Endpoint |
This class will trigger OutputChange event.
public sealed class EndpointScalerOutput
The EndpointScalerOutput type exposes the following members.
| Name | Description | |
|---|---|---|
| BezelCompensation | Obsolete. Not supported. | |
| BezelCompensationFeedback | Obsolete. Not supported. | |
| ColorDepthModeFeedback |
Reports the current color depth mode.
The OutputChange event will trigger with ColorDepthModeFeedbackEventId for this feedback. If this property is not supported by the device and when you try to get the property value Undetermined will be returned. | |
| ColorSpaceMode | Sets the HDMI color space. If this property is not supported by the device the value cannot be set, and when you try to get the value Auto will be returned. | |
| ColorSpaceModeFeedback |
Reports the HDMI color space.
If this property is not supported "eColorSpaceMode.Auto" shall be returned.
The OutputChange event will trigger with ColorSpaceModeFeedbackEventId. | |
| DisplayMode | Specifies the display mode of the image out of the scaler. | |
| DisplayModeFeedback |
Reports the current display mode of the scaler.
The OutputChange event will trigger with DisplayModeFeedbackEventId for this feedback. | |
| Endpoint | Endpoint device this scaler is a part of. | |
| HdrCapabilityMode | Property to enable/disable AutoHDRMode. If this property is not supported value cannot be set and when you try to get the value Disable will be returned. | |
| HdrCapabilityModeFeedback |
Property to report if the AutoHDRMode is enabled/disabled.
If this property is not supported and when you try to get the value Disable will be returned.
The OutputChange event will trigger with HdrCapabilityModeFeedbackEventId. | |
| HorizontalBezelCompensation | Sets horizontal bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel. | |
| HorizontalBezelCompensationFeedback |
Reports the horizontal bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel.
The OutputChange event will trigger with HorizontalBezelCompensationFeedbackEventId for this feedback. | |
| MaximumColorDepth | Property to set the maximum bit depth. If this property is not supported by the device the value cannot be set, and when you try to get the value Undetermined will be returned. | |
| MaximumColorDepthFeedback |
Property to report the maximum bit depth.
If this property is not supported and when you try to get the value Undetermined will be returned.
The OutputChange event will trigger with MaximumColorDepthFeedbackEventId. | |
| Resolution | Specifies the output resolution of the scaler. | |
| ResolutionFeedback |
Reports the current output resolution of the scaler.
The OutputChange event will trigger with ResolutionFeedbackEventId for this feedback. | |
| ScalingMode | Property to specify the Scaling Mode of the scaler. If this property is not supported then Disable is returned. | |
| ScalingModeFeedback |
Property to report the Scaling mode of the scaler.
If this property is not supported then Disable is returned.
The OutputChange event will trigger with ScalingModeFeedbackEventId. | |
| StandbyTimeout | Specifies the standby timeout of the video output. Not applicable for DM-RMC-4K-SCALER-C. | |
| StandbyTimeoutFeedback |
Reports the current standby timeout of the video output. Not applicable for DM-RMC-4K-SCALER-C.
The OutputChange event will trigger with StandbyTimeoutFeedbackEventId for this feedback. | |
| UnderscanMode | Specifies the underscan mode, which reduced the image size by the specified percentage so that the entire video frame is displayed. Not applicable for DM-RMC-4K-SCALER-C. | |
| UnderscanModeFeedback |
Reports the current underscan mode of the scaler. Not applicable for DM-RMC-4K-SCALER-C.
The OutputChange event will trigger with UnderscanModeFeedbackEventId for this feedback. | |
| UserFreezeDisable | Disables the user freeze. true: user freeze disabled; false : user freeze not disabled This property is only only supported by DM-RMC-4KZ-SCALER-C. | |
| UserFreezeDisabledFeedback |
Indicates if the user freeze is disabled.
true: user freeze disabled; false : user freeze not disabled
This property is only only supported by DM-RMC-4KZ-SCALER-C.
The OutputChange event will trigger with UserFreezeDisableFeedbackEventId for this feedback. | |
| UserFreezeEnable | Enables the user freeze. true: user freeze enabled; false : user freeze not enabled This property is only only supported by DM-RMC-4KZ-SCALER-C. | |
| UserFreezeEnabledFeedback |
Indicates if the user freeze is enabled.
true: user freeze enabled; false : user freeze not enabled
This property is only only supported by DM-RMC-4KZ-SCALER-C.
The OutputChange event will trigger with UserFreezeEnableFeedbackEventId for this feedback. | |
| VerticalBezelCompensation | Sets vertical bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel. | |
| VerticalBezelCompensationFeedback |
Reports the vertical bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel.
The OutputChange event will trigger with VerticalBezelCompensationFeedbackEventId for this feedback. | |
| WallMode | Specifies which portion of the wall image to display in wall mode, where each display in a wall of displays shows a portion of the image. Not applicable for DM-RMC-4KZ-SCALER-C. | |
| WallModeFeedback |
Reports the current wall mode of the scaler. Not applicable for DM-RMC-4KZ-SCALER-C.
The OutputChange event will trigger with WallModeFeedbackEventId for this feedback. | |
| WallModeRaw | Property applicable for DM-RMC-4KZ-SCALER-C Property to specifies which portion of the wall image to display in wall mode, where each display in a wall of displays shows a portion of the image. Displays can be laid out in configurations up to 8x8. Each display requires connection to a separate scaler. The wall mode can be specified using the following method: The video portion can be defined using the 4 digit decimal value WHXY where: W is the width of the wall (number of columns that make up the wall) H is the height of the wall (number of rows) X is the horizontal position of that display on the wall Y is the vertical position of that display on the wall For example, for a 2x2 video wall the upper left would be 2211d, the upper right 2221d, the lower left 2212d and the lower right 2222d. 0d disables the wall mode. *Not applicable in TXMode | |
| WallModeRawFeedback |
Property applicable for DM-RMC-4KZ-SCALER-C
Reports the current wall mode position of the scaler. applicable for DM-RMC-4K-SCALER-C.
The video portion can be defined using the 4 digit decimal value WHXY where:
W is the width of the wall (number of columns that make up the wall)
H is the height of the wall (number of rows)
X is the horizontal position of that display on the wall
Y is the vertical position of that display on the wall
For example, for a 2x2 video wall the upper left would be 2211d, the upper right 2221d, the lower left 2212d and the lower right 2222d.
0d disables the wall mode.
The OutputChange event will trigger with WallModeFeedbackEventId for this feedback. |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| OutputChange | Event triggered when a feedback has changed for this EndpointScalerOutput. EventIds for this are located in the ScalerOutputEventIds class. |