Crestron.SimplSharpPro.Lighting
Classes
| Class | Description | |
|---|---|---|
 | AdvDimmer |
Crestron device that controls Dimmable loads and contains feedbacks and buttons.
|
| AdvSwitch |
Crestron device that controls switched loads and contains feedback
|
| AdvSwitchWithButton |
Crestron device that controls switched loads also contains Button and feedback.
|
| BasicDimmingLoad |
Base class for EX Dimmer Loads.
|
| Clc1dimflv2ex24v |
CLC-1DIMFLV2EX-24V Wireless In-Ceiling 0-10V Dimmer, for 24VDC Applications.
|
| Clc1dimflv2ex24vButtonSettings |
Class to specify the parameters of the button functions when the unit is in remote mode.
|
| Clc1dimflv2ex24vDimLoad |
Load for Clc1dimflv2ex24vDimLoad devices.
|
| Clc1dimflv2ex24vUISettings |
Class to specify the parameters of the user interface for CLC1DimFlv2Ex24v devices.
|
| ClcButtonSettings |
Class to specify the parameters of the button functions when the unit is in remote mode.
|
| ClcDimLoad |
Load for CLC and CLCI devices.
|
| ClcDimUISettings |
Class to specify the parameters of the user interface for CLC dimmer devices.
|
| ClcfDimuexDimLoad |
Load for ClcfDimuExDimLoad devices.
|
| Clci1dimflv2ex |
Wireless 2-channel 0-10 Volt dimmer, 230VAC.
|
| Clci1sw2ex |
CLCI-1SW2EX 2-channel lighting switch that communicates using the infiNET EX wireless protocol
|
| ClciDimuex |
CLCI-DIMUEX Wireless In-Ceiling Dimmer, 230VAC
|
| ClciSwitch |
Base class for CLCI switches.
|
| ClciSwitchedLoad |
Specific load type used on CLCI switch devices.
|
| ClcUISettings |
Class to specify the parameters of the user interface for CLC devices.
|
| ClcwBase |
Base class for CLC or CLW lighting devices.
|
| ClDimmer |
Base class for CLC Dimmer devices.
|
| ClDimuex |
Base class for Cl dimmer devices.
|
| ClfiLDimuex |
CLFI-LDIMUEX plug-in, single-channel lighting dimmer , 230VAC
|
| ClfLdimuex |
CLF-LDIMUEX compact, single-channel lighting dimmer that communicates using the infiNET EX wireless protocol.
|
| ClSwitchedLoad |
Specific load type used on the Clwl Switch devices.
|
| ClwAdvDimLoad |
Specific load type used on the CLW-EX Dimmer device.
|
| ClwBasicDimmingLoad |
EX load type that contains load parameters.
|
| ClwDelvexE |
Cameo Express 120V 230V and 277V ELV dimmers.
|
| ClwDelvexP |
Cameo Professional 120V, 230V and 277V ELV dimmers
|
| ClwDimex |
Base class for the CLW Dimmer devices.
|
| ClwDimExDimmerRemoteButtonSettings |
Class to specify the parameters of the keypad button functions when the unit is in Remote Mode.
|
| ClwDimExDimmerUISettings |
Class to specify the parameters of the user interface of this unit.
|
| ClwDimexE |
Cameo Express 120V and 230V dimmers
|
| ClwDimexP |
Cameo Professional 120V, 230V, and 277V dimmers
|
| ClwDimmingLoad |
Base Load type for the CLW Dimmer devices.
|
| ClwDimswex |
Base class for CLW DimSwitch devices.
|
| ClwDimswexE |
Cameo Professional 1000W dimmer/switch.
|
| ClwDimswexP |
Cameo Express 600W dimmer/switch.
|
| Clwi1sw2ex |
European Cameo CLWI-1SW2EX Wireless Switch
|
| ClwiDimflvex |
Class used for CLWIDimuex dimmers.
|
| ClwiDimmer |
Base class for CLWI dimmer devices.
|
| ClwiDimuex |
Class used for ClwiDimuex dimmers.
|
| ClwiSwex |
European Cameo CLWI-SWEX Wireless Switch
|
| ClwiSwexSwitchLoad |
Specific load type used on the CLWI Switch device.
|
| ClwiSwitch |
Base class for CLWI Switch devices.
|
| ClwLdimex |
Base class for CLW-LDIM devices.
|
| ClwLdimex1 |
Crestron Plug-in lamp dimmers that communicate using infiNET wireless.
|
| ClwLdimex2 |
Crestron Plug-in lamp dimmers that communicate using infiNET wireless.
|
| ClwLDimLoad |
Dimming load for CLW-LDIM devices.
|
| ClwLswex |
Base class for Clwl Switch devices.
|
| ClwLswex1 |
Cameo CLW-LSWEX-1 Wireless Lamp Switch
|
| ClwLswex2 |
Cameo CLW-LSWEX-2 Wireless Lamp Switch
|
| ClwSwex |
Base class for CLW Switch devices.
