Air |
The AirMediaGeneralDisplay type exposes the following members.
| Name | Description | |
|---|---|---|
| AddressDisplayDisableFeedback |
Reports if hostname and domain name display is disabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayAddressDisabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| AddressDisplayEnableFeedback |
Reports if hostname and domain name display is enabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayAddressEnabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| AirMediaConnectionOverlayDisabledFeedback |
Reports if the AirMedia connection information is not overlayed when AirMedia Canvas is enabled and multiple users are present.
Only supported for AM-200/AM-300 devices. This property is not supported on DMPS3-4K-350-C/250-C product. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaConnectionOverlayDisabledFeedbackEventId" when the state of this field changes. | |
| AirMediaConnectionOverlayEnabledFeedback |
Reports if the AirMedia connection information is overlayed when AirMedia Canvas is enabled and multiple users are present.
Only supported for AM-200/AM-300 devices. This property is not supported on DMPS3-4K-350-C/250-C product. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaConnectionOverlayEnabledFeedbackEventId" when the state of this field changes. | |
| CustomURL | Set the URL for Custom URL on the ODS for the AirMedia connection. | |
| CustomURLFeedback |
Reports the URL for the Custom URL on the OSD for the AirMedia connection.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.CustomURLFeedbackEventId". | |
| DisplayConnectionOption |
Sets the display connection option.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.DisplayConnectionOptionEventId". This property is only supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayConnectionOptionDisabledFeedback |
Reports if display connection option is disabled.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaDisplayConnectionOptionDisabledEventId". For Dmps3AirMediaInput card,theDMInputChangewill trigger with AirMediaDisplayConnectionOptionDisabledEventId. This property is only supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayConnectionOptionEnabledFeedback |
Reports if display connection option is enabled.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaDisplayConnectionOptionEnabledEventId". For Dmps3AirMediaInput card,theDMInputChangewill trigger with AirMediaDisplayConnectionOptionEnabledEventId. This property is only supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayConnectionOptionFeedback |
Reports the current display connection option.
For Dmps3AirMediaInput card, the DMInputChangewill trigger with AirMediaDisplayConnectionOptionEventId. For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaDisplayConnectionOptionEventId". This property is only supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayCustomUrlDisabledFeedback |
Reports if display custom URL is disabled.
When this signal is used on a switch based control system, the DMInputChange event will trigger with AirMediaDisplayCustomUrlDisabledEventId. This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayCustomUrlEnabledFeedback |
Reports if display custom URL is enabled.
When this signal is used on a switch based control system, the DMInputChange event will trigger with AirMediaDisplayCustomUrlEnabledEventId. This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DisplayTimeout |
Sets the timeout to display the OSD after a user disconnects.
The valid value range is 1 to 300. Value 1 means 1 second. Value 0 means infinity.
This property is not supported on all platforms.
This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C.
| |
| DisplayTimeoutFeedback |
Reports the timeout value for displaying the OSD after a user disconnects.
The valid value range is 1 to 300. Value 1 means 1 second. Value 0 means infinity. This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C. For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.OSDTimeoutEventId" | |
| DomainNameDisplayDisableFeedback |
Reports if domain name display is disabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayDomainNameDisabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| DomainNameDisplayEnableFeedback |
Reports if domain name display is enabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayDomainNameEnabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| ImageErrorFeedback |
Reports an error if there was a problem displaying the image at ImageURL. Value 0 means OK.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ImageErrorFeedbackEventId". For Dmps3AirMediaInput card,theDMInputChangewill trigger with AirMediaImageErrorEventId. For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.AirMediaImageErrorEventId" | |
| ImageURL | Sets the URL for the image. Supports HTTP,HTTPS and FTP. This property is not supported by AM-200 and AM-300 devices. | |
| ImageURLFeedback |
Reports the URL for the image. Supports HTTP,HTTPS and FTP.
This property is not supported by AM-200 and AM-300 devices.
