Dmps |
The Dmps3AecOutputEqualizer type exposes the following members.
| Name | Description | |
|---|---|---|
| Bass | Adjusts the bass settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB. | |
| BassDown | Decrease the bass level of the specified output. | |
| BassFeedback |
Returns the current bass settings for the specified output.
Valid values range from -180 (-18dB) to 180 (+18dB).
A value of 0 signifies a flat level corresponding to 0dB.
The DMOutputChange event will trigger with BassFeedbackEventId. | |
| BassUp | Increase the bass level of the specified output. | |
| EqualizerType |
The type of equalizer available.
(Inherited from OutputEqualizerBase) | |
| GeqGain125Hz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 125Hz frequency band. | |
| GeqGain125HzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 125Hz frequency band.
The DMOutputChange event will trigger with GeqGain125HzFeedbackEventId. | |
| GeqGain16KHz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 16KHz frequency band. | |
| GeqGain16KHzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 16KHz frequency band.
The DMOutputChange event will trigger with GeqGain16KHzFeedbackEventId. | |
| GeqGain1KHz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 1KHz frequency band. | |
| GeqGain1KHzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 1KHz frequency band.
The DMOutputChange event will trigger with GeqGain1KHzFeedbackEventId. | |
| GeqGain250Hz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 250Hz frequency band. | |
| GeqGain250HzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 250Hz frequency band.
The DMOutputChange event will trigger with GeqGain250HzFeedbackEventId. | |
| GeqGain2KHz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 2KHz frequency band. | |
| GeqGain2KHzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 2KHz frequency band.
The DMOutputChange event will trigger with GeqGain2KHzFeedbackEventId. | |
| GeqGain315Hz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 31.5Hz frequency band. | |
| GeqGain315HzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 31.5Hz frequency band.
The DMOutputChange event will trigger with GeqGain315HzFeedbackEventId. | |
| GeqGain4KHz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 4KHz frequency band. | |
| GeqGain4KHzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 4KHz frequency band.
The DMOutputChange event will trigger with GeqGain4KHzFeedbackEventId. | |
| GeqGain500Hz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 500Hz frequency band. | |
| GeqGain500HzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 500Hz frequency band.
The DMOutputChange event will trigger with GeqGain500HzFeedbackEventId. | |
| GeqGain63Hz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 63Hz frequency band. | |
| GeqGain63HzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 63Hz frequency band.
The DMOutputChange event will trigger with GeqGain63HzFeedbackEventId. | |
| GeqGain8KHz | Adjusts the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 8KHz frequency band. | |
| GeqGain8KHzFeedback |
Reports the gain of the graphic equalizer from -120 (-12dB) to +120 (+12db) at the 8KHz frequency band.
The DMOutputChange event will trigger with GeqGain8KHzFeedbackEventId. | |
| LimiterAttack | Sets the attack time, which is the time in milliseconds that it takes the limiter to start clipping the signal level after the threshold has been exceeded. Valid values range from 1 (0.1ms) to 3000 (300ms). | |
| LimiterAttackFeedback |
Retrieves the attack time, which is the time in milliseconds that it takes the limiter to start clipping the signal level after the threshold has been exceeded.
Valid values range from 1 (0.1ms) to 3000 (300ms).
The DMOutputChange event will trigger with LimiterAttackFeedbackEventId. | |
| LimiterDisableFeedback |
Indicates that limiting is disabled.
The DMOutputChange event will trigger with LimiterDisableFeedbackEventId. | |
| LimiterEnableFeedback |
Indicates that limiting is enabled.
The DMOutputChange event will trigger with LimiterEnableFeedbackEventId. | |
| LimiterHold | Sets the limiter dynamics hold time, in milliseconds. Valid values range from 1 (1ms)to 200 (200ms). | |
| LimiterHoldFeedback |
Retrieves the limiter dynamics hold time, in milliseconds.
Valid values range from 1 (1ms)to 200 (200ms).
The DMOutputChange event will trigger with LimiterHoldFeedbackEventId. | |
| LimiterRatio | Sets the limiter ratio, which controls the amount of gain reduction to apply when the mic signal level exceeds the threshold. Valid values range from 1 (1:1) to 10 (10:1). | |
| LimiterRatioFeedback |
Retrieves the limiter ratio, which controls the amount of gain reduction to apply when the mic signal level exceeds the threshold.
