Vpg |
The Vpg24 type exposes the following members.
| Name | Description | |
|---|---|---|
| AutoModeFeedback |
Indicates that the panel is currently set to auto mode.
The output remains true for as long as the panel is in auto mode. AutoModeFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| FingerOnlyModeFeedback |
Property to indicate the finger only mode is active.
The output will remain true for as long as finger only mode is active. FingerOnlyModeFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| HidUseAlternate |
Property to select the destination Alternate where HID data will be sent.
The selection will be active for as long as the input is true.
If both UseDmNetForHid and HidUseAlternate inputs are true, the DM Net address takes precedence. HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.When set to "Alternate", the HID data will be routed to the alternate address specified by UsbAlternateHidControl (Inherited from Vpg24Base) | |
| HidUseAlternateFeedback |
Property to indicate HID use alternate feedback status.
Indicates the current HID destination is Alternate. The output remains true for as long as the address is active. HidUseAlternateFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| HidUseKm |
Property to select the destination where keyboard/mouse (KM) data will be sent, as follows:
When the input is true, the KM data will be sent to the address specified by UsbKmHidControl. This will break out the KM data to the VMK-WIN. When the input is false, the KM data will be sent to the "DM Net" address (when UseDmNetForHidFeedback = true) or the "Alternate" address (when HidUseAlternateFeedback= true). (Inherited from Vpg24Base) | |
| HidUseKmFeedback | Indicates the current HID keyboard/mouse setting. The output remains true for as long as the setting is selected. true = Breakaway destination selected. false = DM Net or Alternate destination selected HidUseKmFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LcdBrightness |
Property to set the LCD brightness.
Sets the LCD brightness level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.(Inherited from Vpg24Base) | |
| LcdBrightnessDown | Lowers the LCD backlight brightness by 1% on each pulse If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-decrement until the input goes false or until it reaches the minimum value of 0%. (Inherited from Vpg24Base) | |
| LcdBrightnessFeedback |
Property to report the LCD brightness level.
LcdBrightnessFeedbackEventIDis triggered for this property. (Inherited from Vpg24Base) | |
| LcdBrightnessUp | Raises the LCD backlight brightness by 1% on each pulse. If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-increment until the input goes false or until it reaches the maximum value of 100%. (Inherited from Vpg24Base) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PenFingerModeFeedback |
Property to indicate the pen finger mode is active.
Indicates that the panel is set to dual mode. The output remains true for as long as dual mode is active. PenFingerModeFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| PenOffDockFeedback | Indicates that the pen is currently undocked. The output remains true for as long as the pen is undocked. PenOffDockFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| PenOnDockFeedback | Indicates that the pen is currently docked. The output remains true for as long as the pen is docked. PenOnDockFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| PenOnlyModeFeedback |
Property to indicate the pen only mode is active.
The output will remain true for as long as pen only mode is active PenOnlyModeFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| RebootButtonHeldFeedback | Indicates that the hardkey on the V-Panel is pressed. The output remains true for the duration of the button press. RebootButtonHeldFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| RebootRequestedFeedback | Indicates that the hardkey on the V-Panel has been pressed for 5 seconds, thereby requesting a reboot of the V-Panel. The output will pulse when the reboot request is received. RebootRequestedFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SleepWakeManager |
Sleep wake manager.
(Inherited from Vpg24Base) | |
| SourceDigitalHdcpSourceFeedback | Indicates the presence of HDCP. The output remains true for as long as HDCP is detected. SourceDigitalHdcpSourceFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceDigitalNoInputFlagFeedback | Indicates that there is no HDMI source being routed to the DM input of the V-Panel. The output remains true for as long as no digital source is detected. SourceDigitalNoInputFlagFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceFramesPerSecondFeedback |
Property to report the frame rate of the input source in 0.01 Hertz
(1d = 0.01 Hz), e.g., 4989d = 49.89Hz.
Reported values range from 0d to 8500d. SourceFramesPerSecondFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceHorizontalResolutionFeedback |
Property to report the horizontal resolution of the input source in pixels
(1d = 1 pixel). Reported values range from 0d to 1920d.
SourceHorizontalResolutionFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceVerticalResolutionFeedback |
Property to report the vertical resolution of the input source in lines
(1d = 1 line}. Reported values range from 0d to 1200d.
SourceVerticalResolutionFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceVideoIsInterlacedFeedback |
Indicates that the digital video source is interlaced.
SourceVideoIsInterlacedFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| SourceVideoLockedStatusFeedback |
Indicates that the video image has been locked.
The output remains true for as long as the video is locked.
When the output is false, this indicates no picture.
SourceVideoLockedStatusFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| StandbyTimeout |
Property to set the standby timeout (1d = 1 minute).
The standby timeout is the period from the last use of the touchscreen
before going into standby mode (screen display is off but power is on).
Valid values range from 0d (no standby timeout) to 120d (120 minutes)
(Inherited from Vpg24Base) | |
| StandbyTimeoutDown | Decrements the screen display standby timeout by one minutes with each pulse. If the input remains true for 0.5 seconds, the standby timeout period will auto-decrement until the input goes false or until it reaches 0 minutes. (Inherited from Vpg24Base) | |
| StandbyTimeoutFeedback |
Property to report the standby timeout period.
StandbyTimeoutFeedbackEventIDis triggered for this property. (Inherited from Vpg24Base) | |
| StandbyTimeoutUp | Increments the screen display standby timeout by one minute with each pulse. If the input remains true for 0.5 seconds,the standby timeout period will auto-increment until the input goes false or until it reaches the maximum value of 120 minutes. (Inherited from Vpg24Base) | |
| TouchCalibrationCompleteFeedback |
Property to indicate touch calibration complete feedback status.
Pulses to indicate that the touch calibration procedure is complete or has timed out. TouchCalibrationCompleteFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationFailFeedback |
Property to report the result of the touch calibration procedure.
When "Fail" is true, this indicates that calibration failed. The output remains true until TouchCalibrationStart is set to true again.TouchCalibrationFailFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationInProgressFeedback |
Property to report that the touch calibration procedure is in progress.
The output becomes true when TouchCalibrationStart is set to true and remains true for as long as the procedure is in progress. TouchCalibrationInProgressFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationPassFeedback |
Property to report the result of the touch calibration procedure.
When "Pass" is true, this indicates that calibration was successful. The output remains true until TouchCalibrationStart is set to true again.TouchCalibrationPassFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationPositionXFeedback |
Property to report the current X coordinates of the icon during touch calibration.
TouchCalibrationPositionXFeedbackEventIDis triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationPositionYFeedback |
Property to report the current coordinates of the icon during touch calibration.
TouchCalibrationPositionYFeedbackEventIDis triggered for this property. (Inherited from Vpg24Base) | |
| TouchCalibrationStartFeedback |
Property to indicate touch calibration start feedback status.
Indicates that touch calibration has been initiated by a console command. The output remains true for as long as touch calibration is in progress. TouchCalibrationStartFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UsbAlternateHidControl |
Property to set the destination for HID data when the address is set to "Alternate"
(HidUseAlternateFeedback = true).
(Inherited from Vpg24Base) | |
| UsbAlternateHidControlFeedback |
Property to report the current Alternate address.
UsbAlternateHidControlFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| UsbDeviceDetectedFeedback |
Indicates that a device is connected at the USB HID port. The output
remains true for as long as the device is detected.
UsbDeviceDetectedFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| UsbHidControl |
Property to set the destination for HID data when the address is set to "DM Net"
(UseDmNetForHidFeedback = true).
(Inherited from Vpg24Base) | |
| UsbHidControlFeedback |
Property to report the current HID address.
UsbHidControlFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| UsbKmHidControl |
Property to set the destination for HID data when the address is set to "KM"
(HidUseKmFeedback = true). This address is used
when the KM data is broken out to a VMK-WIN.
This input should be connected to the corresponding output (UsbHidControl)
of the VMK-WIN Configuration slot.
(Inherited from Vpg24Base) | |
| UsbKmHidControlFeedback |
Property to report the current KM address.
UsbKmHidControlFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| UseDmNetForHid |
Property to select the destination DM Net where HID data will be sent.
The selection will be active for as long as the input is true.
If both UseDmNetForHid and HidUseAlternate inputs are true, the DM Net address takes precedence. HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.When set to "DM Net", the HID data will be routed via DM Net to the address specified by UsbHidControl (Inherited from Vpg24Base) | |
| UseDmNetForHidFeedback |
Property to indicate Use DM Net for HID feedback status.
Indicates the current HID destination (DM Net). The output remains true for as long as the address is active. UseDmNetForHidFeedbackEventID is triggered for this property. (Inherited from Vpg24Base) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |