Dvphd |
The DvphdSourceControlReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| BlackBarMode | Property to set the method of black bar removal (after preset selection or auto-calibration). | |
| BlackBarModeFeedback |
Property to report the current black bar removal mode.
The DeviceExtenderSigChange event will trigger with UShortChange and BlackBarModeFeedback. | |
| BlackBarRatio | Property to set the black bar ratio. | |
| BlackBarRatioFeedback |
Property to report the current black bar ratio.
The DeviceExtenderSigChange event will trigger with UShortChange and BlackBarRatioFeedback. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| BrightnessDown | Property to adjust the brightness of the source image down by one step. | |
| BrightnessUp | Property to adjust the brightness of the source image up by one step. | |
| ContrastDown | Property to adjust the contrast of the source image down by one step. | |
| ContrastUp | Property to adjust the contrast of the source image up by one step. | |
| CurrentPresetFeedback |
Property to report the preset number currently being recalled or saved.
The DeviceExtenderSigChange event will trigger with UShortChange and CurrentPresetFeedback. | |
| DetailEnhancement | Property to set the amount of detail enhancement to apply to the video source input image. | |
| DetailEnhancementDown | Property to adjust the amount of detail enhancement to apply to the video source input image down. | |
| DetailEnhancementFeedback |
Property to report the detail enhancement currently being applied to the video source input image.
The DeviceExtenderSigChange event will trigger with UShortChange and DetailEnhancementFeedback. | |
| DetailEnhancementUp | Property to adjust the amount of detail enhancement to apply to the video source input image up. | |
| Freeze | Property to freeze the video source image. | |
| FreezeFeedback |
Property to indicate that the video source image is frozen.
The DeviceExtenderSigChange event will trigger with BoolChange and FreezeFeedback. | |
| GainBlueDown | Property to decrease the gain of the blue chrominance channel by one step. | |
| GainBlueUp | Property to increase the gain of the blue chrominance channel by one step. | |
| GainGreenDown | Property to decrease the gain of the green chrominance channel by one step. | |
| GainGreenUp | Property to increase the gain of the green chrominance channel by one step. | |
| GainRedDown | Property to decrease the gain of the red chrominance channel by one step. | |
| GainRedUp | Property to increase the gain of the red chrominance channel by one step. | |
| HighQualityDeinterlacer | Property to apply high quality deinterlacing to the video source image. This property value is interlocked with the StandardDeinterlacer property value. | |
| HighQualityDeinterlacerFeedback |
Property to indicate that the high quality deinterlacer is ON.
The DeviceExtenderSigChange event will trigger with BoolChange and HighQualityDeinterlacerFeedback. | |
| HueDown | Property to adjust the hue of the video source input image down by one step. | |
| HueUp | Property to adjust the hue of the video source input image up by one step. | |
| InputCalibrationAuto | Property to turn on auto-calibration mode. This property value is interlocked with the InputCalibrationManual property value. | |
| InputCalibrationManual | Property to turn off auto-calibration mode. This property value is interlocked with the InputCalibrationAuto property value. | |
| InputDviFeedback |
Property to indicate the video signal type detected at the video input is DVI.
The DeviceExtenderSigChange event will trigger with BoolChange and InputDviFeedback. | |
| InputRgbFeedback |
Property to indicate the video signal type detected at the video input is RGB.
The DeviceExtenderSigChange event will trigger with BoolChange and InputRgbFeedback. | |
| InputSdiFeedback |
Property to indicate the video signal type detected at the video input is SDI.
The DeviceExtenderSigChange event will trigger with BoolChange and InputSdiFeedback. | |
| InputSVideoFeedback |
Property to indicate the video signal type detected at the video input is S-Video.
The DeviceExtenderSigChange event will trigger with BoolChange and InputSVideoFeedback. | |
| InputVideoFeedback |
Property to indicate the video signal detected at the video input.
The DeviceExtenderSigChange event will trigger with BoolChange and InputVideoFeedback. | |
| InputYPbPrFeedback |
Property to indicate the video signal type detected at the video input is YPbPr.
The DeviceExtenderSigChange event will trigger with BoolChange and InputYPbPrFeedback. | |
| InterlacedFeedback |
Property to indicate that the video is interlaced (each frame is half the picture) when the value equals 1.
The DeviceExtenderSigChange event will trigger with UShortChange and InterlacedFeedback. | |
| MoveDown | Property to move the source image in the down direction by one step. | |
| MoveLeft | Property to move the source image in the left direction by one step. | |
| MoveRight | Property to move the source image in the right direction by one step. | |
| MoveUp | Property to move the source image in the up direction by one step. | |
| NoiseReduction | Property to set the amount of noise reduction to apply to the video source input image. | |
| NoiseReductionDown | Property to adjust the amount of noise reduction to apply to the video source input image down by one step. | |
| NoiseReductionFeedback |
Property to report the noise reduction currently being applied to the video source input image.
The DeviceExtenderSigChange event will trigger with UShortChange and NoiseReductionFeedback. | |
| NoiseReductionUp | Property to adjust the amount of noise reduction to apply to the video source input image up by one step. | |
| NoiseThreshold | Property to set the noise threshold, which is used to discriminate between fine detail in the image and noise that may be present in the source. | |
| NoiseThresholdDown | Property to adjust the noise threshold down by one step. | |
| NoiseThresholdFeedback |
Property to report the noise threshold currently being applied to the video source input image.
