BACnet |
The BACnetRemoteMultiStateValueObject type exposes the following members.
| Name | Description | |
|---|---|---|
| CovLifetime |
Parameter to specify the default Change of Value (COV) notification lifetime in minutes. Default value is 30 minutes.
(Inherited from BACnetRemoteCommonObject) | |
| Disposed |
Property to indicate if the Device has been disposed.
(Inherited from BACnetObject) | |
| EventStateFeedback |
Property to indicate the event state associated with the object.
This property will trigger BACnetObjectChange event with EventStateFeedbackEventId. (Inherited from BACnetRemoteCommonObject) | |
| Id |
A 22-bit decimal number that serves as an unique address of the object within the BACnet device.
Valid range from 0 to 4194302.
(Inherited from BACnetObject) | |
| NumberOfStatesFeedback |
Property to report the number of states the PresentValueFeedback may have.
The BACnetObjectChange event will trigger with NumberOfStatesFeedbackEventId. (Inherited from BACnetRemoteMultiStateInputObject) | |
| OutOfServiceFeedback |
Property to report whether the BACnet object is functioning as expected or not.
true means the object is out of service.
false means it is in service.
This property will trigger BACnetObjectChange event with OutOfServiceChangedEventId. (Inherited from BACnetRemoteCommonObject) | |
| Parent |
The parent that a given object was added to.
(Inherited from BACnetObject) | |
| PresentValue |
Property to set the current present value of the object.
(Inherited from BACnetRemoteMultiStateValueOutputCommonObject) | |
| PresentValueChangedFeedback |
Property to report whether there has been any change in the PresentValueFeedback. Changes from false to true and again changes to false when PresentValueFeedback changes.
This property will trigger BACnetObjectChange event with PresentValueChangedEventId. (Inherited from BACnetRemoteMultiStateInputObject) | |
| PresentValueFeedback |
Property to report the present value of the object.
The BACnetObjectChange event will trigger with PresentValueFeedbackEventId. (Inherited from BACnetRemoteMultiStateInputObject) | |
| Priority |
Parameter to specify the BACnet priority level at which the object will communicate.
There are 16 levels of priority, where level 1 denotes the highest priority and level 16 - the lowest.
(Inherited from BACnetRemoteCommonObject) | |
| PriorityForPresentValueFeedback |
Indicates the write priority of the present value recently received from the remote device.
This property value is updated either by calling PollForValue method or
by sending an RPM request for this object internally from the BACnet Stack to the Host Device.
This property is not supported on firmware with version less than "4.0003.00005" on VC4 platforms.
This property is not supported on firmware with version less than "2.8004.00001" on 4-Series platform.
This property is not supported on 3-Series platforms.
This property will trigger BACnetObjectChange event with PriorityForPresentValueFeedbackEventId. (Inherited from BACnetRemoteMultiStateValueOutputCommonObject) | |
| RelinquishDefault |
Property to set the Relinquish Default.
This property value indicates the default Present Value property value and is assigned to the Present Value when all the entries in the Priority Array are NULL.
(Inherited from BACnetRemoteMultiStateValueOutputCommonObject) | |
| ScanRate |
Parameter to specify the default time interval (in seconds) for polling the device properties.
This parameter will be ignored if the user chooses to set the polling interval by using the VariableScanRate.
Default value = 30s.
(Inherited from BACnetRemoteCommonObject) | |
| StateTextFeedback |
Property to report the state associated with the current PresentValueFeedback.
This property will trigger BACnetObjectChange event with StateTextFeedbackEventId. (Inherited from BACnetRemoteMultiStateInputObject) | |
| StatusFlagsFeedback |
Property to report the state of the four Boolean flags that indicate the general "health" of the remote object.
This property will trigger BACnetObjectChange event with StatusFlagsFeedbackEventId. (Inherited from BACnetRemoteCommonObject) | |
| SubscribeCov |
Parameter that indicates if the BACnet device subscribes to Change of Value (COV) notification.
Valid values as follows:
true = subscribes to COV notification; false = Does not subscribe COV notification
Default-value = true (subscribes to COV notification)
(Inherited from BACnetRemoteCommonObject) | |
| Type |
Type of the BACnet object.
(Inherited from BACnetObject) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from BACnetObject) | |
| VariableScanRate |
When non-zero, will cause the BACnet stack to poll for the value periodically.
When set to zero will poll for value at the specified interval set by the ScanRate parameter.
(Inherited from BACnetRemoteCommonObject) | |
| WritePriority |
Write priority of this object.
(Inherited from BACnetRemoteMultiStateValueOutputCommonObject) |