Tpmc |
public class Tpmc8BaseAudioReservedSigs : DeviceExtender
The Tpmc8BaseAudioReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| AllAudioBalance |
Sets the speaker balance.
Valid values range from -32768d (full left) to +32767d (full right). | |
| AllAudioBalanceFeedback | Reports the speaker balance. | |
| AllAudioBalanceLeft |
Adjusts the speaker balance to the left by 1 each time the input is true. The input has no effect once the balance reaches -32768d (full left).
If the input remains true for 0.5 seconds, then the balance will continue to adjust every 25ms until the input goes false or until the limit is reached. | |
| AllAudioBalanceRight |
Adjusts the speaker balance to the right by 1 each time the input is true. The input has no effect once the balance reaches +32767d (full right).
If the input remains true for 0.5 seconds, then the balance will continue to adjust every 25ms until the input goes false or until the limit is reached. | |
| AllAudioOffFeedback | Indicates that the speakers are off. The feedback remains true for as long as the speakers are off. | |
| AllAudioOnFeedback | Indicates that the speakers are on. The feedback remains true for as long as the speakers are on. | |
| AllAudioVolume |
Sets the speaker volume level.
Valid values range from 0% (mute all audio) to 100% (maximum volume). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AllAudioVolumeDown |
Lowers the speaker volume by 1% each time the input is true. The input has no effect once the volume reaches 0%.
If the input remains true for 0.5 seconds, then the volume will continue to decrement every 25ms until the input goes false or until the volume reaches 0%. | |
| AllAudioVolumeFeedback | Reports the speaker volume level. | |
| AllAudioVolumeUp |
Raises the speaker volume by 1% each time the input is true. The input has no effect once the volume reaches 100%.
If the input remains true for 0.5 seconds, then the volume will continue to increment every 25ms until the input goes false or until the maximum volume is reached. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| MicBoostOffFeedback | Indicates that the mic boost setting is off. The output remains true for as long as the mic boost is off. | |
| MicBoostOnFeedback | Indicates that the mic boost setting is on. The output remains true for as long as the mic boost is being applied. | |
| MicOffFeedback | Indicates that mic audio is off. The feedback remains true for as long as line audio is off. | |
| MicOnFeedback | Indicates that mic audio is on. The feedback remains true for as long as mic audio is on. | |
| MicVolume |
Sets the mic volume level.
Valid values range from 0% (mute mic input) to 100% (maximum mic volume). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| MicVolumeDown |
Lowers mic audio volume by 1% each time the input is true. The input has no effect once the volume reaches 0%.
If the input remains true for 0.5 seconds, then the volume will continue to decrement every 25ms until the input goes false or until the volume reaches 0%. | |
| MicVolumeFeedback |
Reports the mic volume level.
The reported level is the value that is set via the mic volume analog input, or adjusted via the mic volume up/down digital inputs. | |
| MicVolumeUp |
Raises mic audio volume by 1% each time the input is true. The input has no effect once the volume reaches 100%.
If the input remains true for 0.5 seconds, then the volume will continue to increment every 25ms until the input goes false or until the maximum volume is reached. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) | |
| WAVBalance |
Sets the WAV audio balance.
Valid values range from -32768d (full left) to +32767d (full right). | |
| WAVBalanceFeedback |
Reports the WAV audio balance.
The reported level is the value that is set via the WAV balance analog input, or adjusted via the WAV balance left/right digital inputs. | |
| WAVBalanceLeft |
Adjusts the WAV audio balance to the left by 1 each time the input is true. The input has no effect once the WAVBalanceFeedback reaches +32767d (full right).
If the input remains true for 0.5 seconds, then the balance will continue to adjust every 25ms until the input goes low or until the limit is reached. | |
| WAVBalanceRight |
Adjusts the WAV audio balance to the right by 1 each time the input is true. The input has no effect once the WAVBalanceFeedback reaches +32767d (full right).
If the input remains true for 0.5 seconds, then the balance will continue to adjust every 25ms until the input goes false or until the limit is reached. | |
| WAVOffFeedback | Indicates that WAV audio is off. The feedback remains true for as long as WAV audio is off. | |
| WAVOnFeedback | Indicates that WAV audio is on. The feedback remains true for as long as WAV audio is on. | |
| WAVVolume |
Sets the WAV volume level.
Valid values range from 0% (mute WAV audio) to 100% (maximum WAV volume). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| WAVVolumeDown |
Lowers WAV audio volume by 1% each time the input is true. The input has no effect once the WAVVolumeFeedback reaches 0%.
If the input remains true for 0.5 seconds, then the volume will continue to increment every 25ms until the input goes low or until the volume reaches 0%. | |
| WAVVolumeFeedback | Reports the current WAV volume level. | |
| WAVVolumeUp |
Raises WAV audio volume by 1% each time the input is true. The input has no effect once the WAVVolumeFeedback reaches 100%.
If the input remains true for 0.5 seconds, then the volume will continue to increment every 25ms until the input goes false or until the maximum volume is reached. |
| Name | Description | |
|---|---|---|
| AllAudioOff | Turns off the speakers. | |
| AllAudioOn | Turns on the speakers. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InitializeJoins |
Method to initialize the sigs of the 8Base AUDIO extender
(Overrides DeviceExtenderInitializeJoins) | |
| MapAnalogInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapAnalogOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MicBoostOff | Turns off mic boost. | |
| MicBoostOn | Applies a 20dB boost to the mic signal. | |
| MicOff | Turns off mic audio. | |
| MicOn | Turns on mic audio. | |
| SendCueEventDataForDeviceExtender |
Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) | |
| Use |
Set the extender as usable on the device.
Call this method before registration of the device.
(Inherited from DeviceExtender) | |
| WAVOff | Turns off WAV audio. | |
| WAVOn |
Turns on WAV audio.
WAV audio includes any sound that is generated by the PC, including Windows Media Player audio and Web sounds. |
| Name | Description | |
|---|---|---|
| DeviceExtenderSigChange |
Event to receive sig information intended for a device extender.
When processing this event, it will hold off other sigs from being received from the device.
If one desires to continue processing the data and receive more information, launch a new thread
and allow this event to exit.
(Inherited from DeviceExtender) |
| Name | Description | |
|---|---|---|
| _InUse |
Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender) |