Click or drag to resize

BACnetRemoteAnalogOutputObject Class

Remote BACnet Device Analog Output Object class.

This class will trigger BACnetObjectChange event.

Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public sealed class BACnetRemoteAnalogOutputObject : BACnetRemoteAnalogValueOutputObjectCommon

The BACnetRemoteAnalogOutputObject type exposes the following members.

Constructors
 NameDescription
Public methodBACnetRemoteAnalogOutputObject(UInt32) Constructor to create new BACnetRemoteAnalogOutputObject class object.
Public methodBACnetRemoteAnalogOutputObject(UInt32, Boolean, UInt32, eBACnetPriorityType, UInt32, Boolean, UInt32) Constructor to create new BACnetRemoteAnalogOutputObject class object.
Top
Properties
 NameDescription
Public propertyCovIncrementFeedback Property to report the minimum change in ValueFeedback that will trigger Change Of Value notification.

The BACnetObjectChange event will trigger with CovIncrementChangedEventId.


(Inherited from BACnetRemoteAnalogInputObject)
Public propertyCovLifetime Parameter to specify the default Change of Value (COV) notification lifetime in minutes. Default value is 30 minutes.
(Inherited from BACnetRemoteCommonObject)
Public propertyDecimal Parameter that specifies the number of digits to the right of the decimal point for ValueFeedback or PresentValue. Valid values are as follows: 0 (indicates present value is a whole number), 1, 2, 3.
(Inherited from BACnetRemoteAnalogInputObject)
Public propertyDisposed Property to indicate if the Device has been disposed.
(Inherited from BACnetObject)
Public propertyEventStateFeedback Property to indicate the event state associated with the object.

This property will trigger BACnetObjectChange event with EventStateFeedbackEventId.


(Inherited from BACnetRemoteCommonObject)
Public propertyId A 22-bit decimal number that serves as an unique address of the object within the BACnet device. Valid range from 0 to 4194302.
(Inherited from BACnetObject)
Public propertyOutOfServiceFeedback Property to report whether the BACnet object is functioning as expected or not. true means the object is out of service. false means it is in service.

This property will trigger BACnetObjectChange event with OutOfServiceChangedEventId.


(Inherited from BACnetRemoteCommonObject)
Public propertyParent The parent that a given object was added to.
(Inherited from BACnetObject)
Public propertyPresentValue Property to report the Present Value information of the object.

This property will trigger BACnetObjectChange event with event ID PresentValueFeedbackEventId.


(Inherited from BACnetRemoteAnalogInputObject)
Public propertyPresentValueChangedFeedback Property to report whether there has been any change in the ValueFeedback. Pulses when ValueFeedback value changes. This property changes from false to true and again to false when PresentValue is changed.

This property will trigger BACnetObjectChange event with PresentValueChangedEventId.


(Inherited from BACnetRemoteAnalogInputObject)
Public propertyPriority Parameter to specify the BACnet priority level at which the object will communicate. There are 16 levels of priority, where level 1 denotes the highest priority and level 16 - the lowest.
(Inherited from BACnetRemoteCommonObject)
Public propertyPriorityForPresentValueFeedback Indicates the write priority of the present value recently received from the remote device. This property value is updated either by calling PollForValue method or by sending an RPM request for this object internally from the BACnet Stack to the Host Device. This property is not supported on firmware with version less than "4.0003.00005" on VC4 platforms. This property is not supported on firmware with version less than "2.8004.00001" on 4-Series platform. This property is not supported on 3-Series platforms.

This property will trigger BACnetObjectChange event with PriorityForPresentValueFeedbackEventId.


(Inherited from BACnetRemoteAnalogValueOutputObjectCommon)
Public propertyRelinquishDefault Property to set the Relinquish Default. Reliquish Default is a BACnet Property that indicates the default Present Value and will be assigned to the Present Value property when all the Priority Array entries are NULL.
(Inherited from BACnetRemoteAnalogValueOutputObjectCommon)
Public propertyScanRate Parameter to specify the default time interval (in seconds) for polling the device properties. This parameter will be ignored if the user chooses to set the polling interval by using the VariableScanRate. Default value = 30s.
(Inherited from BACnetRemoteCommonObject)
Public propertySigned Parameter that indicates if ValueFeedback or PresentValue is signed or unsigned number. true = signed number; false = unsigned number. Default value is false.
(Inherited from BACnetRemoteAnalogInputObject)
Public propertyStatusFlagsFeedback Property to report the state of the four Boolean flags that indicate the general "health" of the remote object.

This property will trigger BACnetObjectChange event with StatusFlagsFeedbackEventId.


(Inherited from BACnetRemoteCommonObject)
Public propertySubscribeCov Parameter that indicates if the BACnet device subscribes to Change of Value (COV) notification. Valid values as follows: true = subscribes to COV notification; false = Does not subscribe COV notification Default-value = true (subscribes to COV notification)
(Inherited from BACnetRemoteCommonObject)
Public propertyType Type of the BACnet object.
(Inherited from BACnetObject)
Public propertyUnitsFeedback Property to report the correct engineering unit for ValueFeedback.

This property will trigger BACnetObjectChange event with UnitsFeedbackEventId.


(Inherited from BACnetRemoteAnalogInputObject)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from BACnetObject)
Public propertyVariableScanRate When non-zero, will cause the BACnet stack to poll for the value periodically. When set to zero will poll for value at the specified interval set by the ScanRate parameter.
(Inherited from BACnetRemoteCommonObject)
Public propertyWritePriority Write priority of this object.
(Inherited from BACnetRemoteAnalogValueOutputObjectCommon)
Top
Methods
 NameDescription
Public methodDispose Clean up of resources.
(Inherited from BACnetObject)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodPollForValue Method that causes the BACnet stack to request the current property value from the Remote Object when changed from false to true.
(Inherited from BACnetRemoteCommonObject)
Public methodRelinquish Method to relinquish control to the next highest priority object in the priority array.
(Inherited from BACnetRemoteCommonObject)
Public methodToString String representation of the BACnetObject.
(Inherited from BACnetObject)
Top
Events
 NameDescription
Public eventBACnetObjectChange Event triggered when the BACnetObject reports information to the Control System.
(Inherited from BACnetObject)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also