
Indicates that this band is currently selected.
(Inherited from AmFmBase) | |
| ChannelFeedback |
The current channel or frequency.
(Inherited from TunerBase) | |
| Frequency |
Sets the tuner to the indicated FM frequency.
In US mode, valid analog values range from 8800d (for 88.00MHz) to 10800d (for 108.00MHz).
The values increment in 10d steps.
In European mode, valid analog values range from 8750d (for 87.50MHz) to 10800d (for 108.00MHz).
The values increment in 5d steps.
(Inherited from AmFmBase) | |
| MuteOffFeedback |
Indicates that audio is active (not muted).
(Inherited from TunerBase) | |
| MuteOnFeedback |
Indicates that AM/FM audio is muted.
(Inherited from TunerBase) | |
| PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| PresetModeFeedback |
Reports the current preset mode.
(Inherited from TunerBase) | |
| ScanningFeedback |
Indicates that the tuner is currently scanning (via scan +/-) or searching (via search+/-) for FM stations.
(Inherited from AmFmBase) | |
| SignalStrengthFeedback |
When signal strength reporting is enabled reports the signal strength.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SigStrengthDisableFeedback |
Indicates that FM signal strength reporting is currently disabled.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from AmFmBase) | |
| SigStrengthEnableFeedback |
Indicates that FM signal strength reporting is currently enabled.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from AmFmBase) | |
| StationMinus |
Tunes to the previous station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StationPlus |
Tunes to the next station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds, the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) |