Click or drag to resize

AirMediaInputSlot Properties

The AirMediaInputSlot type exposes the following members.

Properties
 NameDescription
Public propertyAdapterIndex Property to select which ethernet adapter to display AirMedia on(0 = Eth0, 1 = Eth1). This is only valid on units which have multiple ethernet adapters. This property is not supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".
Public propertyAdapterIndexFeedback Returns the ethernet adapter index on which to display AirMedia (0 = Eth0, 1 = Eth1) This property will always return 0 on units with a single ethernet adapter. This property is not supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

The AirMediaChange event will trigger with the AirMediaAdapterIndexEventId event Id.

Public propertyAdministration Property to access the AirMedia administration properties.

This property will trigger AirMediaChange with event IDs defined in AirMediaInputSlot.

Public propertyAssignLanDisabledFeedback Property that indicates if AirMedia is disabled for LAN access when 'true'.

The AirMediaChange event will trigger with the AssignLanDisabledFeedbackEventId event Id.

Public propertyAssignLanEnabledFeedback Property that indicates if AirMedia is available for LAN access when 'true'.

The AirMediaChange event will trigger with the AssignLanEnabledFeedbackEventId event Id.

Public propertyAssignWlanDisabledFeedback Property that indicates if AirMedia is disabled for WLAN access when 'true'.

The AirMediaChange event will trigger with the AssignWlanDisabledFeedbackEventId event Id.

Public propertyAssignWlanEnabledFeedback Property that indicates if AirMedia is available for WLAN access when 'true'.

The AirMediaChange event will trigger with the AssignWlanEnabledFeedbackEventId event Id.

Public propertyCanvasDisabledFeedback Property that indicates if AirMedia Canvas is disabled when 'true'.

The AirMediaChange event will trigger with the CanvasDisabledFeedbackEventId event Id.

Public propertyCanvasEnabledFeedback Property that indicates if AirMedia Canvas is enabled when 'true'.

The AirMediaChange event will trigger with the CanvasEnabledFeedbackEventId event Id.

Public propertyCanvasOptions Property to set what source types can work within AirMedia Canvas.
Public propertyCanvasOptionsFeedback Property that indicates the currently selected Canvas option.

The AirMediaChange event will trigger with the CanvasOptionsFeedbackEventId event Id.

Public propertyConnectionAddressFeedback Returns the air media connection address.

The AirMediaChange event will trigger with the AirMediaConnectionAddressFeedbackEventId event Id.

Public propertyControl Property to access the AirMedia service, general layout properties.

This property will trigger AirMediaChange with event IDs defined in AirMediaInputSlot.

Public propertyCurrentDomainNameFeedback Reports the current domain name of the encoder. This property is not supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

The AirMediaChange event will trigger with AirMediaCurrentDomainNameEventId.

Public propertyDisplayControl Property to get the AirMedia Display Control AirMediaGeneralDisplay.

This property will trigger AirMediaChange with event IDs defined in AirMediaInputSlot.

Public propertyErrorFeedback Displays the device errors.

The AirMediaChange event will trigger with the AirMediaErrorFeedbackEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertyForceSecureLandingPageDisabledFeedback Property that indicates if the webserver's landing page is not forcing HTTPS connections when 'true'.

The AirMediaChange event will trigger with the ForceSecureLandingPageDisabledFeedbackEventId event Id.

Public propertyForceSecureLandingPageEnabledFeedback Property that indicates if the webserver's landing page is forcing HTTPS connections when 'true'.

The AirMediaChange event will trigger with the ForceSecureLandingPageEnabledFeedbackEventId event Id.

Public propertyHostNameFeedback Returns the device's host name.

The AirMediaChange event will trigger with the AirMediaHostNameFeedbackEventId event Id.

Public propertyIpAddressFeedback Returns the device's IP address.

The AirMediaChange event will trigger with the AirMediaIpAddressFeedbackEventId event Id.

Public propertyLoginCode Sets the login code for the AirMedia. Note, this is only valid when the device code is in the Fixed Login Code mode. Any combination of 4 digit number is a valid value.
Public propertyLoginCodeFeedback Returns the login code.

The AirMediaChange event will trigger with the AirMediaLoginCodeEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertyLoginCodeModeFeedback Reports the current login code (access code) mode.

The AirMediaChange event will trigger with the AirMediaLoginCodeModeEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertyLoginCodeTextFeedback Reports the current Login Code.

The AirMediaChange event will trigger with the AirMediaLoginCodeTextFeedbackEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

This property is supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200" devices only.
Public propertyNumberOfUsersConnectedFeedback Indicates the number of users currently connected.

The AirMediaChange event will trigger with the AirMediaNumberOfUserConnectedEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertyNumberOfUsersPresentingFeedback Property to report the maximum number of concurrent users presenting. Valid values will range from 0 to 9. Default value is 0. This property is only supported by AM-3000, AM-3100 and AM-3200 devices.

The AirMediaChange event will trigger with the NumberOfUsersPresentingFeedbackEventId event Id.

Public propertyParent The parent device for this specific slot device.
Public propertyRebootRequiredFeedback Property that indicates there are pending changes that require a reboot. This method is supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

The AirMediaChange event will trigger with the RebootRequiredFeedbackEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertySetMaximumNumberOfWindows Property to set the current allowed maximum number of windows. Valid values will range from 2 to 9. Default value is 9. This property is only supported by AM-3000, AM-3100 and AM-3200 devices.
Public propertySetMaximumNumberOfWindowsFeedback Property to display the current maximum number of windows which has been set by the user. Valid values will range from 2 to 9. Default value is 9. This property is only supported by AM-3000, AM-3100 and AM-3200 devices.

The AirMediaChange event will trigger with the SetMaximumNumberOfWindowsFeedbackEventId event Id.

Public propertyStatusFeedback Reports the status of the AirMedia. Value 0 means 'Idle', Value 1 means 'In session'.

The AirMediaChange event will trigger with the AirMediaStatusFeedbackEventId event Id for "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200".

Public propertyUserDisplayControls Property to get the collection of AirMediaUserDisplay signals. This property is not supported by "AM-200", "AM-300", "AM-3000", "AM-3100" and "AM-3200". This will fire the AirMediaChange event with the "Index" defining the user number
Public propertyUserSpecifiedObject User specific object
Top
See Also