Stream |
This class will trigger StreamChange and AttributeChange events.
public class StreamWithRtspPort : Stream
The StreamWithRtspPort type exposes the following members.
| Name | Description | |
|---|---|---|
| ActiveStreamBitrateFeedback |
Reports the actual stream bitrate in Mbps. Updated every second. Valid values 50 to 1000 Mbps with 1 Mbps resolution.
The StreamChange event will trigger with ActiveStreamBitrateFeedbackEventId for "DmNvx360". | |
| AdaptiveBitrateModeDisabledFeedback |
Property to indicate that the adaptive bit rate mode is disabled.
The StreamChange event will trigger with AdaptiveBitrateModeDisabledEventId for "DmNvx360", "DmNvx360C", "DmNvx363" and "DmNvx363C" devices. | |
| AdaptiveBitrateModeEnabledFeedback |
Property to indicate that the adaptive bit rate mode is enabled.
The StreamChange event will trigger with AdaptiveBitrateModeEnabledEventId for "DmNvx360", "DmNvx360C", "DmNvx363" and "DmNvx363C" devices. | |
| AudioChannelsFeedback |
Reports the number of audio channels detected.
The StreamChange event will trigger with AudioChannelsEventId for Input Streams. The StreamChange event will trigger with AudioChannelsEventId for Output Streams. (Inherited from Stream) | |
| AudioFormatFeedback |
Reports the detected audio format accompanying the video.
The StreamChange event will trigger with AudioFormatEventId for Input Streams. The StreamChange event will trigger with AudioFormatEventId for Output Streams. This property is supported for "DmRmc100Str" device.(Inherited from Stream) | |
| Bass | Property to adjust the bass level. | |
| BassFeedback |
Property to report the current bass level.
The StreamChange event will trigger with BassEventId. | |
| BitrateType | Property to set bitrate type. This property may not be supported on some devices and ConstantBitrate will be returned if not supported. Value passed for Bitrate Type is not defined in the enum eStreamBitrateType. | |
| BitrateTypeFeedback |
Property to report the bitrate type.
This property may not be supported on some devices and ConstantBitrate will be returned if not supported.
The StreamChange event will trigger with BitrateTypeFeedbackEventId. | |
| Delay | Property to set the delay value. Valid values range from 0 (0ms) to 400 (40ms), where 1 = 0.1ms. | |
| DelayFeedback |
Property to report the delay value.
The StreamChange event will trigger with DelayEventId for "DmRmc100Str". | |
| EncryptionMode |
Property to set the encryption mode.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| EncryptionModeFeedback |
Property to report the encryption mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with EncryptionModeEventId for Output Streams. (Inherited from Stream) | |
| EncryptionStatusAsTextFeedback |
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with EncryptionStatusEventId for Input Streams. (Inherited from Stream) | |
| EncryptionStatusFeedback |
Property to report the encryption status of the stream.
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with EncryptionStatusEventId for Input Streams. (Inherited from Stream) | |
| MulticastTTL |
Property to set the time to live for the multicast.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| MulticastTTLFeedback |
Property to report the time to live for the multicast.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with MulticastTTLEventId for Output Streams. (Inherited from Stream) | |
| Owner |
This represents the owner of this stream and needs to be cast accordingly.
(Inherited from Stream) | |
| RtpAudioPort | Property to set the RTP Audio Port. | |
| RtpAudioPortFeedback |
Property to report the current RTP Audio Port.
The StreamChange event will trigger with RtpAudioPortEventId for "DmRmc100Str" and "DmTxRx4k1000Jstr". The StreamChange event will trigger with RtpAudioPortEventId for "DmTxRx4k1000Jstr". | |
| RtpVideoPort | Property to set the RTP Video Port. | |
| RtpVideoPortFeedback |
Property to report the current RTP Video Port.
The StreamChange event will trigger with RtpVideoPortEventId for "DmRmc100Str" and "DmTxRx4k1000Jstr". The StreamChange event will trigger with RtpVideoPortEventId for "DmTxRx4k1000Jstr". | |
| RtspFileName |
Property to set the file name when used in RTSP mode.
Default value is = "live.sdp".
This property is only valid if the Type is equal to Transmit.
(Inherited from Stream) | |
| RtspFileNameFeedback |
Property to report the file name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with RtspFileNameEventId for Output Streams. (Inherited from Stream) | |
| RtspPort | Property to set the RTSP Port. | |
| RtspPortFeedback |
Property to report the current RTSP Port.
The StreamChange event will trigger with RtspPortEventId for "DmRmc100Str" and "DmTxRx4k1000Jstr". The StreamChange event will trigger with RtspPortEventId for "DmTxRx4k1000Jstr". | |
| RtspSessionName |
Property to set the session name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| RtspSessionNameFeedback |
Property to report the session name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with RtspSessionNameEventId for Output Streams. (Inherited from Stream) | |
| ScreenSelection |
Property to select the stream source for the encoder from the display list
Valid values are: 0 - Display00 (Default) 1 - Display01 2 - Display02 3 - Display03 4 - Display04 5 - Display05 6 - Display06 7 - Display07 8 - Display08 9 - Display09 | |
| ScreenSelectionFeedback |
Property to report the selected stream source for the encoder from the display list
The StreamChange event will trigger with ScreenSelectionFeedbackEventId for the "DmNvxSwx310". | |
| StatisticsDisableFeedback |
Property to indicate that the statistics is disabled.
