Click or drag to resize

Dmps3OutputEqualizer Properties

The CrestronControlSystemDmps3OutputEqualizer type exposes the following members.

Properties
 NameDescription
Public propertyBass Adjusts the bass settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB.
Public propertyBassDown Decrease the bass level of the specified output.
Public propertyBassFeedback Returns the current bass settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB.

The DMOutputChange event will trigger with BassFeedbackEventId.

Public propertyBassUp Increase the bass level of the specified output.
Public propertyEqualizerType The type of equalizer available.
(Inherited from OutputEqualizerBase)
Public propertyGeqGain125Hz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 125Hz frequency band.
Public propertyGeqGain125HzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 125Hz frequency band.

The DMOutputChange event will trigger with GeqGain125HzFeedbackEventId.

Public propertyGeqGain16KHz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 16KHz frequency band.
Public propertyGeqGain16KHzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 16KHz frequency band.

The DMOutputChange event will trigger with GeqGain16KHzFeedbackEventId.

Public propertyGeqGain1KHz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 1KHz frequency band.
Public propertyGeqGain1KHzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 1KHz frequency band.

The DMOutputChange event will trigger with GeqGain1KHzFeedbackEventId.

Public propertyGeqGain250Hz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 250Hz frequency band.
Public propertyGeqGain250HzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 250Hz frequency band.

The DMOutputChange event will trigger with GeqGain250HzFeedbackEventId.

Public propertyGeqGain2KHz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 2KHz frequency band.
Public propertyGeqGain2KHzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 2KHz frequency band.

The DMOutputChange event will trigger with GeqGain2KHzFeedbackEventId.

Public propertyGeqGain315Hz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 31.5Hz frequency band.
Public propertyGeqGain315HzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 31.5Hz frequency band.

The DMOutputChange event will trigger with GeqGain315HzFeedbackEventId.

Public propertyGeqGain4KHz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 4KHz frequency band.
Public propertyGeqGain4KHzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 4KHz frequency band.

The DMOutputChange event will trigger with GeqGain4KHzFeedbackEventId.

Public propertyGeqGain500Hz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 500Hz frequency band.
Public propertyGeqGain500HzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 500Hz frequency band.

The DMOutputChange event will trigger with GeqGain500HzFeedbackEventId.

Public propertyGeqGain63Hz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 63Hz frequency band.
Public propertyGeqGain63HzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 63Hz frequency band.

The DMOutputChange event will trigger with GeqGain63HzFeedbackEventId.

Public propertyGeqGain8KHz Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 8KHz frequency band.
Public propertyGeqGain8KHzFeedback Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 8KHz frequency band.

The DMOutputChange event will trigger with GeqGain8KHzFeedbackEventId.

Public propertyLimiterAttack Sets the attack time, which is the time in milliseconds that it takes the limiter to start clipping the signal level after the threshold has been exceeded. Valid values range from 1 (0.1ms) to 3000 (300ms).
Public propertyLimiterAttackFeedback Retrieves the attack time, which is the time in milliseconds that it takes the limiter to start clipping the signal level after the threshold has been exceeded. Valid values range from 1 (0.1ms) to 3000 (300ms).

The DMOutputChange event will trigger with LimiterAttackFeedbackEventId.

Public propertyLimiterDisableFeedback Indicates that limiting is disabled.
Public propertyLimiterEnableFeedback Indicates that limiting is enabled.
Public propertyLimiterHold Sets the limiter dynamics hold time, in milliseconds. Valid values range from 1 (1ms)to 200 (200ms).
Public propertyLimiterHoldFeedback Retrieves the limiter dynamics hold time, in milliseconds. Valid values range from 1 (1ms)to 200 (200ms).

The DMOutputChange event will trigger with LimiterHoldFeedbackEventId.

Public propertyLimiterRatio Sets the limiter ratio, which controls the amount of gain reduction to apply when the mic signal level exceeds the threshold. Valid values range from 1 (1:1) to 10 (10:1).
Public propertyLimiterRatioFeedback Retrieves the limiter ratio, which controls the amount of gain reduction to apply when the mic signal level exceeds the threshold. Valid values range from 1 (1:1) to 10 (10:1).

