Click or drag to resize

Tpmc12AudioReservedSigs Properties

The Tpmc12AudioReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyAudioSrcCHProgramOffFeedback Indicates that the AUD I/O program audio is off. The output remains high for as long as the audio is disabled.
Public propertyAudioSrcCHProgramOnFeedback Indicates that the AUD I/O program audio is on. The output remains high for as long as the audio is enabled.
Public propertyAudioSrcCHProgramVolume Sets the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyAudioSrcCHProgramVolumeDown Lowers the AUD I/O program audio volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds the volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyAudioSrcCHProgramVolumeFeedback Reports the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyAudioSrcCHProgramVolumeUp Raises the AUD I/O program audio volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the maximum volume is reached.
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyKeyClickOffFeedback Indicates that the key click is off. The output remains high for as long as the key click is off.
Public propertyKeyClickOnFeedback Indicates that the key click is on. The output remains high for as long as the key click is on.
Public propertyKeyClickVolume Sets the Key Click volume level from 0d (min volume) to 65535d (max volume).
Public propertyKeyClickVolumeDown Lowers the key click volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds the volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyKeyClickVolumeFeedback Reports the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyKeyClickVolumeUp Raises the key click volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the maximum volume is reached.
Public propertyLocalAudioBalance Sets the local audio balance. Valid values range from -32768d (full Left) to +32767d (full Right). A value of 0d signifies an even balance between left and right.
Public propertyLocalAudioBalanceFeedback Reports the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyLocalAudioBalanceLeft Adjusts the local audio balance toward the Left channel by 1d with each rising edge of the input. The input has no effect once the balance reaches -32768d (full left). If the input remains high for 0.5 seconds the balance will auto-adjust until the input goes low or until the limit is reached.
Public propertyLocalAudioBalanceRight Adjusts the local audio balance toward the Right channel by 1d with each rising edge of the input. The input has no effect once the balance reaches +32767d (full right). If the input remains high for 0.5 seconds the balance will auto-adjust until the input goes low or until the limit is reached.
Public propertyLocalAudioMuteOffFeedback Indicates that local audio is not muted. The output remains high for as long as the audio is not muted.
Public propertyLocalAudioMuteOnFeedback Indicates that local audio is muted. The output remains high for as long as the audio is muted.
Public propertyLocalAudioVolume Sets the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyLocalAudioVolumeDown Lowers the local audio volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds the volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertyLocalAudioVolumeFeedback Reports the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertyLocalAudioVolumeUp Raises the local audio volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the maximum volume is reached.
Public propertyMicOffFeedback Digital Output Mic Off Feedback
Public propertyMicOnFeedback Digital Output Mic On Feedback
Public propertySpeakersMuteOffFeedback Indicates that speaker audio is not muted. The output remains high for as long as the speakers are not muted.
Public propertySpeakersMuteOnFeedback Indicates that speaker audio is muted. The output remains high for as long as the speakers are muted.
Public propertySpeakersVolume Sets the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertySpeakersVolumeDown Lowers the speaker volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 0%. If the input remains high for 0.5 seconds the volume will auto-decrement until the input goes low or until the volume reaches 0%.
Public propertySpeakersVolumeFeedback Reports the corresponding volume level from 0d (min volume) to 65535d (max volume).
Public propertySpeakersVolumeUp Raises the speaker volume by 1% with each rising edge of the input. The input has no effect once the volume reaches 100%. If the input remains high for 0.5 seconds the volume will auto-increment until the input goes low or until the maximum volume is reached.
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also