Click or drag to resize

Dmps3DmHdmiOutputMixer Class

Mix control for the Dmps3 DmHdmi output stream.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.DeviceSupportOutputMixerBase
    Crestron.SimplSharpPro.DeviceSupportDmps3DmHdmiOutputMixer

Namespace: Crestron.SimplSharpPro.DeviceSupport
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public sealed class Dmps3DmHdmiOutputMixer : OutputMixerBase, 
	IDmps3OutputMixer

The Dmps3DmHdmiOutputMixer type exposes the following members.

Properties
 NameDescription
Public propertyDelay Not supported on the DmHdmi Output stream.
Public propertyDelayFeedback Not supported on the DmHdmi Output stream.
Public propertyMaxVolume Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -300 (-30dB) to 100 (10dB).
Public propertyMaxVolumeFeedback Reports the current maximum volume gain, in tenths of a dB. Valid values range from -300 (-30dB) to 100 (10dB).
Public propertyMicLevel Property to set the value of the level for a given microphone on this output.
Public propertyMicLevelDown Decrease the Microphone level for a given microphone as long as the sig is true.
Public propertyMicLevelFeedback Property to read the feedback level for a given microphone on this output.
Public propertyMicLevelUp Increase the Microphone level for a given microphone as long as the sig is true.
Public propertyMicMuteOffFeedback Property to return the state of the MicMuteOffFeedback for a given microphone on this output
Public propertyMicMuteOnFeedback Property to return the state of the MicMuteOnFeedback for a given microphone on this output.
Public propertyMicPan Property to set the value of the pan for a given microphone on this output.
Public propertyMicPanFeedback Property to read the pan level for a given microphone on this output.
Public propertyMinVolume Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -800 (-80dB) to -400 (-40dB).
Public propertyMinVolumeFeedback Reports the current minimum volume gain, in tenths of a dB. Valid values range from -800 (-80dB) to -400 (-40dB).
Public propertyMixerBypassedFeedback Indicates that the routed audio input is in mixer bypass mode. Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM. On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer. The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted. Mixer bypass mode is only controllable via the DMPS Tool.
Public propertyOutputMixerType The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase)
Public propertyOutputVuFeedback Reports the VU meter feedback value, when VU feedback is enabled. Reported values will range from 0 to 8.
Public propertyParent The parent that a given object was added to.
(Inherited from OutputMixerBase)
Public propertyStartupVolume Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyStartupVolumeFeedback Reports the current startup volume in tenths of a dB. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from OutputMixerBase)
Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodMicMuteOff UnMute the given microphone on this output.
Public methodMicMuteOn Mute the given microphone on this output.
Public methodMicMuteToggle Toggle between muting or unmuting the specified microphone.
Public methodToString String representation of this DM output mixer.
(Inherited from OutputMixerBase)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also