Click or drag to resize

DmTxRx100Str Properties

The DmTxRx100Str type exposes the following members.

Properties
 NameDescription
Public propertyComPorts Collection of serial COM ports on the device.
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyContentLanLinkStatusFeedback Indicates if an Ethernet link is detected at the content LAN input of the DmTxRx100Str. 'true = Ethernet link detected; 'false = Ethernet link not detected. ///

The BaseEvent event will trigger with ContentLanLinkStatusEventId.

Public propertyControl The Common Stream control.

This property will trigger BaseEvent event with DMInputEventIds.

Public propertyCurrentDefaultRouterFeedback Reports the default router address of the encoder. The default router address is given in dot decimal notation.

The BaseEvent event will trigger with CurrentDefaultRouterEventId.

Public propertyCurrentDomainNameFeedback Reports the current domain name of the encoder.

The BaseEvent event will trigger with CurrentDomainNameEventId.

Public propertyCurrentDomainNameServer Property to set the current DNS Server that is to be used by the encoder. Maximum length is 200.
Public propertyCurrentDomainNameServerFeedback Reports the current DNS server that is used by the encoder.

The BaseEvent event will trigger with DomainNameServerEventId.

Public propertyCurrentIpAddressFeedback Reports the current IP address of the encoder. The IP address is given in dot decimal notation.

The BaseEvent event will trigger with CurrentIpAddressEventId.

Public propertyCurrentIpv6AddressFeedback Property to return the current IPv6 Address.

The BaseEvent event will trigger with CurrentIpv6AddressEventId.

Public propertyCurrentSubnetMaskFeedback Reports the current subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The BaseEvent event will trigger with CurrentSubnetMaskEventId.

Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisableDhcpFeedback Indicates that DHCP (dynamic IP addressing) is disabled. 'true = DHCP Disabled; 'false' = DHCP Enabled

The BaseEvent event will trigger with DisableDhcpEventId.

Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableDhcpFeedback Indicates that DHCP (dynamic IP addressing) on the encoder is enabled. 'true = DHCP Enabled; 'false' = DHCP Disabled ///

The BaseEvent event will trigger with EnableDhcpEventId.

Public propertyHdmiIn HDMI Input present on this device

This property will trigger StreamChange with DMInputEventIds, AttributeChange with VideoAttributeEventIds, and CecChange with CecEventIds.

Public propertyHdmiOut HDMI output present on this device

This property will trigger StreamChange with DMOutputEventIds, AttributeChange with VideoAttributeEventIds, DeviceInformationChange with ConnectedDeviceEventIds and CecChange with CecEventIds.

Public propertyHostName Sets the hostname of the encoder. The hostname can consist of up to 63 characters with no spaces. Valid characters are 0 – 9, A – Z and hyphen. The hostname cannot begin with a hyphen or number.
Public propertyHostNameFeedback Reports the hostname of the encoder.

The BaseEvent event will trigger with HostNameEventId.

Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIROutputPorts Collection of IR output ports on the device.
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNtpServer Property to set the NTP Server. The maximum length is 200.
Public propertyNtpServerFeedback Property to return the NTP Server.

The BaseEvent event will trigger with NtpServerEventId.

Public propertyNumberOfComPorts Number of serial COM ports this device supports.
Public propertyNumberOfIROutputPorts Number of IR output ports this device supports.
Public propertyOsdDisableFeedback Property to indicate that the OSD is disabled.

The BaseEvent event will trigger with OsdDisableEventId.

Public propertyOsdEnableFeedback Property to indicate that the OSD is enabled.

The BaseEvent event will trigger with OsdEnableEventId.

Public propertyOsdLocation Property to set the OSD location.
Public propertyOsdLocationFeedback Property to report the current OSD location.

The BaseEvent event will trigger with OsdLocationEventId.

Public propertyOsdText Property to set the OSD Text. Maximum length is 200.
Remarks
Maximum length of the text is 200.
Public propertyOsdTextFeedback Property to return the current OSD Text.

The BaseEvent event will trigger with OsdTextEventId.

Public propertyOsdXPosition Property to set the OSD X Position. Valid range is 0-1920 in pixels.
Public propertyOsdXPositionFeedback Property to report the current OSD X Position.

The BaseEvent event will trigger with OsdXPositionEventId.

Public propertyOsdYPosition Property to set the OSD Y Position. Valid range is 0-1200.
Public propertyOsdYPositionFeedback Property to report the current OSD Y Position.

