Click or drag to resize

TswX60UsbLedAccessoryControlReservedSigs Properties

The TswX60UsbLedAccessoryControlReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyBlueLedBlinkTime Property to set the Blue LED Blink rate. 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.
Public propertyBlueLedBlinkTimeFeedback Property to report the Blue LED Blink rate. 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.

The DeviceExtenderSigChange event will trigger with UShortChange and BlueLedBlinkTimeFeedback.

Public propertyBlueLedBrightness Property to set the Blue LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyBlueLedBrightnessFeedback Property to report the current Blue LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and BlueLedBrightnessFeedback.

Public propertyBlueLedControl Property to enable the Blue LED. true = enable Blue LED; false = disable Blue LED
Public propertyBlueLedControlFeedback Property to indicate that the Blue LED is on.

The DeviceExtenderSigChange event will trigger with BoolChange and BlueLedControlFeedback.

Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyGreenLedBlinkTime Property to set the Green LED Blink rate. 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.
Public propertyGreenLedBlinkTimeFeedback Property to report the Green LED Blink rate. 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.

The DeviceExtenderSigChange event will trigger with UShortChange and GreenLedBlinkTimeFeedback.

Public propertyGreenLedBrightness Property to set the Green LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyGreenLedBrightnessFeedback Property to report the current Green LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and GreenLedBrightnessFeedback.

Public propertyGreenLedControl Property to enable the Green LED. true = enable Green LED; false = disable Green LED
Public propertyGreenLedControlFeedback Property to indicate that the Green LED is on.

The DeviceExtenderSigChange event will trigger with BoolChange and GreenLedControlFeedback.

Public propertyLedAccessoryConnectedFeedback Property to report that an LED accessory is connected to the USB port. true = Accessory connected; false = Accessory not connected.

The DeviceExtenderSigChange event will trigger with BoolChange and LedAccessoryConnectedFeedback.

Public propertyRedLedBlinkTime Property to set the Red LED Blink rate. Valid values include: 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.
Public propertyRedLedBlinkTimeFeedback Property to report the Red LED Blink rate. 0 = Blinking disabled 1 - 1000 = Blink rate in 100ms increments.

The DeviceExtenderSigChange event will trigger with UShortChange and RedLedBlinkTimeFeedback.

Public propertyRedLedBrightness Property to set the Red LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyRedLedBrightnessFeedback Property to report the current Red LED Brightness value. Valid values range from 0 to 100% in 10% increments. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and RedLedBrightnessFeedback.

Public propertyRedLedControl Property to enable the Red LED. true = enable Red LED; false = disable Red LED
Public propertyRedLedControlFeedback Property to indicate that the Red LED is on.

The DeviceExtenderSigChange event will trigger with BoolChange and RedLedControlFeedback.

Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also