The DMOutputChange event will trigger with LimiterRatioFeedbackEventId.

Public propertyLimiterRelease Sets the release time, which is the time over which the limiter will stop clipping after the signal crosses under the threshold. Valid values range from 1 (1ms) to 1000 (1000ms)
Public propertyLimiterReleaseFeedback Retrieves the release time, which is the time over which the limiter will stop clipping after the signal crosses under the threshold. Valid values range from 1 (1ms) to 1000 (1000ms)

The DMOutputChange event will trigger with LimiterReleaseFeedbackEventId.

Public propertyLimiterSoftKneeOffFeedback Indicates that soft knee limiting is disabled. When soft knee limiting is enabled, this signifies that limiting will be applied gradually, depending on how far the signal is from the threshold. The slower onset can make the limiting less noticeable, especially when using high compression ratios. When soft knee limiting is disabled, this will apply normal (hard knee) limiting. This signifies that as soon as the signal exceeds the threshold, it is clipped immediately to the threshold.
Public propertyLimiterSoftKneeOnFeedback Indicates that soft knee limiting is enabled. When soft knee limiting is enabled, this signifies that limiting will be applied gradually, depending on how far the signal is from the threshold. The slower onset can make the limiting less noticeable, especially when using high compression ratios. When soft knee limiting is disabled, this will apply normal (hard knee) limiting. This signifies that as soon as the signal exceeds the threshold, it is clipped immediately to the threshold.
Public propertyLimiterThreshold Sets the limiting threshold. Valid values range from -800 (-80dB) to 0 (0dB) Once the signal exceeds the threshold, the limiter will clip the level to the threshold value. In this way, the output signal level will never exceed the threshold.
Public propertyLimiterThresholdFeedback Retrieves the limiting threshold. Valid values range from -800 (-80dB) to 0 (0dB) Once the signal exceeds the threshold, the limiter will clip the level to the threshold value. In this way, the output signal level will never exceed the threshold.

The DMOutputChange event will trigger with LimiterThresholdFeedbackEventId.

Public propertyParent The parent that a given object was added to.
(Inherited from OutputEqualizerBase)
Public propertyPeqFilter1Bandwidth Sets the bandwidth for filter 1. Valid values range from 20 to 3500.
Public propertyPeqFilter1BandwidthFeedback Reports the bandwidth for filter 1. Valid values range from 20 to 3500.

The DMOutputChange event will trigger with PeqFilter1BandwidthFeedbackEventId.

Public propertyPeqFilter1Frequency Sets the frequency for filter 1. Valid values range from 10 (10Hz) to 22000 (22kHz).
Public propertyPeqFilter1FrequencyFeedback Reports the frequency for filter 1. Valid values range from 10 (10Hz) to 22000 (22kHz).

The DMOutputChange event will trigger with PeqFilter1FrequencyFeedbackEventId.

Public propertyPeqFilter1Gain Sets the gain for the filter 1. Valid values range from -360 (-36dB) to 240 (24dB).
Public propertyPeqFilter1GainFeedback Reports the gain for the filter 1. Valid values range from -360 (-36dB) to 240 (24dB).

The DMOutputChange event will trigger with PeqFilter1GainFeedbackEventId.

Public propertyPeqFilter1Type Selects the parametric filter type for Filter 1.
Public propertyPeqFilter1TypeFeedback Reports the parametric filter type for Filter 1.

The DMOutputChange event will trigger with PeqFilter1TypeFeedbackEventId.

Public propertyPeqFilter2Bandwidth Sets the bandwidth for filter 2. Valid values range from 20 to 3500.
Public propertyPeqFilter2BandwidthFeedback Reports the bandwidth for Filter 2. Valid values range from 20 to 3500.

The DMOutputChange event will trigger with PeqFilter2BandwidthFeedbackEventId.

Public propertyPeqFilter2Frequency Sets the frequency for filter 2. Valid values range from 10 (10Hz) to 22000 (22kHz).
Public propertyPeqFilter2FrequencyFeedback Reports the frequency for Filter 2. Valid values range from 10 (10Hz) to 22000 (22kHz).

The DMOutputChange event will trigger with PeqFilter2FrequencyFeedbackEventId.