|
| ClwSwexE |
Cameo CLW-SWEX-E Wireless In-Wall Switch
|
| ClwSwexP |
Cameo CLW-SWEX-P Wireless In-Wall Switch
|
| ClwSwExSwitchRemoteButtonSettings |
Class to specify the parameters of the keypad button functions when the unit is in Remote Mode.
|
| ClwSwExSwitchUISettings |
Class to specify the parameters of the user interface of this unit.
|
| ClwSwitchLoad |
Specific load type used on the CLW-EX Switch device.
|
| Clx1Delv4 |
CLX-1DELV4 Cresnet 4 Channel Electronic Low-Voltage Dimmer Module with Single Feed.
|
| Clx1Dim4 |
CLX-1DIM4 Cresnet 4 Channel Dimmer Module with Single Feed.
|
| Clx1Dim8 |
CLX-1DIM8 Cresnet 8 Channel Dimmer Module with Single Feed.
|
| Clx1DimU4 |
4 channel cresnet constant power universal dimmer
CLX-1DIMU4 lighting control module that provides up to 4-channels of dimming Incandescent, Tungsten-Halogen,
Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, and Phase Control Dimmable LED type lighting loads
|
| Clx1Fan4 |
CLX-1FAN4 Cresnet 4 Channel Fan Speed Control Module with 1 Feed. Controls up to four ceiling fans.
|
| Clx1Mc4 |
CLX-1MC4 Cresnet 4 Channel Motor Control Module with 1 Feed. Controls up to four (4) bi-directional motors, such as motors that control shades or screens.
|
| Clx2Dim2 |
CLX-2DIM2 Cresnet 2 Channel Dimmer Module with 2 Feeds.
|
| Clx2Dim8 |
CLX-2DIM8 Cresnet 8 Channel Dimmer Module with 2 Feeds.
|
| Clx2DimU8 |
8 channel cresnet constant power universal dimmer
CLX-2DIMU8 lighting control module that provides up to 8-channels of dimming Incandescent, Tungsten-Halogen,
Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, and Phase Control Dimmable LED type lighting loads
|
| Clx4Hsw4 |
CLX-4HSW4 Cresnet 4 Channel High-Inrush Current Switch Module with 4 Feeds.
|
| ClxBase |
Base class for the CLX device
|
| ClxDimmerBase |
CLX Dimmer Devices: Base class for CLX Dimming Devices. Please note that “OnLoadStateChange” is not fired for
the CLX type devices.
|
| ClxEventIds |
Class to define the CLX device Event IDs.
|
| ClxFanLoad |
Fan Load Class for CLX Fan Speed Control Devices.
|
| ClxHswLoad |
Switched Load class for CLX High-Inrush Current Switches.
|
| ClxLightingLoad |
Lighting Load Base Class for CLX Dimmer Devices.
|
| ClxMotor |
Motor Class for CLX Motor Control Modules.
|
| ClxXDelvYBase |
CLX XDelvY Dimmers: Base class for CLX-XDelvY Dimmer Modules.
|
| ClxXDelvYLightingLoad |
Lighting Load Class for CLX-XDelvY Dimmer Devices.
|
| ClxXDimYBase |
CLX XDimY Dimmers: Base class for CLX-XDimY Dimmer Modules.
|
| ClxXDimYLightingLoad |
Lighting Load Class for CLX-XDimY Dimmer Devices.
|
| DaliBallast |
DALI Ballast Class for DIN-DALI-2 Device.
|
| DaliGroup |
DALI Group Class for DIN-DALI-2 Device.
|
| DaliLoop |
DALI Loop Class for DIN-DALI-2 Device.
|
| Dimmer |
Crestron device that controls Dimmable loads.
|
| Din8Sw8 |
DIN-8SW8 device provides 8 high-voltage relays for controlling switched loads such as non-dimmed lighting modules and exhaust fans.
|
| Din8Sw8Base |
Base class for the DIN-8SW8 based devices
|
| Din8Sw8i |
DIN-8SW8I device provides 8 high-voltage relays for controlling switched loads such as non-dimmed lighting modules and exhaust fans.
Also supports 8 digital inputs
|
| DinDali2 |
Ethernet based Digital Addressable Lighting Interface (DALI) with 2 DALI outputs, allowing control
of up to 128 individual DALI ballasts (two 64-ballast networks).
|
| DinDali2Cresnet |
Cresnet based Digital Addressable Lighting Interface (DALI) with 2 DALI outputs, allowing control
of up to 128 individual DALI ballasts (two 64-ballast networks).
|
| DinDali2EventArgs |
Event arguments used from the generic base event.
|
| Glpp1DimFlv2CnPm |
Crestron Green Light Power Pack, 2-Channel 0-10V Dimmer w/Cresnet and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| Glpp1DimFlv2ExPm |
Crestron Green Light Power Pack, 2-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| Glpp1DimFlv3CnPm |
Crestron Green Light Power Pack, 3-Channel 0-10V Dimmer w/Cresnet and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| Glpp1DimFlv3ExPm |
Crestron Green Light Power Pack, 3-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| Glpp1Sw2Cn |
Crestron Green Light Power Pack, 2-Channel Switch w/Cresnet.