Valid values range from 1 (1:1) to 10 (10:1).
The DMOutputChange event will trigger with LimiterRatioFeedbackEventId. | |
| LimiterRelease | Sets the release time, which is the time over which the limiter will stop clipping after the signal crosses under the threshold. Valid values range from 1 (1ms) to 1000 (1000ms) | |
| LimiterReleaseFeedback |
Retrieves the release time, which is the time over which the limiter will stop clipping after the signal crosses under the threshold.
Valid values range from 1 (1ms) to 1000 (1000ms)
The DMOutputChange event will trigger with LimiterReleaseFeedbackEventId. | |
| LimiterSoftKneeOffFeedback |
Indicates that soft knee limiting is disabled.
When soft knee limiting is enabled, this signifies that limiting will be applied gradually, depending on how far the signal is from the threshold.
The slower onset can make the limiting less noticeable, especially when using high compression ratios.
When soft knee limiting is disabled, this will apply normal (hard knee) limiting.
This signifies that as soon as the signal exceeds the threshold, it is clipped immediately to the threshold.
The DMOutputChange event will trigger with LimiterSoftKneeOffFeedbackEventId. | |
| LimiterSoftKneeOnFeedback |
Indicates that soft knee limiting is enabled.
When soft knee limiting is enabled, this signifies that limiting will be applied gradually, depending on how far the signal is from the threshold.
The slower onset can make the limiting less noticeable, especially when using high compression ratios.
When soft knee limiting is disabled, this will apply normal (hard knee) limiting.
This signifies that as soon as the signal exceeds the threshold, it is clipped immediately to the threshold.
The DMOutputChange event will trigger with LimiterSoftKneeOnFeedbackEventId. | |
| LimiterThreshold | Sets the limiting threshold. Valid values range from -800 (-80dB) to 0 (0dB) Once the signal exceeds the threshold, the limiter will clip the level to the threshold value. In this way, the output signal level will never exceed the threshold. | |
| LimiterThresholdFeedback |
Retrieves the limiting threshold.
Valid values range from -800 (-80dB) to 0 (0dB)
Once the signal exceeds the threshold, the limiter will clip the level to the threshold value.
In this way, the output signal level will never exceed the threshold.
The DMOutputChange event will trigger with LimiterThresholdFeedbackEventId. | |
| Parent |
The parent that a given object was added to.
(Inherited from OutputEqualizerBase) | |
| PeqFilter1Bandwidth | Sets the bandwidth for filter 1. Valid values range from 20 to 3500. | |
| PeqFilter1BandwidthFeedback |
Reports the bandwidth for filter 1.
Valid values range from 20 to 3500.
The DMOutputChange event will trigger with PeqFilter1BandwidthFeedbackEventId. | |
| PeqFilter1Frequency | Sets the frequency for filter 1. Valid values range from 10 (10Hz) to 22000 (22kHz). | |
| PeqFilter1FrequencyFeedback |
Reports the frequency for filter 1.
Valid values range from 10 (10Hz) to 22000 (22kHz).
The DMOutputChange event will trigger with PeqFilter1FrequencyFeedbackEventId. | |
| PeqFilter1Gain | Sets the gain for the filter 1. Valid values range from -360 (-36dB) to 240 (24dB). | |
| PeqFilter1GainFeedback |
Reports the gain for the filter 1.
Valid values range from -360 (-36dB) to 240 (24dB).
The DMOutputChange event will trigger with PeqFilter1GainFeedbackEventId. | |
| PeqFilter1Type | Selects the parametric filter type for Filter 1. | |
| PeqFilter1TypeFeedback |
Reports the parametric filter type for Filter 1.
The DMOutputChange event will trigger with PeqFilter1TypeFeedbackEventId. | |
| PeqFilter2Bandwidth | Sets the bandwidth for filter 2. Valid values range from 20 to 3500. | |
| PeqFilter2BandwidthFeedback |
Reports the bandwidth for Filter 2.
Valid values range from 20 to 3500.
