Dmps |
The Dmps3PotsDialer type exposes the following members.
| Name | Description | |
|---|---|---|
| BusyFeedback |
Indicates that the line being called is busy.
The DialerChange event is triggered with the BusyFeedbackEventId (Inherited from Dmps3Dialer) | |
| CallActiveFeedback |
Indicates that the outgoing call has connected and is active.
The DialerChange event is triggered with the CallActiveFeedbackEventId (Inherited from Dmps3Dialer) | |
| CallTerminatedFeedback |
Indicates that a call has been terminated for any reason.
The DialerChange event is triggered with the CallTerminatedFeedbackEventId (Inherited from Dmps3Dialer) | |
| CallWaitingIncomingCallerInformationFeedback | Indicates the number of an incoming call that is waiting. The DialerChange event is triggered with the CallWaitingIncomingCallerInformationFeedbackEventId | |
| CallWaitingToneFeedback | Indicates if the call waiting signal has been received. The DialerChange event is triggered with the CallWaitingToneFeedbackEventId | |
| ConnectedFeedback |
Indicates that this dialer has a valid POTS or SIP Connection.
The DialerChange event is triggered with the ConnectedFeedbackEventId (Inherited from Dmps3Dialer) | |
| DialingFeedback |
Indicates that the dialer is currently dialing or connecting.
(Inherited from Dmps3Dialer) | |
| DialString |
The phone number, SIP extension, group page, or URI to dial.
(Inherited from Dmps3Dialer) | |
| DialToneFeedback | Indicates if a dial tone is detected. The DialerChange event is triggered with the DialToneFeedbackEventId | |
| Digit0 | Property to dial digit "0". The method Dial0 can also be used which will pulse the digit for 200ms | |
| Digit1 | Property to dial digit "1". The method Dial1 can also be used which will pulse the digit for 200ms | |
| Digit2 | Property to dial digit "2". The method Dial2 can also be used which will pulse the digit for 200ms | |
| Digit3 | Property to dial digit "3". The method Dial3 can also be used which will pulse the digit for 200ms | |
| Digit4 | Property to dial digit "4". The method Dial4 can also be used which will pulse the digit for 200ms | |
| Digit5 | Property to dial digit "5". The method Dial5 can also be used which will pulse the digit for 200ms | |
| Digit6 | Property to dial digit "6". The method Dial6 can also be used which will pulse the digit for 200ms | |
| Digit7 | Property to dial digit "7". The method Dial7 can also be used which will pulse the digit for 200ms | |
| Digit8 | Property to dial digit "8". The method Dial8 can also be used which will pulse the digit for 200ms | |
| Digit9 | Property to dial digit "9". The method Dial9 can also be used which will pulse the digit for 200ms | |
| DigitAsterisk | Property to dial digit "*". The method DialAsterisk can also be used which will pulse the digit for 200ms | |
| DigitPound | Property to dial digit "#". The method DialPound can also be used which will pulse the digit for 200ms | |
| DoNotDisturbFeedback |
Report the current do not disturb state of the dialer.
(Inherited from Dmps3Dialer) | |
| IncomingCallDetectedFeedback |
Indicates if there is an incoming call.
The DialerChange event is triggered with the IncomingCallDetectedFeedbackEventId (Inherited from Dmps3Dialer) | |
| IncomingCallerInformationFeedback |
Indicates information about the current incoming call.
The DialerChange event is triggered with the IncomingCallerInformationFeedbackEventId (Inherited from Dmps3Dialer) | |
| IncomingCallFeedback | Obsolete. Indicates information about the current incoming call. The DialerChange event is triggered with the IncomingCallerInformationFeedbackEventId (Inherited from Dmps3Dialer) | |
| IncomingFeedback | Obsolete. Indicates if there is an incoming call. The DialerChange event is triggered with the IncomingCallDetectedFeedbackEventId (Inherited from Dmps3Dialer) | |
| Owner |
Owner of this object. On the Dmps3 systems, this is set to the CardDmps3DialerOutput.
(Inherited from Dmps3Dialer) | |
| RingbackFeedback |
Indicates that the outgoing call is ringing.
The DialerChange event is triggered with the RingbackFeedbackEventId (Inherited from Dmps3Dialer) | |
| RingingFeedback |
Indicates that an incoming call is waiting to be answered or declined.
The DialerChange event is triggered with the RingingFeedbackEventId (Inherited from Dmps3Dialer) | |
| Type |
Indicates the eDialerType type of dialer this object represents.
(Inherited from Dmps3Dialer) |