|
| Glpp1Sw2Ex |
Crestron Green Light Power Pack, 2-Channel Switch w/infiNET EX Wireless.
|
| Glpp1Sw3Cn |
Crestron Green Light Power Pack, 3-Channel Switch w/Cresnet.
|
| Glpp1Sw3Ex |
Crestron Green Light Power Pack, 3-Channel Switch w/infiNET EX Wireless.
|
| GlppBase |
GLPP Devices: Base class for GLPP Series Devices.
|
| GlppDimFlvCnPm |
Crestron Green Light Power Pack, 1-Channel 0-10V Dimmer with Cresnet and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| GlppDimFlvExPm |
Crestron Green Light Power Pack, 1-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring.
PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads.
|
| GlppDimmerBase |
GLPP Dimmers: Base class for GLPP Dimmers.
|
| GlppEventIds |
Event Ids that are valid for a GLPP Series devices Sig objects.
|
| GlppLDimmerBase |
GLPP Dimmers with LDimming Load: Base class for GLPP Dimmers with LDimming Load.
|
| GlppLightingPresetEventArgs |
Event arguments used to determine what lighting preset information has been received from the GLPP device.
|
| GlppLightingPresetObject |
Lighting Preset Class to define the common preset sigs for GLPP Series devices.
|
| GlppOccupancySensorIrChangeEventArgs |
Arguments to describe the GLPP Occupancy Sensor and IR Settings Sig change.
|
| GlppPhotocellChangeEventArgs |
Arguments to describe the GLPP Photocell Settings Sig change.
|
| GlppPhotocellLoad |
GLPP Lighting Load Specific Photocell Information Class
|
| GlppSwCn |
Crestron Green Light Power Pack, 1-Channel Switch w/Cresnet.
|
| GlppSwEx |
Crestron Green Light Power Pack, 1-Channel Switch w/infiNET EX Wireless.
|
| GlppSwitchBase |
GLPP Switches: Base class for GLPP Switches.
|
| LDimmingLoad |
Base class for LDimming Loads
|
| Switch |
Crestron Device that controls switched loads.
|
Delegates
| Delegate | Description | |
|---|---|---|
 | DinDali2EventHandler |
Delegate to define the event handler information for the DIN-DALI-2 Device sig changes.
|
| GlppLightingPresetEventHandler |
Delegate to define the event handler information for the GLPP Device Lighting Preset LastRecallFeedback sig changes.
|
| GlppOccupancySensorIrChangeEventHandler |
Delegate definition for the GLPP Occupancy Sensor and IR Settings Sig change event.
|
| GlppPhotocellChangeEventHandler |
Delegate definition for the GLPP Photocell Settings Sig change event.
|
Enumerations
| Enumeration | Description | |
|---|---|---|
 | ClwDimExDimmerRemoteButtonSettings..::..eBargraphBehavior |
Enumeration that defines the valid values for the BargraphBehavior Parameter.
|
| DaliBallast..::..eBallastStatus |
Enum to define DALI Ballast Status bits masks to check the status reported by the 8-bit value.
|
| DaliLoop..::..eCommonControlCommandCodes |
Enum to define DALI 3-byte Common Control Command Codes.
|
| DaliLoop..::..eDaliDeviceTypes |
Enum to define addresses for different DALI device types (for Controller Type Addressing).
|
| DaliLoop..::..eTwoByteCommandCodes |
Enum to define DALI 2-byte Command codes. Based on the address provided for the command the command will be sent to Ballast/Group/All Ballasts.
For Direct Arc Power Control command the arc power level shall be provided in place of the command code.
Refer the DALI specification "IEC 62386-102 Digital addressable Lighting Interface_General Requirements-Control Gear.pdf" for more details on the following commands.
|
| eCLDeviceStatus |
Enumeration to define the various error states from a CL type dimmer
|
| eCLPhaseControl |
Enumeration that describes phase control.
|
| eCLWButtonLayout |
Enumeration to describe the different valid button layout possible for this device.
|
| eCLWIButtonLayout |
Enumeration to describe the different valid button layout possible for CLWI devices.
|
| eClxFanSpeeds |
Enum to define different Fan Speeds for CLX Fan Loads.
|
| eClxMotorState |
Enum to define the CLX Motor States.
|
| eDimmable |
Enumeration to define if the dimmer is dimmable.
|
| eOccupancyActions |
Enum to define the actions to be taken when room goes from unoccupied to occupied state.
|
| eRelayOperation |
Specifies the operating mode of the 24VDC relay terminal.
|
| eVacatingActions |
Enum to define the actions to be taken when room goes from occupied to unoccupied state.
|
| eXDelvYCurveTypes |
Enumeration that defines the CLX-XDelvY device dimmable curve types.
|
| eXDimYCurveTypes |
Enumeration that defines the CLX-XDimY device dimmable curve types.
|
