BACnet |
This class will trigger BACnetObjectChange event.
public sealed class BACnetRemoteAnalogValueObject : BACnetRemoteAnalogValueOutputObjectCommon
The BACnetRemoteAnalogValueObject type exposes the following members.
| Name | Description | |
|---|---|---|
| BACnetRemoteAnalogValueObject(UInt32) | Constructor to create new BACnetRemoteAnalogValueObject class object. | |
| BACnetRemoteAnalogValueObject(UInt32, Boolean, UInt32, eBACnetPriorityType, UInt32, Boolean, UInt32) | Constructor to create new BACnetRemoteAnalogValueObject class object. |
| Name | Description | |
|---|---|---|
| CovIncrementFeedback |
Property to report the minimum change in ValueFeedback that will trigger Change Of Value notification.
The BACnetObjectChange event will trigger with CovIncrementChangedEventId. (Inherited from BACnetRemoteAnalogInputObject) | |
| CovLifetime |
Parameter to specify the default Change of Value (COV) notification lifetime in minutes. Default value is 30 minutes.
(Inherited from BACnetRemoteCommonObject) | |
| Decimal |
Parameter that specifies the number of digits to the right of the decimal point for ValueFeedback or PresentValue.
Valid values are as follows:
0 (indicates present value is a whole number), 1, 2, 3.
(Inherited from BACnetRemoteAnalogInputObject) | |
| Disposed |
Property to indicate if the Device has been disposed.
(Inherited from BACnetObject) | |
| EventStateFeedback |
Property to indicate the event state associated with the object.
This property will trigger BACnetObjectChange event with EventStateFeedbackEventId. (Inherited from BACnetRemoteCommonObject) | |
| Id |
A 22-bit decimal number that serves as an unique address of the object within the BACnet device.
Valid range from 0 to 4194302.
(Inherited from BACnetObject) | |
| OutOfServiceFeedback |
Property to report whether the BACnet object is functioning as expected or not.
true means the object is out of service.
false means it is in service.
This property will trigger BACnetObjectChange event with OutOfServiceChangedEventId. (Inherited from BACnetRemoteCommonObject) | |
| Parent |
The parent that a given object was added to.
(Inherited from BACnetObject) | |
| PresentValue |
Property to report the Present Value information of the object.
This property will trigger BACnetObjectChange event with event ID PresentValueFeedbackEventId. (Inherited from BACnetRemoteAnalogInputObject) | |
| PresentValueChangedFeedback |
Property to report whether there has been any change in the ValueFeedback. Pulses when ValueFeedback value changes.
This property changes from false to true and again to false when PresentValue is changed.
This property will trigger BACnetObjectChange event with PresentValueChangedEventId. (Inherited from BACnetRemoteAnalogInputObject) | |
| Priority |
Parameter to specify the BACnet priority level at which the object will communicate.
There are 16 levels of priority, where level 1 denotes the highest priority and level 16 - the lowest.
(Inherited from BACnetRemoteCommonObject) | |
| PriorityForPresentValueFeedback |
Indicates the write priority of the present value recently received from the remote device.
This property value is updated either by calling PollForValue method or
by sending an RPM request for this object internally from the BACnet Stack to the Host Device.
This property is not supported on firmware with version less than "4.0003.00005" on VC4 platforms.
This property is not supported on firmware with version less than "2.8004.00001" on 4-Series platform.
This property is not supported on 3-Series platforms.
This property will trigger BACnetObjectChange event with PriorityForPresentValueFeedbackEventId. (Inherited from BACnetRemoteAnalogValueOutputObjectCommon) | |
| RelinquishDefault |
Property to set the Relinquish Default.
Reliquish Default is a BACnet Property that indicates the default Present Value and will be assigned to the Present Value property when all the Priority Array entries are NULL.
(Inherited from BACnetRemoteAnalogValueOutputObjectCommon) | |
| ScanRate |
Parameter to specify the default time interval (in seconds) for polling the device properties.
This parameter will be ignored if the user chooses to set the polling interval by using the VariableScanRate.
Default value = 30s.
(Inherited from BACnetRemoteCommonObject) | |
| Signed |
Parameter that indicates if ValueFeedback or PresentValue is signed or unsigned number.
true = signed number; false = unsigned number.
Default value is false.
(Inherited from BACnetRemoteAnalogInputObject) | |
| StatusFlagsFeedback |
Property to report the state of the four Boolean flags that indicate the general "health" of the remote object.
This property will trigger BACnetObjectChange event with StatusFlagsFeedbackEventId. (Inherited from BACnetRemoteCommonObject) | |
| SubscribeCov |
Parameter that indicates if the BACnet device subscribes to Change of Value (COV) notification.
Valid values as follows:
true = subscribes to COV notification; false = Does not subscribe COV notification
Default-value = true (subscribes to COV notification)
(Inherited from BACnetRemoteCommonObject) | |
| Type |
Type of the BACnet object.
(Inherited from BACnetObject) | |
| UnitsFeedback |
Property to report the correct engineering unit for ValueFeedback.
This property will trigger BACnetObjectChange event with UnitsFeedbackEventId. (Inherited from BACnetRemoteAnalogInputObject) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from BACnetObject) | |
| VariableScanRate |
When non-zero, will cause the BACnet stack to poll for the value periodically.
When set to zero will poll for value at the specified interval set by the ScanRate parameter.
(Inherited from BACnetRemoteCommonObject) | |
| WritePriority |
Write priority of this object.
(Inherited from BACnetRemoteAnalogValueOutputObjectCommon) |
| Name | Description | |
|---|---|---|
| Dispose |
Clean up of resources.
(Inherited from BACnetObject) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| PollForValue |
Method that causes the BACnet stack to request the current property value from the Remote Object when changed from false to true.
(Inherited from BACnetRemoteCommonObject) | |
| Relinquish |
Method to relinquish control to the next highest priority object in the priority array.
(Inherited from BACnetRemoteCommonObject) | |
| ToString |
String representation of the BACnetObject.
(Inherited from BACnetObject) |
| Name | Description | |
|---|---|---|
| BACnetObjectChange |
Event triggered when the BACnetObject reports information to the Control System.
(Inherited from BACnetObject) |