Click or drag to resize

RoomCnxPad Class

The general RoomCnxPad Class.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.AudioDistributionRoomCnxPad

Namespace: Crestron.SimplSharpPro.AudioDistribution
Assembly: Crestron.SimplSharpPro.AudioDistribution (in Crestron.SimplSharpPro.AudioDistribution.dll) Version: 2.21.121
Syntax
C#
public class RoomCnxPad

The RoomCnxPad type exposes the following members.

Properties
 NameDescription
Public propertyAudioSourceForRoom Property to select the audio source to be switched to the corresponding room.
Public propertyBalance Property to set the balance between the left and right speakers in the corresponding room, relative to 50%.

That is, a value of 50% indicates even distribution between the left and right speakers; 0% equals full left, while 100% equals full right.

The input defaults to 0% (full left), and thus should not be left undefined, as this could lead to undesirable results.

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Public propertyBass Property to set bass level in the corresponding room relative to 50%. That is, a value of 50% signifies a flat bass level corresponding to 0dB.

Valid values range from 0% (-12dB) to 100% (+12dB), adjustable in 2.0dB steps (1% = 2.0dB). The bass is applied equally to the left and right channels.

The input defaults to 0%, and thus should not be left undefined, as this could lead to undesirable results.

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Public propertyEnableLoudness Property to activate the loudness function for the corresponding room for as long as the input is high.

Loudness boosts low and high frequency signals at low volume levels.

'true' means Loudness on and 'false' means Loudness off.

Public propertyIsAmplifiedRoomCnxPad IsAmplifiedRoomCnxPad indicates that RoomCnxPad is Amplified or not.
Public propertyMaximumVolume Property that defines the maxmum volume gain as a percentage from 0% to 100%.

The MinimumVolume and MaximumVolume inputs allow endpoints to be set for volume control.

For instance, if MinimumVolume = 30% and MaximumVolume = 80%, the volume signal would then adjust over a range of -50dB to 0dB.

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Public propertyMinimumVolume Property that defines the minimum volume gain as a percentage from 0% to 100%.

The MinimumVolume and MaximumVolume inputs allow endpoints to be set for volume control.

For instance, if MinimumVolume = 30% and MaximumVolume = 80%, the volume signal would then adjust over a range of -50dB to 0dB.

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Public propertyMonoMode Property to change the audio setting in the corresponding room from stereo to mono mode for as long as the input is high.

'true means 'Mono' and 'false' means Stereo.

This property is not supported on "CNX-PAD8".

Public propertyMuteOn Property to mute audio to the corresponding room for as long as the input is high.

When the input goes low, audio resumes.

'true' means Mute audio and 'false' means Resume audio.

Public propertyNumber The RoomCnxPad number associated with this RoomCnxPad Object
Public propertyRoomOn Property to enable audio to the corresponding room for as long as the input is high.

When the input goes low, audio to the room is disabled.

'true' means Enable audio and 'false' means Disable audio.

Public propertyTreble Property to set treble level in the corresponding room relative to 50%. That is, a value of 50% signifies a flat treble level corresponding to 0dB.

Valid values range from 0% (-12dB) to 100% (+12dB), adjustable in 2.0dB steps (1% = 2.0dB). The treble is applied equally to the left and right channels.

The input defaults to 0%, and thus should not be left undefined, as this could lead to undesirable results.

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Public propertyVolume Property to set the volume level of the corresponding room.

Valid values range from 0% (-80dB) to 100% (+20dB).

Use PercentToUshort(Single) to convert the percentage

to a UShort value or UshortToPercent(UInt16) to convert the UShort value to percentage.

Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also