The DMOutputChange event will trigger with PeqFilter2BandwidthFeedbackEventId. | |
| PeqFilter2Frequency | Sets the frequency for filter 2. Valid values range from 10 (10Hz) to 22000 (22kHz). | |
| PeqFilter2FrequencyFeedback |
Reports the frequency for Filter 2.
Valid values range from 10 (10Hz) to 22000 (22kHz).
The DMOutputChange event will trigger with PeqFilter2FrequencyFeedbackEventId. | |
| PeqFilter2Gain | Sets the gain for the filter 2. Valid values range from -360 (-36dB) to 240 (24dB). | |
| PeqFilter2GainFeedback |
Reports the gain for the Filter 2.
Valid values range from -360 (-36dB) to 240 (24dB).
The DMOutputChange event will trigger with PeqFilter2GainFeedbackEventId. | |
| PeqFilter2Type | Selects the parametric filter type for Filter 2. | |
| PeqFilter2TypeFeedback |
Reports the parametric filter type for Filter 2.
The DMOutputChange event will trigger with PeqFilter2TypeFeedbackEventId. | |
| PeqFilter3Bandwidth | Sets the bandwidth for filter 3. Valid values range from 20 to 3500. | |
| PeqFilter3BandwidthFeedback |
Reports the bandwidth for Filter 3.
Valid values range from 20 to 3500.
The DMOutputChange event will trigger with PeqFilter3BandwidthFeedbackEventId. | |
| PeqFilter3Frequency | Sets the frequency for filter 3. Valid values range from 10 (10Hz) to 22000 (22kHz). | |
| PeqFilter3FrequencyFeedback |
Reports the frequency for Filter 3.
Valid values range from 10 (10Hz) to 22000 (22kHz).
The DMOutputChange event will trigger with PeqFilter3FrequencyFeedbackEventId. | |
| PeqFilter3Gain | Sets the gain for the filter 3. Valid values range from -360 (-36dB) to 240 (24dB). | |
| PeqFilter3GainFeedback |
Reports the gain for the Filter 3.
Valid values range from -360 (-36dB) to 240 (24dB).
The DMOutputChange event will trigger with PeqFilter3GainFeedbackEventId. | |
| PeqFilter3Type | Selects the parametric filter type for Filter 3. | |
| PeqFilter3TypeFeedback |
Reports the parametric filter type for Filter 3.
The DMOutputChange event will trigger with PeqFilter3TypeFeedbackEventId. | |
| PeqFilter4Bandwidth | Sets the bandwidth for Filter 4. Valid values range from 20 to 3500. | |
| PeqFilter4BandwidthFeedback |
Reports the bandwidth for Filter 4.
Valid values range from 20 to 3500.
The DMOutputChange event will trigger with PeqFilter4BandwidthFeedbackEventId. | |
| PeqFilter4Frequency | Sets the frequency for Filter 4. Valid values range from 10 (10Hz) to 22000 (22kHz). | |
| PeqFilter4FrequencyFeedback |
Reports the frequency for Filter 4.
Valid values range from 10 (10Hz) to 22000 (22kHz).
The DMOutputChange event will trigger with PeqFilter4FrequencyFeedbackEventId. | |
| PeqFilter4Gain | Sets the gain for the Filter 4. Valid values range from -360 (-36dB) to 240 (24dB). | |
| PeqFilter4GainFeedback |
Reports the gain for the Filter 4.
Valid values range from -360 (-36dB) to 240 (24dB).
The DMOutputChange event will trigger with PeqFilter4GainFeedbackEventId. | |
| PeqFilter4Type | Selects the parametric filter type for Filter 4. | |
| PeqFilter4TypeFeedback |
Reports the parametric filter type for Filter 4.
The DMOutputChange event will trigger with PeqFilter4TypeFeedbackEventId. | |
| Treble | Adjusts the treble settings for the specified output. Valid values range from -180 (-18dB) to 180 (+18dB). A value of 0 signifies a flat level corresponding to 0dB. | |
| TrebleDown | Decrease the treble level of the specified output. | |
| TrebleFeedback |
Returns the current treble settings for the specified output.
Valid values range from -180 (-18dB) to 180 (+18dB).
A value of 0 signifies a flat level corresponding to 0dB.
The DMOutputChange event will trigger with TrebleFeedbackEventId. | |
| TrebleUp | Increase the treble level of the specified output. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from OutputEqualizerBase) |