Click or drag to resize

Tpmc12QmAudioReservedSigs Class

QM Audio reserved sigs for TPMC-12
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpProDeviceExtender
    Crestron.SimplSharpPro.UITpmc12QmAudioReservedSigs

Namespace: Crestron.SimplSharpPro.UI
Assembly: Crestron.SimplSharpPro.DeviceSupport (in Crestron.SimplSharpPro.DeviceSupport.dll) Version: 2.21.121
Syntax
C#
public sealed class Tpmc12QmAudioReservedSigs : DeviceExtender

The Tpmc12QmAudioReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyQMAudioAutoCompensationDisable Disables automatic audio compensation at QM IN for as long as the input is high. Auto-compensation allows the panel to recall the input source compensation and microphone EQ settings from the QM transmitter. When disabled, no audio settings are recalled from the transmitter.
Public propertyQMAudioAutoCompensationDisableFeedback Indicates that automatic audio compensation is disabled.
Public propertyQMAudioAutoCompensationEnable Enables automatic audio compensation at QM IN for as long as the input is high. Auto-compensation allows the panel to recall the input source compensation and microphone EQ settings from the QM transmitter. When disabled, no audio settings are recalled from the transmitter.
Public propertyQMAudioAutoCompensationEnableFeedback Indicates that automatic audio compensation is enabled.
Public propertyQMAudioMic1OffFeedback Indicates that the Mic1 channels of QM IN are turned off. The output remains high for as long as mic audio is off.
Public propertyQMAudioMic1OnFeedback Indicates that the Mic1 channels of QM IN are turned on. The output remains high for as long as mic audio is on.
Public propertyQMAudioMic1VolDn Lowers the audio mic1 volume level by 1% with each rising edge of the input. The volume is adjustable from 0% (-80dB) to 100% (+20dB). A volume of 0% mutes the speech audio. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyQMAudioMic1Volume Sets the speech volume level for the Mic1 channels of QM IN.
Public propertyQMAudioMic1VolumeFeedback Analog Output QMAudioMic1VolumeFeedback
Public propertyQMAudioMic1VolUp Raises the audio mic1 volume level by 1% with each rising edge of the input. The volume is adjustable from 0% (-80dB) to 100% (+20dB). The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the volume reaches 100%.
Public propertyQMAudioMic2OffFeedback Indicates that the Mic2 channels of QM IN are turned off. The output remains high for as long as mic audio is off.
Public propertyQMAudioMic2OnFeedback Indicates that the Mic2 channels of QM IN are turned on. The output remains high for as long as mic audio is on.
Public propertyQMAudioMic2VolDn Lowers the audio mic2 volume level by 1% with each rising edge of the input. The volume is adjustable from 0% (-80dB) to 100% (+20dB). A volume of 0% mutes the speech audio. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyQMAudioMic2Volume Sets the speech volume level for the Mic2 channels of QM IN.
Public propertyQMAudioMic2VolumeFeedback Analog Output QMAudioMic2VolumeFeedback
Public propertyQMAudioMic2VolUp Raises the Audio Mic2 microphone volume level by 1% with each rising edge of the input. The volume is adjustable from 0% (-80dB) to 100% (+20dB). The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the volume reaches 100%.
Public propertyQMAudioProgramOffFeedback Indicates that the program audio at QM IN is turned off. The output remains high for as long as program audio is off.
Public propertyQMAudioProgramOnFeedback Indicates that the program audio at QM IN is turned on. The output remains high for as long as program audio is on.
Public propertyQMAudioProgramVolDn Lowers the program volume level by 1% with each rising edge of the input. The volume is applied equally to Left and Right channels and is adjustable from 0% (-80dB) to 100% (+20dB). The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds the volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyQMAudioProgramVolume Sets the volume level for the left and right program channels of QM IN.
Public propertyQMAudioProgramVolumeFeedback Reports the program volume level.
Public propertyQMAudioProgramVolUp Raises the program volume level by 1% with each rising edge of the input. The volume is applied equally to the Left and Right channels and is adjustable from 0% (-80dB) to 100% (+20dB). The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the volume reaches 100%.
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodInitializeJoins Initialize the Joins
(Overrides DeviceExtenderInitializeJoins)
Protected methodMapAnalogInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapAnalogOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Public methodQMAudioMic1Off Turns off the Mic1 channels of QM IN on the rising edge of the input.
Public methodQMAudioMic1On Turns on the Mic1 channels of QM IN on the rising edge of the input.
Public methodQMAudioMic2Off Turns off the Mic2 channels of QM IN on the rising edge of the input.
Public methodQMAudioMic2On Turns on the Mic2 channels of QM IN on the rising edge of the input.
Public methodQMAudioProgramOff Turns off the program audio L/R channels of QM IN on the rising edge of the input.
Public methodQMAudioProgramOn Turns on the program audio L/R channels of QM IN on the rising edge of the input.
Protected methodSendCueEventDataForDeviceExtender Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodUse Set the extender as usable on the device. Call this method before registration of the device.
(Inherited from DeviceExtender)
Top
Events
 NameDescription
Public eventDeviceExtenderSigChange Event to receive sig information intended for a device extender. When processing this event, it will hold off other sigs from being received from the device. If one desires to continue processing the data and receive more information, launch a new thread and allow this event to exit.
(Inherited from DeviceExtender)
Top
Fields
 NameDescription
Protected field_InUse Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also