Click or drag to resize

UcEngineFlexZoomReservedSigs Properties

The UcEngineFlexZoomReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyAutoZoomMode Property to set the auto zoom mode.
Public propertyAutoZoomModeFeedback Property to indicate the auto zoom mode.

The DeviceExtenderSigChange event will trigger with UShortChange and AutoZoomModeFeedback.

Public propertyAutoZoomSpeed Property to set the auto zoom speed.
Public propertyAutoZoomSpeedFastestFeedback Property to indicate if the auto zoom speed is fastest. True = auto zoom at fastest speed; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and AutoZoomSpeedFastestFeedback.

Public propertyAutoZoomSpeedFastFeedback Property to indicate if the auto zoom speed is fast. True = auto zoom at fast speed; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and AutoZoomSpeedFastFeedback.

Public propertyAutoZoomSpeedFeedback Property to indicate the auto zoom speed.

The DeviceExtenderSigChange event will trigger with UShortChange and AutoZoomSpeedFeedback.

Public propertyAutoZoomSpeedMediumFeedback Property to indicate if the auto zoom speed is medium. True = auto zoom at medium speed; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and AutoZoomSpeedMediumFeedback.

Public propertyAutoZoomSpeedSlowestFeedback Property to indicate if the auto zoom speed is at the slowest. True = auto zoom at the slowest speed; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and AutoZoomSpeedSlowestFeedback.

Public propertyAutoZoomSpeedSlowFeedback Property to indicate if the auto zoom speed is slow. True = auto zoom at slow speed; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and AutoZoomSpeedSlowFeedback.

Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyCameraConnectedFeedback Property to indicate if the camera is connected or not.

The DeviceExtenderSigChange event will trigger with BoolChange and CameraConnectedFeedback.

Public propertyCameraFirmwareVersionFeedback This property is to report UC-Engine camera firmware version.

The DeviceExtenderSigChange event will trigger with StringChange and CameraFirmwareVersionFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyCameraNameFeedback This property is to report UC-Engine camera name.

The DeviceExtenderSigChange event will trigger with StringChange and CameraNameFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyCaptureColorMode Property to capture the color mode.
Public propertyCaptureColorModeAutoFeedback Property to indicate if the capturing color mode is auto or not: True = Auto Capturing of color mode is enabled; False = Auto Capturing of color mode is disabled

The DeviceExtenderSigChange event will trigger with BoolChange and CaptureColorModeAutoFeedback.

Public propertyCaptureColorModeFeedback Property to indicate the capture color mode.

The DeviceExtenderSigChange event will trigger with UShortChange and CaptureColorModeFeedback.

Public propertyCaptureColorModeFullFeedback Property to indicate if the capturing color mode is Full or not. True = Full Capturing of color mode is enabled; False = Full Capturing of color mode is disabled.

The DeviceExtenderSigChange event will trigger with BoolChange and CaptureColorModeFullFeedback.

Public propertyCaptureColorModeLimitedFeedback Property to indicate if the capturing color mode is limited or not. True = Capturing color mode is limited; False = Captureing color mode is not limited.

The DeviceExtenderSigChange event will trigger with BoolChange and CaptureColorModeLimitedFeedback.

Public propertyHuddlyCameraConnectedFeedback Property to indicate if the Huddly IQ camera is plugged into the system. True = Huddly IQ camera plugged; False = Huddly IQ camera not connected.

The DeviceExtenderSigChange event will trigger with BoolChange and HuddlyCameraConnectedFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyHuddlyCameraVersionFeedback Property to return the hardware version number of the Huddly IQ camera, if connected.

The DeviceExtenderSigChange event will trigger with StringChange and HuddlyCameraVersionFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyHuddlyRoomOccupantCountFeedback Property to return the number of occupants that the Huddly IQ camera reports in the visible space. This value is only available when the camera is active in a meeting or call, and when Huddly Genius Framing is enabled.

The DeviceExtenderSigChange event will trigger with UShortChange and HuddlyRoomOccupantCountFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyHuddlySerialNumberFeedback Property to return the serial number of the Huddly IQ camera if connected.

The DeviceExtenderSigChange event will trigger with StringChange and HuddlySerialNumberFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyHuddlySoftwareVersionFeedback Property to return the firmware version number of the Huddly IQ camera, if connected.

The DeviceExtenderSigChange event will trigger with StringChange and HuddlySoftwareVersionFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyHuddlyUpgradeStatusFeedback This property is reserved for Future Use.

The DeviceExtenderSigChange event will trigger with StringChange and HuddlyUpgradeStatusFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyImageMode Property to set the Image Mode. Note: The system will automatically reboot as soon as this join is sent. For this reason be advised, this is a configuration setting and not meant to be used as an on the fly change. For valid values refer UcEngineReservedSigseImageMode.
(Inherited from UcEngineReservedSigs)
Public propertyImageModeFeedback Property to report the current Image Mode. For valid values refer UcEngineReservedSigseImageMode.

The DeviceExtenderSigChange event will trigger with UShortChange and ImageModeFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyImageModeZoomFeedback Property to indicate Zoom Image Mode is enabled. Note: The system will automatically reboot as soon as this property value is sent. For this reason be advised, this is a configuration setting and not meant to be used as an on the fly change. true = Zoom Image Mode enabled; false = Zoom Image Mode disabled

The DeviceExtenderSigChange event will trigger with BoolChange and ImageModeZoomFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyJabraAutoFocusIntelligentFeedback Property to indicate jabra auto focus intelligence is enabled. True = enabled; False = disabled.

The DeviceExtenderSigChange event will trigger with BoolChange and JabraAutoFocusIntelligentFeedback.

Public propertyJabraAutoFocusVirtualDirectorFeedback Property to indicate jabra auto focus virtual director is enabled True = enabled ; False = disabled.