The StreamChange event will trigger with StatisticsDisableEventId if Type is Receive or StatisticsDisableEventId if Type is Transmit. | |
| StatisticsEnableFeedback |
Property to indicate that the statistics is enabled.
The StreamChange event will trigger with StatisticsEnableEventId if Type is Receive or StatisticsEnableEventId if Type is Transmit. | |
| StatisticsNumberOfAudioPacketsDroppedFeedback |
Property to report the number of audio packets dropped. This property is not supported by "DmNvxBaseClass".
The StreamChange event will trigger with StatisticsNumberOfAudioPacketsDroppedEventId for "DmRmc100Str". | |
| StatisticsNumberOfAudioPacketsReceivedFeedback |
Property to report the number of audio packets received. This property is not supported by "DmNvxBaseClass".
The StreamChange event will trigger with StatisticsNumberOfAudioPacketsReceivedEventId for "DmRmc100Str". | |
| StatisticsNumberOfVideoPacketsDroppedFeedback |
Property to report the number of video packets dropped. This property is same as the "NumberOfPacketsDroppedFeedback" in "DmNvxBaseClass".
The StreamChange event will trigger with StatisticsNumberOfVideoPacketsDroppedEventId for "DmRmc100Str". | |
| StatisticsNumberOfVideoPacketsReceivedFeedback |
Property to report the number of video packets received. This property is same as the "NumberOfPacketsReceivedFeedback" in "DmNvxBaseClass".
This property is not supported by "DmNvxBaseClass.SourceTransmit".
The StreamChange event will trigger with StatisticsNumberOfVideoPacketsReceivedEventId for "DmRmc100Str". | |
| StatisticsNumberOfVideoPacketsTransmittedFeedback |
Property to report the number of video packets transmitted when streaming out. This property is same as the "NumberOfPacketsTransmittedFeedback" in "DmNvxBaseClass".
The StreamChange event will trigger with StatisticsNumberOfVideoPacketsTransmittedEventId for "DmNvxBaseClass.SourceTransmit". | |
| StreamAuthenticatedFeedback |
Property to report if the stream is authenticated.
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with StreamAuthenticatedEventId for Input Streams. (Inherited from Stream) | |
| StreamBitrate | Property to set the stream bitrate in Mbps. Updated every second. Valid values 50 to 1000 Mbps with 1 Mbps resolution. This property is not supported by "DmNvxBaseClass.SourceReceive" property. | |
| StreamBitrateFeedback |
Reports the current stream bitrate in Mbps. Updated every second. Valid values 50 to 1000 Mbps with 1 Mbps resolution.
The StreamChange event will trigger with StreamBitrateEventId for "DmRmc100Str", "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C". | |
| StreamProfileFeedback |
Property to report the currently selected profile. This property is not supported by "Dm100xStrBase" device.
The StreamChange event will trigger with StreamProfileEventId for "DmTxRx4k1000Jstr". | |
| StreamType | Property to set stream type. This Property is supported by "DM-NVX-760", "DM-NVX-760C", "DM-NVX-E30", "DM-NVX-E30C" and "DM-NVX-36x" devices. Value passed for Stream Type is not defined in the enum eStreamTransmitType. | |
| StreamTypeFeedback |
Property to report the stream type.
The StreamChange event will trigger with StreamTypeFeedbackEventId. | |
| Treble | Property to adjust the treble level. | |
| TrebleFeedback |
Property to report the current treble level.
The StreamChange event will trigger with TrebleEventId. | |
| TsPort | Property to set the TS Port. Not supported by "DmNvxBaseClass.SourceReceive" property. | |
| TsPortFeedback |
Property to report the current TS Port.
The StreamChange event will trigger with TsPortEventId for "DmRmc100Str", "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C".. The StreamChange event will trigger with TsPortEventId for "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C". | |
| Type |
Property to return the stream type.
(Inherited from Stream) | |
| VideoAttributes |
Video Attributes for the DM device
This property will trigger AttributeChange event with VideoAttributeEventIds. (Inherited from Stream) | |
| Volume | Property to set the source volume. | |
| VolumeFeedback |
Property to report the current source volume.
The StreamChange event will trigger with VolumeEventId. |
| Name | Description | |
|---|---|---|
| DisableStatistics | Method to disable the statistics. | |
| DisbleAdaptiveBitrateMode | Method to enable the adaptive bit rate mode. | |
| EnableAdaptiveBitrateMode | Method to enable the adaptive bit rate mode. | |
| EnableStatistics | Method to enable the statistics. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| ResetStatistics | Method to reset the statistics. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| StreamChange |
Event triggered when the Stream reports information to the Control System.
Valid event IDs are available in DMInputEventIds and DMOutputEventIds. (Inherited from Stream) |