Click or drag to resize

Tpmc8BaseSystem2ReservedSigs Properties

The Tpmc8BaseSystem2ReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyEnableHardButton1DefaultFeedback Indicates the status of the default behavior (toggle keyboard) of hard button 1. When true, this indicates that the default behavior is enabled; when false, the default behavior is disabled.
Public propertyEnterIPTableSetupFeedback Indicates that the "IP Table Setup" dialog is open. The output remains true for as long as the dialog is open.
Public propertyEnterNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is open. The output remains true for as long as the dialog is open.
Public propertyEnterNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is open. The output remains true for as long as the dialog is open.
Public propertyEnterSelectProjectSetupFeedback Indicates that the "Select Project" dialog is open. The output remains true for as long as the dialog is open.
Public propertyExitIPTableSetupFeedback Indicates that the "IP Table Setup" dialog is closed. The output remains true for as long as the dialog is closed.
Public propertyExitNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is closed. The output remains true for as long as the dialog is closed.
Public propertyExitNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is closed. The output remains true for as long as the dialog is closed.
Public propertyExitSelectProjectSetupFeedback Indicates that the "Select Project" dialog is closed. The output remains true for as long as the dialog is closed.
Public propertyHideSystemBarFeedback Indicates that the system bar is hidden. The output remains true for as long as the system bar is hidden.
Public propertyLCDHighLevelDown Lowers the LCD backlight brightness High level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyLCDHighLevelUp Raises the LCD backlight brightness High level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyLCDLevelHigh Sets the LCD backlight brightness High level that will take effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyLCDLevelHighFeedback Reports the LCD brightness level High that will take effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).
Public propertyLCDLevelLow Sets the LCD backlight brightness Low level that will take effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyLCDLevelLowFeedback Reports the LCD brightness level Low that will take effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).
Public propertyLCDLevelMed Sets the LCD backlight brightness Med level that will take effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyLCDLevelMedFeedback Reports the LCD brightness level Med that will take effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).
Public propertyLCDLowLevelDown Lowers the LCD backlight brightness Low level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyLCDLowLevelUp Raises the LCD backlight brightness Low level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyLCDMedLevelDown Lowers the LCD backlight brightness Med level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyLCDMedLevelUp Raises the LCD backlight brightness Med level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Public propertyShowSystemBarFeedback Indicates that the system bar is being displayed. The output remains true for as long as the system bar is displayed.
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also