Public propertyPeqFilter2Gain Sets the gain for the filter 2. Valid values range from -360 (-36dB) to 240 (24dB).
Public propertyPeqFilter2GainFeedback Reports the gain for the Filter 2. Valid values range from -360 (-36dB) to 240 (24dB).

The DMOutputChange event will trigger with PeqFilter2GainFeedbackEventId.

Public propertyPeqFilter2Type Selects the parametric filter type for Filter 2.
Public propertyPeqFilter2TypeFeedback Reports the parametric filter type for Filter 2.

The DMOutputChange event will trigger with PeqFilter2TypeFeedbackEventId.

Public propertyPeqFilter3Bandwidth Sets the bandwidth for filter 3. Valid values range from 20 to 3500.
Public propertyPeqFilter3BandwidthFeedback Reports the bandwidth for Filter 3. Valid values range from 20 to 3500.

The DMOutputChange event will trigger with PeqFilter3BandwidthFeedbackEventId.

Public propertyPeqFilter3Frequency Sets the frequency for filter 3. Valid values range from 10 (10Hz) to 22000 (22kHz).
Public propertyPeqFilter3FrequencyFeedback Reports the frequency for Filter 3. Valid values range from 10 (10Hz) to 22000 (22kHz).

The DMOutputChange event will trigger with PeqFilter3FrequencyFeedbackEventId.

Public propertyPeqFilter3Gain Sets the gain for the filter 3. Valid values range from -360 (-36dB) to 240 (24dB).
Public propertyPeqFilter3GainFeedback Reports the gain for the Filter 3. Valid values range from -360 (-36dB) to 240 (24dB).

The DMOutputChange event will trigger with PeqFilter3GainFeedbackEventId.

Public propertyPeqFilter3Type Selects the parametric filter type for Filter 3.
Public propertyPeqFilter3TypeFeedback Reports the parametric filter type for Filter 3.

The DMOutputChange event will trigger with PeqFilter3TypeFeedbackEventId.

Public propertyPeqFilter4Bandwidth Sets the bandwidth for Filter 4. Valid values range from 20 to 3500.
Public propertyPeqFilter4BandwidthFeedback Reports the bandwidth for Filter 4. Valid values range from 20 to 3500.

The DMOutputChange event will trigger with PeqFilter4BandwidthFeedbackEventId.

Public propertyPeqFilter4Frequency Sets the frequency for Filter 4. Valid values range from 10 (10Hz) to 22000 (22kHz).
Public propertyPeqFilter4FrequencyFeedback Reports the frequency for Filter 4. Valid values range from 10 (10Hz) to 22000 (22kHz).

The DMOutputChange event will trigger with PeqFilter4FrequencyFeedbackEventId.

Public propertyPeqFilter4Gain Sets the gain for the Filter 4. Valid values range from -360 (-36dB) to 240 (24dB).
Public propertyPeqFilter4GainFeedback Reports the gain for the Filter 4. Valid values range from -360 (-36dB) to 240 (24dB).

The DMOutputChange event will trigger with PeqFilter4GainFeedbackEventId.

Public propertyPeqFilter4Type Selects the parametric filter type for Filter 4.
Public propertyPeqFilter4TypeFeedback Reports the parametric filter type for Filter 4.

The DMOutputChange event will trigger with PeqFilter4TypeFeedbackEventId.

Public propertyPresetNumber Sets the preset number to recall/save for SavePreset or RecallPreset calls.
Public propertyPresetReadyPulseFeedback When true, this indicates that the EQ preset has finished being recalled.

The DMOutputChange event will trigger with EqPresetReadyPulseFeedbackEventId.

Public propertyRecallingPresetFeedback When true, indicates that a preset EQ is in the process of being recalled.

The DMOutputChange event will trigger with RecallingEqPresetFeedbackEventId.

Public propertyTreble Adjusts the treble settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB.
Public propertyTrebleDown Decrease the treble level of the specified output.
Public propertyTrebleFeedback Returns the current treble settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB.

The DMOutputChange event will trigger with TrebleFeedbackEventId.

Public propertyTrebleUp Increase the treble level of the specified output.
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from OutputEqualizerBase)
Top
See Also