EthernetAutodiscoverySetIPTableEntryOnSpecifiedDeviceType(String, UInt16, Int32, Boolean) Method |
Function to send an IP Table entry for this control system to all devices of the specified type.
The devices will require their setup (or equivalent) button pressed to acknowledge and process the new entry.
Namespace: Crestron.SimplSharpAssembly: SimplSharpHelperInterface (in SimplSharpHelperInterface.dll) Version: 2.21.121
Syntaxpublic static EthernetAutodiscoveryeAutoDiscoveryErrors SetIPTableEntryOnSpecifiedDeviceType(
string deviceType,
ushort newIdInHexToSetSpecifiedDeviceTo,
int timeOutInMilliSeconds,
bool noForceAllDevices
)
Parameters
- deviceType String
- Indicates the device type. This type must be present in the currnet DiscoveredElementsList.
- newIdInHexToSetSpecifiedDeviceTo UInt16
- New IP ID of the entry to send. Adds/Modifies an entry within the IPTable on the device.
- timeOutInMilliSeconds Int32
- Timeout in ms for the device the respond to the autodiscovery command. This call will block until the timeout expires or the device responds to the autodiscovery.
0 specifies no timeout. Infinite specifies this call will block until the device responds to the autodiscovery request.
- noForceAllDevices Boolean
- If set to true, the controller will not force all devices on the network into light and poll mode if the specified device type is not found. This requires firmware version 1.013.0000 and higher.
Return Value
EthernetAutodiscoveryeAutoDiscoveryErrorsEthernetAutodiscoveryeAutoDiscoveryErrors enum indicating failure or success.
Exceptions
RemarksCall will return when autodiscovery stop function is invoked, timeout expires, or the device responds to the autodiscovery command.
Invoke the Query or Query(EthernetAdapterType) to populate the discovered element list.
Version Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also