Click or drag to resize

HdmiOutStreaming Properties

The HdmiOutStreaming type exposes the following members.

Properties
 NameDescription
Public propertyAudioChannelsFeedback Reports the number of audio channels detected.

The StreamChange event will trigger with AudioChannelsEventId for Input Streams.

The StreamChange event will trigger with AudioChannelsEventId for Output Streams.


(Inherited from Stream)
Public propertyAudioFormatFeedback Reports the detected audio format accompanying the video.

The StreamChange event will trigger with AudioFormatEventId for Input Streams.

The StreamChange event will trigger with AudioFormatEventId for Output Streams.

This property is supported for "DmRmc100Str" device.
(Inherited from Stream)
Public propertyBlankDisabledFeedback Property to indicate that the output is unblanked.

The StreamChange event will trigger with BlankDisabledEventId.

This property is not supported by "HdWp4k401C".
Public propertyBlankEnabledFeedback Property to indicate that the output is blanked.

The StreamChange event will trigger with BlankEnabledEventId.

This property is not supported by "HdWp4k401C".
Public propertyConnectedDevice Information about the "Dge100" or "DmTxRx100Str" or "DmRmc100Str" device connected to this stream.

This property will trigger the DeviceInformationChange event with ConnectedDeviceEventIds.

Public propertyDisabledByHdcpFeedback Indicates that the corresponding output has been disabled as the result of a failure during HDCP authentication. This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant. This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.For more information about keys and KSVs, see HDCP. This is supported for some of the devices only. 'true' = Output disabled by HDCP; 'false' = Output not disabled by HDCP

The StreamChange event will trigger with DisabledByHdcpEventId.


(Inherited from Hdmi)
Public propertyDisplayBlankDisabledFeedbackObsolete.
Property to indicate that the output is unblanked.

The StreamChange event will trigger with BlankDisabledEventId.

Public propertyDisplayBlankEnabledFeedbackObsolete.
Property to indicate that the output is blanked.

The StreamChange event will trigger with BlankEnabledEventId.

Public propertyEdidCapabilityFeedback Property to report the output EDID 3D info. This property is supported for "DmDge200C" only.

The StreamChange event will trigger with EdidCapabilityEventId.

Public propertyEdidFeedback Property to return the Output EDID data block. This property is supported for "DmDge200C" only.

The StreamChange event will trigger with EdidEventId.

Public propertyEdidMaximumColorDepthFeedback Property to report the maximum color depth from the EDID. This property is supported for "DmDge200C" only.

The StreamChange event will trigger with EdidMaximumColorDepthEventId.

Public propertyEdidValidFeedback Property to indicate that a valid EDID is detected by the system. This property is supported for "DmDge200C" only.

The StreamChange event will trigger with EdidValidEventId.

Public propertyEncryptionMode Property to set the encryption mode. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyEncryptionModeFeedback Property to report the encryption mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with EncryptionModeEventId for Output Streams.


(Inherited from Stream)
Public propertyEncryptionStatusAsTextFeedback This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with EncryptionStatusEventId for Input Streams.


(Inherited from Stream)
Public propertyEncryptionStatusFeedback Property to report the encryption status of the stream. This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with EncryptionStatusEventId for Input Streams.


(Inherited from Stream)
Public propertyForceHdcpDisabledFeedback Indicates that the "force HDCP" setting is disabled. The output remains 'true' for as long as the setting is disabled. 'true' = Force HDCP disabled; 'false' = No effect

The StreamChange event will trigger with ForceHdcpDisabledEventId.

This property is not supported by "HdWp4k401C" and "AM-200.
Public propertyForceHdcpEnableFeedback Indicates that the "force HDCP" setting is enabled. The output remains 'true' for as long as the setting is enabled. 'true' = Force HDCP enabled; 'false' = No effect

The StreamChange event will trigger with ForceHdcpEnabledEventId.

