Click or drag to resize

Dge2System2ReservedSigs Properties

The Dge2System2ReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyDmOutputHdcpErrorStatusFeedback Reports the HDCP error status as follows: 0d = No Error 1d = Maximum HDCP keys exceeded 2d = Link not stable 3d = HDCP unauthenticated
Public propertyDmOutputHdcpStateFeedback Reports the status of HDCP authentication at the corresponding output, as follows: 0d = HDCP not required 1d = Downstream sink (i.e., the DM-TX-201C) not ready 2d = Downstream sink ready 3d = Downstream sink timeout 50d = Unauthenticated 51d = Unauthenticated (maximum HDCP keys exceeded) 52d = Unauthenticated (maximum HDCP device connection levels exceeded) 53d = Authenticated 54d = No downstream sink
Public propertyEnterIpTableSetupFeedback Indicates that the "IP Table Setup" dialog is open.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyEnterNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is open.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyEnterNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is open.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyEnterSelectProjectSetupFeedback Indicates that the "Select Project" dialog is open.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyEnterStandbyTimeoutSetupFeedback Indicates that the "Standby Timeout" dialog is open.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyExitIpTableSetupFeedback Indicates that the "IP Table Setup" dialog is closed.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyExitNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is closed.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyExitNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is closed.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyExitSelectProjectSetupFeedback Indicates that the "Select Project" dialog is closed. ///
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyExitStandbyTimeoutSetupFeedback Indicates that the "Standby Timeout" dialog is closed.
(Inherited from TouchpanelSystem2ReservedSigs)
Public propertyHdmiOutputHdcpErrorStatusFeedback Reports the HDCP error status as follows: 0d = No Error 1d = Maximum HDCP keys exceeded 2d = Link not stable 3d = HDCP unauthenticated
Public propertyHdmiOutputHdcpStateFeedback Reports the status of HDCP authentication at the corresponding output, as follows: 0d = HDCP not required 1d = Downstream sink (i.e., the DM-TX-201C) not ready 2d = Downstream sink ready 3d = Downstream sink timeout 50d = Unauthenticated 51d = Unauthenticated (maximum HDCP keys exceeded) 52d = Unauthenticated (maximum HDCP device connection levels exceeded) 53d = Authenticated 54d = No downstream sink
Public propertyHidControlFeedback The address for keyboard/mouse data. The output should be connected to the corresponding HID input of the target interface. The target interface can include V-Panels (via the VPG Glass extender) or any interface that supports HID control commands.
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also