Tsw |
The Tsw730System3ReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| BankAGreen | Property to set the Bank A of hardkey LEDs to the green color, where: "Bank A" refers to the five hardkeys on the left side of the touch screen Another way to set the Bank A hardkey LED color is via the "Color" analogs. On reboot the LEDs will start up at the last selected Bank A color. | |
| BankAGreenFeedback | Property to indicate the Bank A hardkey color is green. | |
| BankAOff | Property to turn off the Bank A of hardkey LEDs | |
| BankAOffFeedback | Property to track the Bank A hardkey LEDs are off | |
| BankARed | Property to set the Bank A of hardkey LEDs to the red color, where: "Bank A" refers to the five hardkeys on the left side of the touch screen Another way to set the Bank A hardkey LED color is via the "Color" analogs. On reboot the LEDs will start up at the last selected Bank A color. | |
| BankARedFeedback | Property to indicate the Bank A hardkey color is red. | |
| BankBGreen | Property to set the Bank B of hardkey LEDs to the green color, where: "Bank B" refers to the five hardkeys on the right side of the touch screen Another way to set the Bank B hardkey LED color is via the "Color" analogs. On reboot the LEDs will start up at the last selected Bank B color. | |
| BankBGreenFeedback | Property to indicate the Bank B hardkey color is green. | |
| BankBOff | Property to turn off the Bank B of hardkey LEDs | |
| BankBOffFeedback | Property to track the Bank B hardkey LEDs are off | |
| BankBRed | Property to set the Bank B of hardkey LEDs to the red color, where: "Bank B" refers to the five hardkeys on the right side of the touch screen Another way to set the Bank B hardkey LED color is via the "Color" analogs. On reboot the LEDs will start up at the last selected Bank B color. | |
| BankBRedFeedback | Property to indicate the Bank B hardkey color is red. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| GreenBrightness | Property to set the green color backlight brightness. Valid values range from 0% (minimum brightness) to 100% (maximum brightness). | |
| GreenBrightnessDown | Property to lower the green backlight brightness by 1%. If the property value remains true for 0.5 seconds the brightness will auto-adjust until the the property value becomes false or until it reaches the minimum value of 0%. | |
| GreenBrightnessFeedback | Property to report the green color backlight brightness. | |
| GreenBrightnessUp | Property to raise the green backlight brightness by 1%. If the property value remains true for 0.5 seconds the brightness will auto-increment until the property value becomes false or until it reaches the maximum value of 100%. | |
| HardkeyA1Color |
Property to set the LED color of the hardkey A1
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA1ColorFeedback |
Property to track the hardkey A1 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA2Color |
Property to set the LED color of the hardkey A2
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA2ColorFeedback |
Property to track the hardkey A2 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA3Color |
Property to set the LED color of the hardkey A3
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA3ColorFeedback |
Property to track the hardkey A3 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA4Color |
Property to set the LED color of the hardkey A4
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA4ColorFeedback |
Property to track the hardkey A4 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA5Color |
Property to set the LED color of the hardkey A5
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyA5ColorFeedback |
Property to track the hardkey A5 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB1Color |
Property to set the LED color of the hardkey B1
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB1ColorFeedback |
Property to track the hardkey B1 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB2Color |
Property to set the LED color of the hardkey B2
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB2ColorFeedback |
Property to track the hardkey B2 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB3Color |
Property to set the LED color of the hardkey B3
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB3ColorFeedback |
Property to track the hardkey B3 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB4Color |
Property to set the LED color of the hardkey B4
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB4ColorFeedback |
Property to track the hardkey B4 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB5Color |
Property to set the LED color of the hardkey B5
Valid values are as follows:
0 = Off
1 = Green
2 = Red
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyB5ColorFeedback |
Property to track the hardkey B5 LED color
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyBankAColor | Property to set the LED color of the Bank A of hardkeys, where: "Bank A" refers to the column of five hardkeys on the left side of the touch screen Valid values are as follows: 0 = Off 1 = Green 2 = Red | |
| HardkeyBankAColorFeedback | Property to track the value of the Bank A LED color. | |
| HardkeyBankBColor | Property to set the LED color of the Bank B of hardkeys, where: "Bank B" refers to the column of five hardkeys on the right side of the touch screen Valid values are as follows: 0 = Off 1 = Green 2 = Red | |
| HardkeyBankBColorFeedback | Property to track the value of the Bank B LED color. | |
| HardkeyWakesLCDOffFeedback |
Property to indicate that hardkey wake mode is off.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| HardkeyWakesLCDOnFeedback |
Property to indicate that hardkey wake mode is on.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| LEDA1Green | Property to set the A1 LED to green where: "A1" refer to a button on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA1GreenFeedback | Property to indicate the A1 LED color is green. | |
| LEDA1Off | Property to turn off the A1 LED | |
| LEDA1OffFeedback | Property to indicate the A1 LED is off | |
| LEDA1Red | Property to set the A1 LED to red where: "A1" refer to a button on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA1RedFeedback | Property to indicate the A1 LED color is red. | |
| LEDA2Green | Property to set the A2 LED to green, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA2GreenFeedback | Property to indicate the A2 LED color is green | |
| LEDA2Off | Property to turn off the A2 LED | |
| LEDA2OffFeedback | Property to indicate the A2 LED is off | |
