Click or drag to resize

Usbc Properties

The Usbc type exposes the following members.

Properties
 NameDescription
Public propertyAudioChannelsFeedback Reports the number of audio channels detected.

The StreamChange event will trigger with AudioChannelsEventId for Input Streams.

The StreamChange event will trigger with AudioChannelsEventId for Output Streams.


(Inherited from Stream)
Public propertyAudioFormatFeedback Reports the detected audio format accompanying the video.

The StreamChange event will trigger with AudioFormatEventId for Input Streams.

The StreamChange event will trigger with AudioFormatEventId for Output Streams.

This property is supported for "DmRmc100Str" device.
(Inherited from Stream)
Public propertyDisabledByHdcpFeedback Indicates that the corresponding output has been disabled as the result of a failure during HDCP authentication. This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant. This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.For more information about keys and KSVs, see HDCP. This is supported for some of the devices only. 'true' = Output disabled by HDCP; 'false' = Output not disabled by HDCP

The StreamChange event will trigger with DisabledByHdcpEventId.

Public propertyEncryptionMode Property to set the encryption mode. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyEncryptionModeFeedback Property to report the encryption mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with EncryptionModeEventId for Output Streams.


(Inherited from Stream)
Public propertyEncryptionStatusAsTextFeedback This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with EncryptionStatusEventId for Input Streams.


(Inherited from Stream)
Public propertyEncryptionStatusFeedback Property to report the encryption status of the stream. This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with EncryptionStatusEventId for Input Streams.


(Inherited from Stream)
Public propertyHdcpSupportOffFeedback Property to determine if HDCP support is turned off. 'true' = HDCP Support off; 'false' = HDCP Support on This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
Public propertyHdcpSupportOnFeedback Property to determine if HDCP support is turned on. 'true' = HDCP Support on; 'false' = HDCP Support off This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
Public propertyMulticastTTL Property to set the time to live for the multicast. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyMulticastTTLFeedback Property to report the time to live for the multicast. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with MulticastTTLEventId for Output Streams.


(Inherited from Stream)
Public propertyOwner This represents the owner of this stream and needs to be cast accordingly.
(Inherited from Stream)
Public propertyRtspFileName Property to set the file name when used in RTSP mode. Default value is = "live.sdp". This property is only valid if the Type is equal to Transmit.
(Inherited from Stream)
Public propertyRtspFileNameFeedback Property to report the file name when used in RTSP mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with RtspFileNameEventId for Output Streams.


(Inherited from Stream)
Public propertyRtspSessionName Property to set the session name when used in RTSP mode. This property is only valid if the Type is equal to Transmit
(Inherited from Stream)
Public propertyRtspSessionNameFeedback Property to report the session name when used in RTSP mode. This property is only valid if the Type is equal to Transmit

The StreamChange event will trigger with RtspSessionNameEventId for Output Streams.


(Inherited from Stream)
Public propertyStreamAuthenticatedFeedback Property to report if the stream is authenticated. This property is only valid if the Type is equal to Receive

The StreamChange event will trigger with StreamAuthenticatedEventId for Input Streams.


(Inherited from Stream)
Public propertySyncDetectedFeedback Indicates that video sync levels are detected at the input. The sig remains true for as long as sync is detected.

The StreamChange event will trigger with SourceSyncEventId for Input Streams.

The StreamChange event will trigger with SyncDetectedEventId for Output Streams.

Public propertyType Property to return the stream type.
(Inherited from Stream)
Public propertyUnsupportedVideoFeedback Property to indicate if the video is supported video or not. true = Unsupported video; false = Supported video

The StreamChange event will trigger with UnsupportedVideoEventId.

The StreamChange event will trigger with UnsupportedVideoEventId.

This property is supported by DM-NVX-D10, DM-NVX-D20, DM-NVX-E10 and DM-NVX-E20 devices only.
Public propertyVideoAttributes Video Attributes for the DM device

This property will trigger AttributeChange event with VideoAttributeEventIds.


(Inherited from Stream)
Top
See Also