Tpmc |
public class Tpmc8BaseWiFiReservedSigs : DeviceExtender
The Tpmc8BaseWiFiReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| ACLineStatusFeedback | Indicates the status of the AC power line. The output remains true for as long as AC power is on. | |
| BatteryChargingFeedback | Indicates that the internal Li-Ion battery is charging. The output remains true for as long as the battery is charging. | |
| BatteryDiscreteLevelFeedback | Reports the internal battery level from 0 (no charge) to 9 (full charge). | |
| BatteryLevelFeedback | Reports the internal battery level from 0 (no charge) to 100 (full charge). | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| DockingStationBSSIDAddressFeedback |
The BSSID of the docking station (desktop cradle or wallmount docking station).
The BSSID is the name given to the WAP (wireless access point) MAC address. The BSSID is reported in the format: XX-XX-XX-XX-XX-XX, where XX is a hexadecimal value ranging from 00 to FF (all caps). | |
| DockingStationConnectionStatusFeedback | Indicates that the docking station Ethernet link status is online, whether the docking station is the desktop cradle or the wallmount docking station. | |
| DockingStationDockedStatusFeedback | Indicates that the panel is currently docked in a docking station, whether the docking station is the desktop cradle or the wallmount docking station. | |
| DockingStationIPAddressFeedback |
The IP address of the docking station (desktop cradle or wallmount docking station).
The IP address is reported in dotted decimal format: X.X.X.X, where X is a decimal value ranging from 0 to 255, with no leading zeros. | |
| DockingStationMACAddressFeedback |
The MAC address of the docking station (desktop cradle or wallmount docking station).
The MAC address is reported in the format: XX-XX-XX-XX-XX-XX, where XX is a hexadecimal value ranging from 00 to FF (all caps). | |
| InternalWiFiDiscreteSignalStrengthFeedback | Reports the WiFi signal strength from 0 (no signal) to 9 (maximum signal). | |
| InternalWiFiIPAddressFeedback |
The IP Address of the touchpanel.
The IP address is reported in dotted decimal format: X.X.X.X, where X is a decimal value ranging from 0 to 255, with no leading zeros. | |
| InternalWiFiMACAddressFeedback |
The MAC address of the touchpanel.
The MAC address is reported in the format: XX-XX-XX-XX-XX-XX, where XX is a hexadecimal value ranging from 00 to FF (all caps). | |
| InternalWiFiSignalStrengthFeedback | Reports the WiFi signal strength from 0 (no signal) to 100 (maximum signal). | |
| InternalWiFiSSIDFeedback |
The SSID of the touchpanel. The SSID is a string of ASCII characters.
The SSID is the pre-defined network name. | |
| InternalWiFiWAPConnectionStatusFeedback | Indicates a valid connection to a WAP (wireless access point). | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) | |
| WallmountDockingStationCarrierClosedStatusFeedback | Indicates the status of the carrier, which holds the panel. When the carrier is open, the panel can be removed from the docking station. When closed, the panel is locked into the docking station. | |
| WallmountDockingStationDisableReleasePopupIcon |
Disables the pop-up icon that is usually displayed whenever the panel is docked in the wallmount docking station, for as long as the input is true. The icon is a button that the user can press to release the panel.
When the input is false, the icon is displayed when the panel is docked. | |
| WallmountDockingStationDisableReleasePopupIconFeedback | Indicates that the pop-up icon for releasing the panel from the wallmount docking station is disabled. The output remains true for as long as the pop-up icon is disabled. | |
| WallmountDockingStationDockedStatusFeedback | Indicates that the panel is currently docked in the wallmount docking station. | |
| WallmountDockingStationPanelManuallyReleasedFeedback |
Pulses to indicate that the panel has been manually released from the docking station.
(To manually release the panel, the user sticks a flat key on the top part of the docking station that releases the panel from the docking station.) | |
| WallmountDockingStationPlainTextPasscodeDialog | Displays the passcode that the user enters into the Wallmount Passcode Release dialog in plain text rather than asterisks, for as long as the input is true. When the input is false, the passcode is displayed in all asterisks. | |
| WallmountDockingStationPlainTextPasscodeDialogFeedback | Indicates that plain text passcode display is turned on. The output remains true for as long as the panel is in this mode. | |
| WallmountDockingStationReleasePasscode |
Pass code for removing the panel from the docking station when the panel is in secure mode (WallmountDockingStationSecureModeFeedback = true).
The user can enter this pass code or any of the five passcodes that can be set in the Wallmount Docking Station Setup dialog. The string can be made up of any ASCII characters (251 characters max). | |
| WallmountDockingStationSecureMode |
Activates secure mode for as long as the input is true.
When in secure mode, this displays the "Wallmount Passcode Release" dialog whenever the user tries to release the panel from the docking station. The user would then need to enter any of the five passcodes set in the "Wallmount Docking Station Setup" dialog, or the passcode set by WallmountDockingStationReleasePasscode. When the input is false, this puts the panel into standard mode. In standard mode the panel can be removed by anyone. | |
| WallmountDockingStationSecureModeFeedback | Indicates that the panel is in secure mode. The output remains true for as long as the panel is in secure mode. |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InitializeJoins |
Method to initialize the sigs of the 8Base WiFi extender
(Overrides DeviceExtenderInitializeJoins) | |
| MapAnalogInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapAnalogOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| SendCueEventDataForDeviceExtender |
Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) | |
| Use |
Set the extender as usable on the device.
Call this method before registration of the device.
(Inherited from DeviceExtender) | |
| WallmountDockingStationReleasePanel | Notify the wallmount docking station to release (unlock) the panel. |
| Name | Description | |
|---|---|---|
| DeviceExtenderSigChange |
Event to receive sig information intended for a device extender.
When processing this event, it will hold off other sigs from being received from the device.
If one desires to continue processing the data and receive more information, launch a new thread
and allow this event to exit.
(Inherited from DeviceExtender) |
| Name | Description | |
|---|---|---|
| _InUse |
Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender) |