The BaseEvent event will trigger with OsdYPositionEventId.

Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRtpAudioPort Property to set the RTP Audio Port.
Public propertyRtpAudioPortFeedback Property to report the current RTP Audio Port.

The BaseEvent event will trigger with RtpAudioPortEventId.

Public propertyRtpVideoPort Property to set the RTP Video Port.
Public propertyRtpVideoPortFeedback Property to report the current RTP Video Port.

The BaseEvent event will trigger with RtpVideoPortEventId.

Public propertyRtspPort Property to set the RTSP Port.
Public propertyRtspPortFeedback Property to report the current RTSP Port.

The BaseEvent event will trigger with RtspPortEventId.

Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySourceReceive Source Receive present on this device

This property will trigger StreamChange with DMInputEventIds and AttributeChange with VideoAttributeEventIds.

Public propertySourceTransmit Source Transmit present on this device

This property will trigger StreamChange with DMOutputEventIds and AttributeChange with VideoAttributeEventIds.

Public propertyStaticDefaultRouter Sets the static default router address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticDefaultRouterFeedback Report the static default router address of the encoder. The default router address is given in dot decimal notation.

The BaseEvent event will trigger with StaticDefaultRouterEventId.

Public propertyStaticDomainName Sets the static domain name of the encoder. The domain name should be set according to the requirements of the network administrator. Note that the StaticDomainName will only be used when DHCP is disabled!
Public propertyStaticDomainNameFeedback Reports the static domain name of the encoder.

The BaseEvent event will trigger with StaticDomainNameEventId.

Public propertyStaticDomainNameServer Sets the static DNS (Domain Name Server) that the encoder will use. The string format is in dot decimal notation. Note that the StaticDomainNameServer will only be used when DHCP is disabled!
Public propertyStaticDomainNameServerFeedback Reports the static DNS server that is used by the encoder.

The BaseEvent event will trigger with StaticDomainNameServerEventId.

Public propertyStaticIpAddress Sets the static IP address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticIpAddressFeedback Report the static IP address of the encoder. The IP address is given in dot decimal notation.

The BaseEvent event will trigger with StaticIpAddressEventId.

Public propertyStaticIpv6Address Property to set the Static IPv6 Address. The maximum length is 200.
Public propertyStaticIpv6AddressFeedback Property to report the current Static IPv6 Address.

The BaseEvent event will trigger with StaticIpv6AddressEventId.

Public propertyStaticSubnetMask Sets the static subnet mask of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticSubnetMaskFeedback Report the static subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The BaseEvent event will trigger with StaticSubnetMaskEventId.

Public propertyStatisticsDisableFeedback Property to indicate that the Statistics is disabled.

The BaseEvent event will trigger with StatisticsDisableEventId.

Public propertyStatisticsEnableFeedback Property to indicate that the Statistics is enabled.

The BaseEvent event will trigger with StatisticsEnableEventId.

Public propertyStatisticsNumberOfAudioPacketsDroppedFeedback Property to report the Number of Audio Packets Dropped.

The BaseEvent event will trigger with StatisticsNumberOfAudioPacketsDroppedEventId.

Public propertyStatisticsNumberOfAudioPacketsReceivedFeedback Property to report the Number of Audio Packets Received.

The BaseEvent event will trigger with StatisticsNumberOfAudioPacketsReceivedEventId.

Public propertyStatisticsNumberOfVideoPacketsDroppedFeedback Property to report the Number of Video Packets Dropped.

The BaseEvent event will trigger with StatisticsNumberOfVideoPacketsDroppedEventId.

Public propertyStatisticsNumberOfVideoPacketsReceivedFeedback Property to report the Number of Video Packets Received.

The BaseEvent event will trigger with StatisticsNumberOfVideoPacketsReceivedEventId.

Public propertyTimesetMethod Property to set the Timeset Method.
Public propertyTimesetMethodFeedback Property to report the current Timeset Method.

The BaseEvent event will trigger with TimesetMethodEventId.

Public propertyTimeZone Property to set the current Time Zone.
Public propertyTimeZoneFeedback Property to report the current Time Zone.

The BaseEvent event will trigger with TimeZoneEventId.

Public propertyTsPort Property to set the TS Port.
Public propertyTsPortFeedback Property to report the current TS Port.

The BaseEvent event will trigger with TsPortEventId.

Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also