Click or drag to resize

Switching Properties

The Switching type exposes the following members.

Properties
 NameDescription
Public propertyGotoCustomDownHost Property to set the custom down host port.
Public propertyGotoCustomDownHostFeedback Property to indicate the custom down host port.

This property will trigger DMOutputChange event with GotoCustomDownHostFeedbackEventId.

This property is not supported on UsbSw200.
Public propertyGotoCustomLeftHost Property to set the custom left host port.
Public propertyGotoCustomLeftHostFeedback Property to indicate the custom left host port.

This property will trigger DMOutputChange event with GotoCustomLeftHostFeedbackEventId.

Public propertyGotoCustomNextHost Property to set the custom next host port.
Public propertyGotoCustomNextHostFeedback Property to indicate the custom next host port.

This property will trigger DMOutputChange event with GotoCustomNextHostFeedbackEventId.

Public propertyGotoCustomPreviousHost Property to set the custom previous host port.
Public propertyGotoCustomPreviousHostFeedback Property to indicate the custom previous host port.

This property will trigger DMOutputChange event with GotoCustomPreviousHostFeedbackEventId.

Public propertyGotoCustomRightHost Property to set the custom right host port.
Public propertyGotoCustomRightHostFeedback Property to indicate the custom right host port.

This property will trigger DMOutputChange event with GotoCustomRightHostFeedbackEventId.

Public propertyGotoCustomUpHost Property to set the custom up host port.
Public propertyGotoCustomUpHostFeedback Property to indicate the custom up host port to goto.

This property will trigger DMOutputChange event with GotoCustomUpHostFeedbackEventId.

This property is not supported on UsbSw200..
Public propertyGotoDownHost Property to select the host down. 0 = Custom 1 = Control + Down 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided. This property is not supported on UsbSw200
Public propertyGotoDownHostFeedback Property to select the host down. 0 = Custom 1 = Control + Down 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided

This property will trigger DMOutputChange event with GotoDownHostFeedbackEventId.

This property is not supported on UsbSw200.
Public propertyGotoLeftHost Property to select the left side host. 0 = Custom 1 = Control + Arrow Left 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided.
Public propertyGotoLeftHostFeedback Property to select the left side host. 0 = Custom 1 = Control + Arrow Left 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided.

This property will trigger DMOutputChange event with GotoLeftHostFeedbackEventId.

Public propertyGotoNextHost Property to select the next host. 0 = Custom 1 = Control + Tab 2 = Control + Enter 3 = Alt + Enter Note: Device port will be routed to host port based on the value provided.
Public propertyGotoNextHostFeedback Property to indicate the next host to goto. 0 = Custom 1 = Control + Tab 2 = Control + Enter 3 = Alt + Enter Note: Device port will be routed to host port based on the value provided.

This property will trigger DMOutputChange event with GotoNextHostFeedbackEventId.

Public propertyGotoPreviousHost Property to select the previous host. 0 = Custom 1 = Control + Shift +Tab 2 = Control + Shift + Enter 3 = Alt + Shift + Enter Note: Device port will be routed to host port based on the value provided.
Public propertyGotoPreviousHostFeedback Property to indicate the previous host to goto. 0 = Custom 1 = Control + Shift +Tab 2 = Control + Shift + Enter 3 = Alt + Shift + Enter Note: Device port will be routed to host port based on the value provided.

This property will trigger DMOutputChange event with GotoPreviousHostFeedbackEventId.

Public propertyGotoRightHost Property to select the right side host. 0 = Custom 1 = Control + Arrow Right 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided.
Public propertyGotoRightHostFeedback Property to select the right side host. 0 = Custom 1 = Control + Arrow Right 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided.

This property will trigger DMOutputChange event with GotoRightHostFeedbackEventId.

Public propertyGotoUpHost Propertyt to select the host upside. 0 = Custom 1 = Control + Up 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided. This property is not supported on UsbSw200
Public propertyGotoUpHostFeedback Propertyt to select the host upside. 0 = Custom 1 = Control + Up 2 = Control + Shift + Arrow 3 = Alt + Arrow 4 = Alt + Shift + Arrow Note: Device port will be routed to host port based on the value provided

This property will trigger DMOutputChange event with GotoUpHostFeedbackEventId.

This property is not supported on UsbSw200.
Public propertyHostDisplayConfgurationFeedback Property to select the host display configuration Indicates the type of configuration 1d => 4x1 2d => 2x2 3d => 3x1

This property will trigger DMOutputChange event with HostDisplayConfgurationFeedbackEventId.

Public propertyHostDisplayConfiguration Property to select the host display configuration.
Public propertyMouseSwitchDisabledFeedback Property to indicate if the switching using mouse pointer hovering is disabled.

This property will trigger DMInputChange event with MouseSwitchDisabledEventId.

Public propertyMouseSwitchEnabledFeedback Property to indicate if the switching using mouse pointer hovering is enabled.

This property will trigger DMInputChange event with MouseSwitchEnabledEventId.

Public propertyParent The parent that a given object was added to.
Public propertyUsbHotKeyDisabledFeedback Property to indicate, if the usb hot key is disabled or not.

This property will trigger DMInputChange event with UsbHotKeyDisabledEventId.

Public propertyUsbHotKeyEnabledFeedback Property to indicate, if the usb hot key is enabled or not.

This property will trigger DMInputChange event with UsbHotKeyEnabledEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Top
See Also