The DeviceExtenderSigChange event will trigger with BoolChange and JabraAutoFocusVirtualDirectorFeedback.

Public propertyLogitechSyncVersionFeedback Property to indicate the logitech sync version.

The DeviceExtenderSigChange event will trigger with StringChange and LogitechSyncVersionFeedback.

Public propertyOccupancySensorConnectedFeedback Property to indicate if the occupancy sensor is connected. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and OccupancySensorConnectedFeedback.

Public propertyOccupancySensorDisconnectedFeedback Property to indicate if the occupancy sensor is disconnected. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and OccupancySensorDisconnectedFeedback.

Public propertyOccupancyStatusOccupiedFeedback Property to indicate if the Occupancy status is occupied. True = Occupancy status is occupied; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and OccupancyStatusOccupiedFeedback.

Public propertyOccupancyStatusVacantFeedback Property to indicate if the Occupancy status is vacant. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and OccupancyStatusVacantFeedback.

Public propertyPanelOccupancyOccupiedFeedback Property to indicate if the panel occupancy is occupied or not. True = panel occupancy is occupied; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PanelOccupancyOccupiedFeedback.

Public propertyPanelOccupancyVacantFeedback Property to indicate if the panel occupancy is vacant or not. True = panel occupancy is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PanelOccupancyVacantFeedback.

Public propertyPolycomTalkerTrackingDisabledFeedback Property to indicate if the polycom talker tracking disabled. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingDisabledFeedback.

Public propertyPolycomTalkerTrackingEnableAnalog Property to enable polycom talker tracking in analog mode.
Public propertyPolycomTalkerTrackingEnableAnalogFeedback Property to indicate the polycom talker tracking state.

The DeviceExtenderSigChange event will trigger with UShortChange and PolycomTalkerTrackingEnableAnalogFeedback.

Public propertyPolycomTalkerTrackingEnableGroupFramingFeedback Property to indicate if the polycom talker tracking is group framing is enabled. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingEnableGroupFramingFeedback.

Public propertyPolycomTalkerTrackingEnableTalkerFramingFeedback Property to indicate if the taker tracking talker framing is enabled. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingEnableTalkerFramingFeedback.

Public propertyPolycomTalkerTrackingFrameSizeAnalog Property to set polycom talker tracking frame size in analog values.
Public propertyPolycomTalkerTrackingFrameSizeAnalogFeedback Property to indicate the polycom talker tracking frame size.

The DeviceExtenderSigChange event will trigger with UShortChange and PolycomTalkerTrackingFrameSizeAnalogFeedback.

Public propertyPolycomTalkerTrackingHighSensitivityFeedback Property to indicate if the polycom talker tracking sensitivity is high. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingHighSensitivityFeedback.

Public propertyPolycomTalkerTrackingLowSensitivityFeedback Property to indicate if the polycom talker tracking sensitivity is low. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingLowSensitivityFeedback.

Public propertyPolycomTalkerTrackingMediumMarginFeedback Property to indicate if the polycom talker tracking margin is medium. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingMediumMarginFeedback.

Public propertyPolycomTalkerTrackingMediumSensitivityFeedback Property to indicate if the polycom talker tracking sensitivity is medium. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingMediumSensitivityFeedback.

Public propertyPolycomTalkerTrackingSensitivityAnalog Property to set the polycom talker tracking sensitivity in analog values.
Public propertyPolycomTalkerTrackingSensitivityAnalogFeedback Property to indicate the polycom talker tracking sensitivity.

The DeviceExtenderSigChange event will trigger with UShortChange and PolycomTalkerTrackingSensitivityAnalogFeedback.

Public propertyPolycomTalkerTrackingTightMarginFeedback Property to indicate if the polycom talker tracking margin is tight. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingTightMarginFeedback.

Public propertyPolycomTalkerTrackingWideMarginFeedback Property to indicate if the polycom talker tracking margin is wide. True = Occupancy status is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and PolycomTalkerTrackingWideMarginFeedback.

Public propertyProvisioningVersionFeedback Property to return the Microsoft Teams image provisioning number.
(Inherited from UcEngineReservedSigs)
Public propertySensorOccupancyOccupiedFeedback Property to indicate if the sensor occupancy is occupied or not. True = Sensor occupancy is occupied; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and SensorOccupancyOccupiedFeedback.

Public propertySensorOccupancyVacantFeedback Property to indicate if the sensor occupancy is vacant or not. True = Sensor occupancy is vacant; False = No effect.

The DeviceExtenderSigChange event will trigger with BoolChange and SensorOccupancyVacantFeedback.

Public propertySoftwareBuildFeedback Property to return the Microsoft Teams software version number.

The DeviceExtenderSigChange event will trigger with StringChange and SoftwareBuildFeedback.


(Inherited from UcEngineReservedSigs)
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyTeamsImageModeEnabledFeedback Property to indicate if the Teams Image Mode is enabled. true = Teams Image Mode enabled; false = Teams Image Mode disabled

The DeviceExtenderSigChange event will trigger with BoolChange and TeamsImageModeEnabledFeedback.


(Inherited from UcEngineReservedSigs)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyWindowsBuildFeedback Property to return the build number of the Windows install on the UC-ENGINE.

The DeviceExtenderSigChange event will trigger with StringChange and WindowsBuildFeedback.


(Inherited from UcEngineReservedSigs)
Public propertyZoomNightlyRebootObsolete.
Method to reboot zoom nightly.
Public propertyZoomNightlyRebootFeedback Property to report zoom nightly reboot.

The DeviceExtenderSigChange event will trigger with BoolChange and ZoomNightlyRebootFeedback.

Top
See Also