This property is not supported by "HdWp4k401C" and "AM-200.
Public propertyHdcpMode Property to set the HDCP Mode for the output. If this property is not supported then Unused will be returned and write to this property will be ignored.
Public propertyHdcpModeFeedback Reports the active HDCP Mode for the output. If this property is not supported then Unused will be returned and write to this property will be ignored. This will trigger the "OnStreamChange" with HdcpModeFeedbackEventId.
Public propertyHdcpSupportOffFeedback Property to determine if HDCP support is turned off. 'true' = HDCP Support off; 'false' =HDCP Support on This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
(Inherited from Hdmi)
Public propertyHdcpSupportOnFeedback Property to determine if HDCP support is turned on. 'true' = HDCP Support on; 'false' =HDCP Support off This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
(Inherited from Hdmi)
Public propertyMulticastTTL Property to set the time to live for the multicast. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyMulticastTTLFeedback Property to report the time to live for the multicast. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with MulticastTTLEventId for Output Streams.


(Inherited from Stream)
Public propertyOutputDisabledFeedback Indicates that the HDMI output is disabled. The output remains 'true' for as long as the output is disabled. 'true' = Output disabled; 'false' = Output enabled

The StreamChange event will trigger with OutputDisabledEventId.

Public propertyOutputEnabledFeedback Indicates that the HDMI output is enabled. The output remains 'true' for as long as the output is enabled. 'true' = Output enabled; 'false' = Output disabled

The StreamChange event will trigger with OutputEnabledEventId.

Public propertyOwner This represents the owner of this stream and needs to be cast accordingly.
(Inherited from Stream)
Public propertyResolution Property to set the resolution of the screen.
(Inherited from HdmiOutWithResolution)
Public propertyResolutionFeedback Property to report the current screen resolution.

The StreamChange event will trigger with ResolutionEventId.


(Inherited from HdmiOutWithResolution)
Public propertyRtspFileName Property to set the file name when used in RTSP mode. Default value is = "live.sdp". This property is only valid if the Type is equal to Transmit.
(Inherited from Stream)
Public propertyRtspFileNameFeedback Property to report the file name when used in RTSP mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with RtspFileNameEventId for Output Streams.


(Inherited from Stream)
Public propertyRtspSessionName Property to set the session name when used in RTSP mode. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyRtspSessionNameFeedback Property to report the session name when used in RTSP mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with RtspSessionNameEventId for Output Streams.


(Inherited from Stream)
Public propertyStreamAuthenticatedFeedback Property to report if the stream is authenticated. This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with StreamAuthenticatedEventId for Input Streams.


(Inherited from Stream)
Public propertyStreamCec Get access to the stand alone device's ability to send and receive CEC messages over the HDMI port. Note that the Owner property of the StreamCec object will now point back to the HDMI that owns the port. It used point to the device that owned the HDMI port.

This property will trigger CecChange event with CecEventIds.


(Inherited from Hdmi)
Public propertySyncDetectedFeedback Indicates that video sync levels are detected at the input. The sig remains true for as long as sync is detected.

The StreamChange event will trigger with SourceSyncEventId for Input Streams.

The StreamChange event will trigger with SyncDetectedEventId for Output Streams.


(Inherited from Hdmi)
Public propertyType Property to return the stream type.
(Inherited from Stream)
Public propertyUnderscan Property to set the underscan of the device (used to fit to a display). Available options are 0%, 5%, 10%, 15%. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
Public propertyUnderscanFeedback Property to report that the underscan value of the device. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The StreamChange event will trigger with UnderscanEventId.

This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
Public propertyUnsupportedVideoFeedback Property to indicate if the video is HDMI Input/Output supported video or not. true = HDMI Input/Output unsupported video; false = HDMI Input/Output supported video

The StreamChange event will trigger with UnsupportedVideoEventId.

The StreamChange event will trigger with UnsupportedVideoEventId.

This property is supported by DM-NVX-D10, DM-NVX-D20, DM-NVX-E10 and DM-NVX-E20 devices only.
(Inherited from Hdmi)
Public propertyVideoAttributes Enhanced Video Attributes for the DM device

This property will trigger AttributeChange event with VideoAttributeEventIds.

Top
See Also