Click or drag to resize

Tpmc8LSystem2ReservedSigs Class

Extender class to provide access to the System2 Reserved Sigs feature of the TPMC-8L Touch Screen.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpProDeviceExtender
    Crestron.SimplSharpPro.UITpmc8BaseSystem2ReservedSigs
      Crestron.SimplSharpPro.UITpmc8LSystem2ReservedSigs

Namespace: Crestron.SimplSharpPro.UI
Assembly: Crestron.SimplSharpPro.UI (in Crestron.SimplSharpPro.UI.dll) Version: 2.21.121
Syntax
C#
public class Tpmc8LSystem2ReservedSigs : Tpmc8BaseSystem2ReservedSigs

The Tpmc8LSystem2ReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyBacklightBrightness Sets the hard key backlight brightness.

Valid values range from 0% (minimum brightness) to 100% (maximum brightness).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyBacklightBrightnessDown Lowers the hard key backlight brightness by 1%.

If the input remains true for 0.5 seconds, the hard key backlight brightness will decrement every 25ms until the input goes false or until it reaches the minimum value of 0%.

Public propertyBacklightBrightnessFeedback Reports the hard key backlight brightness.
Public propertyBacklightBrightnessUp Raises the hard key backlight brightness by 1%.

If the input remains true for 0.5 seconds, the hard key backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.

Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyEnableHardButton1DefaultFeedback Indicates the status of the default behavior (toggle keyboard) of hard button 1. When true, this indicates that the default behavior is enabled; when false, the default behavior is disabled.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyEnterIPTableSetupFeedback Indicates that the "IP Table Setup" dialog is open. The output remains true for as long as the dialog is open.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyEnterNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is open. The output remains true for as long as the dialog is open.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyEnterNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is open. The output remains true for as long as the dialog is open.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyEnterSelectProjectSetupFeedback Indicates that the "Select Project" dialog is open. The output remains true for as long as the dialog is open.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyExitIPTableSetupFeedback Indicates that the "IP Table Setup" dialog is closed. The output remains true for as long as the dialog is closed.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyExitNetworkIdentificationSetupFeedback Indicates that the "Network ID" dialog is closed. The output remains true for as long as the dialog is closed.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyExitNetworkSharingSetupFeedback Indicates that the "Network Sharing" dialog is closed. The output remains true for as long as the dialog is closed.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyExitSelectProjectSetupFeedback Indicates that the "Select Project" dialog is closed. The output remains true for as long as the dialog is closed.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyHideSystemBarFeedback Indicates that the system bar is hidden. The output remains true for as long as the system bar is hidden.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDHighLevelDown Lowers the LCD backlight brightness High level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDHighLevelUp Raises the LCD backlight brightness High level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelHigh Sets the LCD backlight brightness High level that will take effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelHighFeedback Reports the LCD brightness level High that will take effect when the LCDBrightnessHigh input is true (found on the TPMC-8L System Reserved Joins extender).
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelLow Sets the LCD backlight brightness Low level that will take effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelLowFeedback Reports the LCD brightness level Low that will take effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelMed Sets the LCD backlight brightness Med level that will take effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

Valid values range from 0% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLevelMedFeedback Reports the LCD brightness level Med that will take effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLowLevelDown Lowers the LCD backlight brightness Low level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDLowLevelUp Raises the LCD backlight brightness Low level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessLow input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDMedLevelDown Lowers the LCD backlight brightness Med level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyLCDMedLevelUp Raises the LCD backlight brightness Med level by 1% when the input is true.

The brightness level takes effect when the LCDBrightnessMed input is true (found on the TPMC-8L System Reserved Joins extender).

If the input remains true for 0.5 seconds, the LCD backlight brightness will increment every 25ms until the input goes false or until it reaches the maximum value of 100%.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public propertyShowSystemBarFeedback Indicates that the system bar is being displayed. The output remains true for as long as the system bar is displayed.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
Methods
 NameDescription
Public methodClearHistory Empties the History folder. This folder stores shortcuts to previously viewed Web pages.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodDeleteTempFiles Deletes the contents of the Temporary Internet Files folder. This folder stores cookies and previously viewed Web pages.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEnableHardButton1Default Enables the default behavior of hard button 1 for as long as the input is true. The default function of hard button 1 is to toggle the keyboard. When in this mode all VT Pro-e settings are ignored.

When the input is false, this disables the default behavior and enables the settings specified in the VT Pro-e project, including page flips and digital press sigs assigned at the project and page level. (The keyboard can still be controlled via the Open/Close State join—see TPMC-8L.)


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEnterIPTableSetup Opens the "IP Table Setup" dialog. This dialog configures the IP Table of the panel (not the control system IP Table).
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEnterNetworkIdentificationSetup Opens the "Network ID" dialog. This dialog configures the hostname and workgroup.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEnterNetworkSharingSetup Opens the "Network Sharing" dialog. This dialog configures shared folders and user permissions.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEnterSelectProjectSetup Opens the "Select Project" dialog. This dialog is used to locate and upload the VT Pro-e project.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodExitIPTableSetup Closes the "IP Table Setup" dialog.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodExitNetworkIdentificationSetup Closes the "Network ID" dialog.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodExitNetworkSharingSetup Closes the "Network Sharing" dialog.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodExitSelectProjectSetup Closes the "Select Project" dialog.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Protected methodFinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodHideSystemBar Hides the system bar.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Protected methodInitializeJoins Method to initialize the sigs of the 8L System2 extender
(Overrides Tpmc8BaseSystem2ReservedSigsInitializeJoins)
Protected methodMapAnalogInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapAnalogOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodResumeFromStandby Takes the panel out of standby mode.

The input has no effect if the panel is not currently in standby mode.


(Inherited from Tpmc8BaseSystem2ReservedSigs)
Protected methodSendCueEventDataForDeviceExtender Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender)
Public methodShowSystemBar Shows the system bar.
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodStandby Puts the panel into standby mode (screen display is off but power is on).
(Inherited from Tpmc8BaseSystem2ReservedSigs)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodUse Set the extender as usable on the device. Call this method before registration of the device.
(Inherited from DeviceExtender)
Top
Events
 NameDescription
Public eventDeviceExtenderSigChange Event to receive sig information intended for a device extender. When processing this event, it will hold off other sigs from being received from the device. If one desires to continue processing the data and receive more information, launch a new thread and allow this event to exit.
(Inherited from DeviceExtender)
Top
Fields
 NameDescription
Protected field_InUse Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also