For Dmps3AirMediaInput card,theDMInputChange will trigger with AirMediaImageURLEventId. For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ImageURLFeedbackEventId". For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.AirMediaImageURLEventId" | |
| IPAddressDisplayDisableFeedback |
Reports if IP address display is disabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayIPAddressDisabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| IPAddressDisplayEnableFeedback |
Reports if IP address display is enabled.
For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayIPAddressEnabledEventId" This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. | |
| LoginCodeDisplayDisableFeedback |
Reports if Login Code display is disabled.
For Dmps3AirMediaInput card,theDMInputChangewill trigger with DMInputEventIds. For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaDisplayLoginCodeDisabledEventId". For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayLoginCodeDisabledEventId" | |
| LoginCodeDisplayEnableFeedback |
Reports if Login Code display is enabled.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.AirMediaDisplayLoginCodeEnabledEventId". For Dmps3AirMediaInput card,theDMInputChange will trigger with AirMediaDisplayLoginCodeEnabledEventId. For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.DisplayIPAddressEnabledEventId" | |
| ShowOSDFeedback |
Reports if the OSD is being displayed.
This property is not supported on "AM-200", "AM-300" and DMPS3-4K-350-C/250-C product. For the "Am100" and "Am101" device, this will fire the "BaseEvent" with event Id "Am100.OSDDisplayedFeedbackEventId" | |
| ShowWiFiAddressCustom |
The custom string to appear on the OSD as the WiFi's Address when ShowWiFiAddressOptions is set to Custom.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiAddressCustomFeedback |
Property to report the custom string that will represent the WiFi's Address when ShowWiFiAddressOptions is set to Custom.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiAddressCustomFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiAddressDisabledFeedback |
Reports if the WiFi address information will not be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiAddressDisabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiAddressEnabledFeedback |
Reports if the WiFi address information will be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiAddressEnabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiAddressOptions |
Sets how the WiFi's Address will be shown on the OSD of this device.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiAddressOptionsFeedback |
Reports the current option selected for how the WiFi's Address is shown on the OSD.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiAddressOptionsFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiKeyCustom |
The custom string to appear on the OSD as the WiFi's Key when ShowWiFiKeyOptions is set to ShowCustomValue.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiKeyCustomFeedback |
Reports the custom string that will represent the WiFi's key when ShowWiFiKeyOptions is set to ShowCustomValue.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiKeyCustomFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiKeyDisabledFeedback |
Reports if the WiFi key information will not be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiKeyDisabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiKeyEnabledFeedback |
Reports if the WiFi key information will be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiKeyEnabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiKeyOptions |
Sets how the WiFi's Key will be shown on the OSD of this device.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiKeyOptionsFeedback |
Reports the current option selected for how the WiFi's Key is shown on the OSD.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiKeyOptionsFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiSsidCustom |
The custom string to appear on the OSD as the WiFi's SSID when ShowWiFiSsidOptions is set to ShowCustomValue.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiSsidCustomFeedback |
Report the custom string that will represent the WiFi's SSID when ShowWiFiSsidOptions is set to ShowCustomValue.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiSsidCustomFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiSsidDisabledFeedback |
Reports if the WiFi SSID information will not be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiSsidDisabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiSsidEnabledFeedback |
Reports if the WiFi SSID information will be shown on the OSD.
Only supported for AM-200/AM-300 devices. The "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiSsidEnabledFeedbackEventId" when the state of this field changes. | |
| ShowWiFiSsidOptions |
Sets how the WiFi's SSID will be shown on the OSD of this device.
This property is only supported on "AM-200" and "AM-300" products. | |
| ShowWiFiSsidOptionsFeedback |
Reports the current option selected for how the WiFi's SSID is shown on the OSD.
For AM-200 and AM-300, the "AirMediaInputSlot.AirMediaChange" will trigger with "AirMediaInputSlot.ShowWiFiSsidOptionsFeedbackEventId". This property is only supported on "AM-200" and "AM-300" products. |