Sdi |
The SdiPort type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioGroup1DetectedFeedback |
Indicates that the corresponding embedded audio group 1 is detected at the SDI input.
An audio group consists of 4 channels of audio. The output will remain high for as long as the audio group is detected.
'true' = Audio group detected; 'false = Audio group not detected.
The DMInputChange event will trigger with AudioGroup1DetectedEventId when a part of a switcher. The BaseEvent event will trigger with AudioGroup1DetectedEventId when a part of a DMCI. | |
| AudioGroup2DetectedFeedback |
Indicates that the corresponding embedded audio group 2 is detected at the SDI input.
An audio group consists of 4 channels of audio. The output will remain high for as long as the audio group is detected.
'true' = Audio group detected; 'false = Audio group not detected.
The DMInputChange event will trigger with AudioGroup2DetectedEventId when a part of a switcher. The BaseEvent event will trigger with AudioGroup2DetectedEventId when a part of a DMCI. | |
| AudioGroup3DetectedFeedback |
Indicates that the corresponding embedded audio group 3 is detected at the SDI input.
An audio group consists of 4 channels of audio. The output will remain high for as long as the audio group is detected.
'true' = Audio group detected; 'false = Audio group not detected.
The DMInputChange event will trigger with AudioGroup3DetectedEventId when a part of a switcher. The BaseEvent event will trigger with AudioGroup3DetectedEventId when a part of a DMCI. | |
| AudioGroup4DetectedFeedback |
Indicates that the corresponding embedded audio group 4 is detected at the SDI input.
An audio group consists of 4 channels of audio. The output will remain high for as long as the audio group is detected.
'true' = Audio group detected; 'false = Audio group not detected.
The DMInputChange event will trigger with AudioGroup4DetectedEventId when a part of a switcher. The BaseEvent event will trigger with AudioGroup4DetectedEventId when a part of a DMCI. | |
| AudioPrimaryAudioGroupSelect | Selects the audio group. This will route audio channels 1 and 2 only (not channels 3 and 4) to the SDI output, the HDMI output and the audio downmix path. Valid values range from 1 (Audio Group 1) to 4 (Audio Group 4). | |
| AudioPrimaryAudioGroupSelectFeedback |
Reports the active primary audio group.
The DMInputChange event will trigger with PrimaryAudioGroupSelectEventId when a part of a switcher. The BaseEvent event will trigger with PrimaryAudioGroupSelectEventId when a part of a DMCI. | |
| Card |
Get the card that this stream is apart of.
(Inherited from DmCardStreamBase) | |
| CorrectNoncompliantAudioFeedback |
Indicates that audio correction is being applied. The output remains high for as long as audio correction is on.
'true' = Audio correction is on; 'false' = No audio correction.
The DMInputChange event will trigger with CorrectNoncompliantAudioEventId when a part of a switcher. The BaseEvent event will trigger with CorrectNoncompliantAudioEventId when a part of a DMCI. | |
| ForceMValue | Forces the M value of the video source signal (which is divided into the frame rate) to 1.000 In most cases the M value should be left at the auto-detect setting. Otherwise, the M value should only be changed if the source audio is noncompliant (NoncompliantAudioDetectedFeedback is 'true') and audio correction is resulting in video problems. | |
| ForceMValueFeedback |
Reports the current M value setting.
The DMInputChange event will trigger with ForceMEventId when a part of a switcher. The BaseEvent event will trigger with ForceMEventId when a part of a DMCI. | |
| InputOutput |
Get the DMOutput or DMInput that this stream is apart of. This is useful in switchers like the DMPS3.
(Inherited from DmCardStreamBase) | |
| NoncompliantAudioDetectedFeedback |
Indicates that the audio source is not compliant with SMPTE SDI specifications.
The output remains 'true' for as long as noncompliant audio is detected.
Noncompliant audio is corrected by default.
'true' = Audio noncompliant; 'false' = Audio OK
The DMInputChange event will trigger with NoncompliantAudioDetectedEventId when a part of a switcher. The BaseEvent event will trigger with NoncompliantAudioDetectedEventId when a part of a DMCI. | |
| Parent |
The parent that a given object was added to.
(Inherited from DmCardStreamBase) | |
| PreventNoncompliantAudioCorrectionFeedback |
Indicates that audio correction is being prevented. The output remains 'true for as long as audio correction is off.
'true' = Audio correction is off; 'false' = Audio correction is on.
The DMInputChange event will trigger with PreventNoncompliantAudioCorrectionEventId when a part of a switcher. The BaseEvent event will trigger with PreventNoncompliantAudioCorrectionEventId when a part of a DMCI. | |
| SourceSyncDetectedFeedback |
Indicates that video sync levels are detected at the HDMI input. The output remains 'true' for as long as sync is detected.
'true' = Sync detected; 'false' = Sync not detected.
The DMInputChange event will trigger with SourceSyncEventId when a part of a switcher. The BaseEvent event will trigger with SourceSyncEventId when a part of a DMCI. (Inherited from VideoInput) | |
| Type |
Get the type for this stream.
(Inherited from DmCardStreamBase) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DmCardStreamBase) | |
| VideoAttributes |
Basic video attribute information for this stream.
Feedbacks for this property will trigger the AttributeChange event. (Inherited from VideoInput) | |
| VideoType |
Reports the video source type.
The DMInputChange event will trigger with VideoTypeEventId when a part of a switcher. The BaseEvent event will trigger with VideoTypeEventId when a part of a DMCI. (Inherited from VideoInput) |