The DeviceExtenderSigChange event will trigger with UShortChange and NoiseThresholdFeedback. | |
| NoiseThresholdUp | Property to adjust the noise threshold up by one step. | |
| NoVideoFeedback |
Property to indicate that no source is detected at the video input.
The DeviceExtenderSigChange event will trigger with BoolChange and NoVideoFeedback. | |
| Number | Source Number | |
| PanX | Property to specify the offset to apply from the left margin of the video window. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| PanXFeedback |
Property to report the current pan setting.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and PanXFeedback. | |
| PositionHorizontal | Property to set the horizontal position of the source image. | |
| PositionHorizontalFeedback |
Property to report the horizontal position of the source image.
The DeviceExtenderSigChange event will trigger with UShortChange and PositionHorizontalFeedback. | |
| PositionVertical | Property to set the vertical position of the RGB source image. | |
| PositionVerticalFeedback |
Property to report the vertical position of the RGB source image.
The DeviceExtenderSigChange event will trigger with UShortChange and PositionVerticalFeedback. | |
| PresetActiveFeedback |
Property to indicate that the current settings match the current preset values.
The DeviceExtenderSigChange event will trigger with BoolChange and PresetActiveFeedback. | |
| PresetDown | Property to adjust the color preset number down. | |
| PresetIsLoadedFeedback |
Property to indicate that the current settings match the current preset values when the value equals 1.
The DeviceExtenderSigChange event will trigger with UShortChange and PresetIsLoadedFeedback. | |
| PresetUp | Property to adjust the color preset number up. | |
| RgbSyncOnGreenMode | Property to set how the system detects "RGB sync on green" vs. "YPbPr" on the DVI connectors. | |
| RgbSyncOnGreenModeFeedback |
Property to report the current RGB sync on green mode setting.
The DeviceExtenderSigChange event will trigger with UShortChange and RgbSyncOnGreenModeFeedback. | |
| SafeTvSetupMaximumFeedback |
Property to indicate the current overscan setting is Maximum.
The DeviceExtenderSigChange event will trigger with BoolChange and SafeTvSetupMaximumFeedback. | |
| SafeTvSetupMinimalFeedback |
Property to indicate the current overscan setting is Minimal.
The DeviceExtenderSigChange event will trigger with BoolChange and SafeTvSetupMinimalFeedback. | |
| SafeTvSetupNoneFeedback |
Property to indicate the current overscan setting is Normal.
The DeviceExtenderSigChange event will trigger with BoolChange and SafeTvSetupNoneFeedback. | |
| SaturationDown | Property to adjust the saturation of the video source input image down by one step. | |
| SaturationUp | Property to adjust the saturation of the video source input image up by one step. | |
| SelectedPreset | Property to set the color preset number that will be saved with PresetSave or recalled with PresetLoad. | |
| SelectedPresetFeedback |
Property to indicate the preset number that will be saved with PresetSave or recalled with PresetLoad.
The DeviceExtenderSigChange event will trigger with UShortChange and SelectedPresetFeedback. | |
| ShrinkHorizontal | Property to shrink the source image horizontally by one step. | |
| ShrinkVertical | Property to shrink the source image vertically by one step. | |
| SizeHorizontal | Property to set the horizontal size of the RGB source image. | |
| SizeHorizontalFeedback |
Property to report the horizontal size of the RGB source image.
The DeviceExtenderSigChange event will trigger with UShortChange and SizeHorizontalFeedback. | |
| SizeVertical | Property to set the vertical size of the RGB source image. | |
| SizeVerticalFeedback |
Property to report the vertical size of the RGB source image.
The DeviceExtenderSigChange event will trigger with UShortChange and SizeVerticalFeedback. | |
| SourceTypeFeedback |
Property to indicate both the video source type and video card.
The DeviceExtenderSigChange event will trigger with UShortChange and SourceTypeFeedback. | |
| StandardDeinterlacer | Property to apply standard deinterlacing to the video source image. This property value is interlocked with the HighQualityDeinterlacer property value. | |
| StandardDeinterlacerFeedback |
Property to indicate that the standard deinterlacer is ON.
The DeviceExtenderSigChange event will trigger with BoolChange and StandardDeinterlacerFeedback. | |
| StretchHorizontal | Property to stretch the source image horizontally by one step. | |
| StretchVertical | Property to stretch the source image vertically by one step. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| SyncCoarse | Property to set the coarse sync adjustment of the RGB source image. | |
| SyncCoarseFeedback |
Property to report the coarse sync value of the RGB source image.
The DeviceExtenderSigChange event will trigger with UShortChange and SyncCoarseFeedback. | |
| SyncCoarseLess | Property to decrease the coarse sync adjustment by one step. | |
| SyncCoarseMore | Property to increase the coarse sync adjustment by one step. | |
| SyncFine | Property to set the fine sync adjustment of the RGB source image. | |
| SyncFineFeedback |
Property to report the fine sync value of the RGB source image.
The DeviceExtenderSigChange event will trigger with UShortChange and SyncFineFeedback. | |
| SyncFineLess | Property to decrease the fine sync adjustment by one step. | |
| SyncFineMore | Property to increase the fine sync adjustment by one step. | |
| UnknownResolutionFeedback |
Property to indicate that the output resolution is unknown.
The DeviceExtenderSigChange event will trigger with BoolChange and UnknownResolutionFeedback. | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) | |
| VideoAttributes | Video attributes. | |
| VideoControls | Video controls. | |
| ZoomX | Property to specify the amount of zoom to apply to the video source image. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| ZoomXFeedback |
Property to report the current zoom setting.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and ZoomXFeedback. |