Click or drag to resize

Tpmc8XGASystemReservedSigs Properties

The Tpmc8XGASystemReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyLCDBrightness Sets the LCD backlight brightness.

Valid values range from 0% (minimum brightness) to 100% (maximum brightness).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyLCDBrightnessAutoOffFeedback Indicates that the panel is currently in auto-mode. The output remains true for as long as auto-mode is turned on.
Public propertyLCDBrightnessAutoOnFeedback Indicates that auto-mode for LCD backlight brightness is turned on. The output remains true for as long as auto-mode is enabled.
Public propertyLCDBrightnessDown Lowers the LCD backlight brightness by 1% each time the input is true.

If the input remains true for 0.5 seconds, the LCD backlight brightness will decrement every 25ms until the input goes false or until it reaches the minimum value of 0%.


(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyLCDBrightnessFeedback Reports the LCD backlight brightness.
(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyLCDBrightnessUp Raises the LCD backlight brightness by 1% each time the input is true.

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyLightSensorValueFeedback Reports the ambient brightness level detected by the light sensor, from 0 to 100.

This value is used to adjust the LCD backlight brightness in auto-mode.

Public propertyPowerDownTimeout Sets the power timeout in minutes (1 = 1 minute).

The power timeout function turns off the touchpanel display, shuts off WiFi and puts the processor to sleep when the touchpanel is inactive for the specified period. The power timeout has no effect when AC power is online.

Valid analog values range from 0 (no power timeout) to 120 (120 minutes).

Public propertyPowerDownTimeoutFeedback Reports the current power timeout period.
Public propertyPowerTimeoutDn Decrements the power timeout by one (1) minute with each rising edge of the input.

The power timeout function turns off the touchpanel display, shuts off WiFi and puts the processor to sleep when the touchpanel is inactive for the specified period. The power timeout has no effect when AC power is online.

If the input remains true for 0.5 seconds, then the power timeout period will continue to decrement every 25ms until the input goes false or until it reaches 0 minutes (no power timeout).

Public propertyPowerTimeoutUp Increments the power timeout by one (1) minute with each rising edge of the input.

The power timeout function turns off the touchpanel display, shuts off WiFi and puts the processor to sleep when the touchpanel is inactive for the specified period. The power timeout has no effect when AC power is online.

If the input remains true for 0.5 seconds, then the power timeout period will continue to increment every 25ms until the input goes false or until it reaches the maximum value of 120 minutes.

Public propertyProjectNameFeedback The filename of the VTPro-e project that is currently loaded into the panel.
Public propertyStandbyTimeout Sets the standby timeout in minutes (1 = 1 minute). The standby timeout is the period from the last use of the touchscreen before going into standby mode (screen display is off but power is on).

Valid values range from 0 (no standby timeout) to 120 (120 minutes).


(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyStandbyTimeoutDown Decrements the standby timeout by one (1) minute each time the input is true.

If the input remains true for 0.5 seconds, then the standby timeout period will continue to decrement every 25ms until the input goes false or until it reaches 0 minutes (no standby timeout).


(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyStandbyTimeoutFeedback Reports the standby timeout period.
(Inherited from Tpmc8BaseSystemReservedSigs)
Public propertyStandbyTimeoutUp Increments the standby timeout by one (1) minute each time the input is true. The standby timeout is the period from the last use of the touchscreen before going into standby mode (screen display is off but power is on).

If the input remains true for 0.5 seconds, then the standby timeout period will continue to increment every 25ms until the input goes false or until it reaches the maximum value of 120 minutes.


(Inherited from Tpmc8BaseSystemReservedSigs)
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also