| LEDA2Red | Property to set the A2 LED to red, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA2RedFeedback | Property to indicate the A2 LED color is red | |
| LEDA3Green | Property to set the A3 LED to green, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA3GreenFeedback | Property to indicate the A3 LED color is green | |
| LEDA3Off | Property to turn off the A3 LED | |
| LEDA3OffFeedback | LED A3 Property to indicate the A3 LED is off | |
| LEDA3Red | Property to set the A3 LED to red, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA3RedFeedback | Property to indicate the A3 LED color is red | |
| LEDA4Green | Property to set the A4 LED to green, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA4GreenFeedback | Property to indicate the A4 LED color is green | |
| LEDA4Off | Property to turn off the A4 LED | |
| LEDA4OffFeedback | Property to indicate the A4 LED is off | |
| LEDA4Red | Property to set the A4 LED to red, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA4RedFeedback | Property to indicate the A4 LED color is red | |
| LEDA5Green | Property to set the A5 LED to green, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA5GreenFeedback | Property to indicate the A5 LED color is green | |
| LEDA5Off | Property to turn off the A5 LED | |
| LEDA5OffFeedback | Property to indicate the A5 LED is off | |
| LEDA5Red | Property to set the A5 LED to red, where: "A1-A5" refer to the buttons on the left side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDA5RedFeedback | Property to indicate the A5 LED color is red | |
| LEDB1Green | Property to set the B1 LED to green, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB1GreenFeedback | Property to indicate the B1 LED color is green | |
| LEDB1Off | Property to turn off the B1 LED | |
| LEDB1OffFeedback | Property to indicate the B1 LED is off | |
| LEDB1Red | Property to set the B1 LED to red, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB1RedFeedback | Property to indicate the B1 LED color is red | |
| LEDB2Green | Property to set the B2 LED to green, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB2GreenFeedback | Property to indicate the B2 LED color is green | |
| LEDB2Off | Property to turn off the B2 LED | |
| LEDB2OffFeedback | Property to indicate the B2 LED is off | |
| LEDB2Red | Property to set the B2 LED to red, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB2RedFeedback | Property to indicate the B2 LED color is red | |
| LEDB3Green | Property to set the B3 LED to green, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB3GreenFeedback | Property to indicate the B3 LED color is green | |
| LEDB3Off | Property to turn off the B3 LED | |
| LEDB3OffFeedback | Property to indicate the B3 LED is off | |
| LEDB3Red | Property to set the B3 LED to red, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB3RedFeedback | Property to indicate the B3 LED color is red | |
| LEDB4Green | Property to set the B4 LED to green, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB4GreenFeedback | Property to indicate the B4 LED color is green | |
| LEDB4Off | Property to turn off the B4 LED | |
| LEDB4OffFeedback | Property to indicate the B4 LED is off | |
| LEDB4Red | Property to set the B4 LED to red, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB4RedFeedback | Property to indicate the B4 LED color is red | |
| LEDB5Green | Property to set the B5 LED to green, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB5GreenFeedback | Property to indicate the B5 LED color is green | |
| LEDB5Off | Property to turn off the B5 LED | |
| LEDB5OffFeedback | Property to indicate the B5 LED is off | |
| LEDB5Red | Property to set the B5 LED to red, where: "B1-B5" refer to the buttons on the right side of the touch screen Another way to turn the hardkey on and off is via the "Color" analogs. On reboot the LEDs will start up at the last selected LED state. | |
| LEDB5RedFeedback | Property to indicate the B5 LED color is red | |
| ProximitySensorActiveFeedback |
Property to indicate that the built-in proximity sensor has detected an object within range.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| ProximityWakesLCDOff |
Property to disable proximity wake mode. In this mode the LCD will not wake from standby when the proximity sensor senses
an object within range.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| ProximityWakesLCDOffFeedback |
Property to indicate that proximity wake mode is off.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| ProximityWakesLCDOn |
Property to enable proximity wake mode. This signifies that the LCD will wake from standby when the proximity sensor senses
an object within range.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| ProximityWakesLCDOnFeedback |
Property to indicate that proximity wake mode is on.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| RedBrightness | Property to set the red color backlight brightness. Valid values range from 0% (minimum brightness) to 100% (maximum brightness). | |
| RedBrightnessDown | Property to lower the red backlight brightness by 1%. If the property value remains true for 0.5 seconds the brightness will auto-adjust until the the property value becomes false or until it reaches the minimum value of 0%. | |
| RedBrightnessFeedback | Property to report the red color backlight brightness. | |
| RedBrightnessUp | Property to raise the red backlight brightness by 1%. If the property value remains true for 0.5 seconds the brightness will auto-increment until the property value becomes false or until it reaches the maximum value of 100%. | |
| SensorAActiveFeedback |
Property to indicate that a Crestron GLS-Series occupancy sensor connected to voltage-sensing input Port A
of the touch screen has been triggered.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| SensorBActiveFeedback |
Property to indicate that a Crestron GLS-Series occupancy sensor connected to voltage-sensing input Port B
of the touch screen has been triggered.
(Inherited from Tsw73xSystem3ReservedSigs) | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| SystemMediaMuteFeedback | Property to report if the audio is muted. | |
| SystemMediaUnmuteFeedback | Property to report if the audio is unmuted. | |
| SystemMediaVolume | Property to set the system media volume level for any streaming media such as H264. | |
| SystemMediaVolumeDown | Property to decrease the volume. | |
| SystemMediaVolumeFeedback | Property to report the system media volume level. | |
| SystemMediaVolumeUp | Property to increase the volume. | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |