Click or drag to resize

UsbSw200 Properties

The UsbSw200 type exposes the following members.

Properties
 NameDescription
Public propertyAutoRouteOffFeedback Property to indicate that the auto route is disabled. true: auto route disabled; false: auto route enabled.

The DMSystemChange event will trigger with AutoRouteOffEventId.


(Inherited from UsbSwBase)
Public propertyAutoRouteOnFeedback Property to indicate that the auto route is enabled true: auto route enabled; false: auto route disabled

The DMSystemChange event will trigger with AutoRouteOnEventId.


(Inherited from UsbSwBase)
Public propertyConfigurationErrorFeedback Property to report the recently detected configuration error.

The DMSystemChange event will trigger with ConfigurationErrorFeedbackEventId.


(Inherited from UsbSwBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyDownloadConfigurationFeedback Property to indicate that the downloading of the configuration file is going on to the USB stick if plugged in. This property value remains "true" until Download of the configuration is completed. Check ConfigurationErrorFeedback for any error related to the download config operation.

The DMSystemChange event will trigger with DownloadConfigurationEventId.


(Inherited from UsbSwBase)
Public propertyEnableUSBBreakaway Enables USB breakaway for as long as the input is 'true'. This allows USB to be routed independently from video. If USB breakaway is not enabled, the USB routes will follow the selected video routes, and the "USBOut#" inputs will have no effect. 'true' (level-sensitive) = Enable USB breakaway; 'false' = Disable USB breakaway This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Public propertyEnableUSBBreakawayFeedback Indicates that USB breakaway is enabled. The output remains high for as long as USB breakaway is enabled. 'true' = USB breakaway enabled; 'false' = USB breakaway disabled This property is not supported by HD-RX-4K-X01 switches

The DMSystemChange event will trigger with the USBBreakawayEventId if the switcher is a device.


(Inherited from Switch)
Public propertyFirmwareVersionFeedback Reports the current firmware version of the unit.

The DMSystemChange event will trigger with FirmwareVersionFeedbackEventId.


(Inherited from UsbSwBase)
Public propertyFrontPanelLedDisabledFeedback Property to indicate that the front LED is disabled.

The DMSystemChange event will trigger with FrontPanelLedDisabledEventId.


(Inherited from UsbSwBase)
Public propertyFrontPanelLedEnabledFeedback Property to indicate that the front LED is enabled.

The DMSystemChange event will trigger with FrontPanelLedEnabledEventId.


(Inherited from UsbSwBase)
Public propertyFrontPanelLockDisabledFeedback Property to indicate that the front panel lock is disabled.

The DMSystemChange event will trigger with FrontPanelLockDisabledEventId.


(Inherited from UsbSwBase)
Public propertyFrontPanelLockEnabledFeedback Property to indicate that the front panel lock is enabled.

The DMSystemChange event will trigger with FrontPanelLockEnabledEventId.


(Inherited from UsbSwBase)
Public propertyHosts Property to access the usb hosts on this switch.
(Inherited from UsbSwBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyInputs Get Collection of inputs for this switch
(Inherited from Switch)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyModelNameFeedback Property to report the model name of the unit.

The DMSystemChange event will trigger with ModelNameFeedbackEventId.


(Inherited from UsbSwBase)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNetwork Property to return network object.
(Inherited from UsbSwBase)
Public propertyNumberOfInputs Number of Input Channels on this switch
(Inherited from Switch)
Public propertyNumberOfOutputs Number of Output Channels on this switch
(Inherited from Switch)
Public propertyOutputs Get Collection of outputs for this switch
(Inherited from Switch)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySerialNumberFeedback Property to report the serial number of the unit.

The DMSystemChange event will trigger with SerialNumberFeedbackEventId.


(Inherited from UsbSwBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySwitching Property to return switching object.
(Inherited from UsbSwBase)
Public propertySwitchType The type of DM switcher
(Inherited from Switch)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUploadConfigurationFeedback Property to indicate that the uploading of the configuration file is going on from the USB stick if plugged in. This property value remains "true" until upload of the configuration is completed. Check ConfigurationErrorFeedback for any error related to the upload config operation.

The DMSystemChange event will trigger with UploadConfigurationEventId.


(Inherited from UsbSwBase)
Public propertyUSBEnter Enables the "Output#_USBRoutedTo" or "Input#_USBRoutedTo" source selection analogs for as long as the input is 'true'. When the input is 'false', the analogs have no effect. 'true' (level-sensitive) = Enable USB; 'false' = Disable USB This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Public propertyUsbPortDisabledFeedback Property to indicate that the USB port is disabled. true: USB Port is disabled; false: USB Port is enabled.

The DMSystemChange event will trigger with UsbPortDisabledEventId.


(Inherited from UsbSwBase)
Public propertyUsbPortEnabledFeedback Property to indicate that the USB port is enabled. true: USB Port is enabled; false: USB Port is disabled.

The DMSystemChange event will trigger with UsbPortEnabledEventId.


(Inherited from UsbSwBase)
Public propertyUsbs Property to access the usb devices on this switch.
(Inherited from UsbSwBase)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyVideoEnter Enables the "VideoOut#" video source selection analogs for as long as the input is 'true'. When the input is 'false', the analogs have no effect. 'true' (level-sensitive) = Enable video; 'false' = Disable video This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also