Hardwired Inputs and Output Types

DMS DM Out Advanced output for the 6x1

DM HDMI OUTPUT for the DM-MD6x1

DM HDMI OUTPUT

Card based Switcher Input Cards

The card Based Switcher Outputs

DPMS3-300 Auto Echo Cancellation Output.

DMPS3 Aux1 Output

DMPS3 Aux2 Output

Abstract base class representing the DMPS3 Aux Output. The other Aux outputs are derived from this.

DMPS3 Codec output. This device has no functions, but exists solely so an input can be routed to it (Audio only)

DPMS3-4K-150-C DM/HDMI/Audio output.

Audio Output stream for Analog Outputs on DMPS3 Systems.

DM/HDMI Output stream settings for both the DM and HDMI Outputs of a DMPS3 System.

DMPS3 DM Input.

Class representing the DMPS3 DM Output.

DMPS3 HDMI Input.

Dmps3 HDMI Input that contains no corresponding Analog Input

Class representing the DMPS3 HDMI Output.

DMPS3 HDMI/VGA/BNC Input.

DMPS3 HDMI/VGA Input.

Base class for the DMPS3 output cards with common functions.

Class representing the DMPS3 Program Output.

DMPS3 SIP Input.

DMPS3 VGA Input.

DMS DNC Analog SPDIF Advanced

The Module includes one IPID for direct connection with a DM transmitter Video and audio status reporting.

DMS CATO HD Output

DMS DM Out Advanced

DMS-HDMI-In-Advanced Video and audio status reporting.

DMS-HDMI-IN-UHP-Advanced Video and audio status reporting.

DMS HDMI Rx Advanced

DMS VGA AnalogAdvanced

HDMI-RX-ADVANCED Hardwired card used by the HD-MD8x1 and HD-MD8x2

DMS-CATO-HD Output Hardwired card used by HD-MD8x1

Base class of DM cards.

The DMCI-DMC-C provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.

The DMCI-DMC-C-DSP provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.

The DMC-4K-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4K-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kCoA and DM OUT 2 is Dmc4kCoB.

The DMC-4K-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4K-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kCoA and DM OUT 2 is Dmc4kCoB.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-4K-CO-HD single output card module takes up a single slot on a switcher.

The DMC-4k-HD provides 1 HDMI input labeled HDMI IN. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4k-HD also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-4k-HD-DSP provides 1 HDMI input labeled HDMI IN. The DMC-4k-HD-DSP provides all of the features of the DMC-HD with the addition of internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4k-HD-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMCI-DMC-C provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.

The DMC-CAT provides (1) set of (2) RJ45 Digital Media inputs, labeled "D" and "M". The "D" input receives video and audio from the "D" output of a DM transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" output of the DM transmitter or output card. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-CAT also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-CAT-DSP provides (1) set of (2) RJ45 Digital Media inputs, labeled "D" and "M". The "D" input receives video and audio from the "D" output of a DM transmitter or output card.The "M" input receives HDCP, EDID, and USB data from the "M" output of the DM transmitter or output card. The DMC-CAT-DSP provides an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-CAT-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-CATO-HD provides two RJ45 Digital Media (DM) outputs, labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver. The DMC-CATO-HD also provides one local HDMI output, configured in parallel with DM Output #1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a remote display device.

The DMC-CATO-HD provides two RJ45 Digital Media (DM) outputs, labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver. The DMC-CATO-HD also provides one local HDMI output, configured in parallel with DM Output #1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a remote display device.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-CATO-HD single output card module takes up a single slot on a switcher.

The DMCI-DMC-C-DSP provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.

The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmCoHdA and DM OUT 2 is DmCoHdB.

The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmCoHdA and DM OUT 2 is DmCoHdB.

The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmCoHdA and DM OUT 2 is DmCoHdB.

The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmCoHdA and DM OUT 2 is DmCoHdB.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-CO-HD single output card module takes up a single slot on a switcher.

The DMC-DVI is a DVI/RGB video card. The DMC-DVI provides one DVI digital video input or analog RGB/YPbPr input (labeled DVI-I) and a balanced/unbalanced audio input (labeled AUDIO IN) that accepts stereo line-level audio. The USB HID port is a Type B port for connection to a USB host. The DMC-DVI also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-F is a video card compatible with the input card slots of a DigitalMedia switcher. The DMC-F provides one DigitalMedia fiber input labeled FIBER IN. The "D" input receives video and audio from the "D" output of a DM fiber transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" input of the DM fiber transmitter or output card. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.The DMC-F also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-F-DSP is a video card compatible with the input card slots of a DigitalMedia switcher. The DMC-F-DSP provides one DigitalMedia fiber input labeled FIBER IN. The "D" input receives video and audio from the "D" output of a DM fiber transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" input of the DM fiber transmitter or output card. The DMC-F-DSP provides an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.The DMC-F-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-FO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-FO provides two fiber optic Digital Media (DM) outputs, each labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver such as the DM-RMC-100-F. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-FO single output card module takes up a single slot on a switcher.

The DMC-HD is an HDMI video card compatible with the input card slots of the DigitalMedia switcher. The DMC-HD provides 1 HDMI input labeled HDMI IN. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-HD also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-HD-DSP provides 1 HDMI input labeled HDMI IN. The DMC-HD-DSP provides all of the features of the DMC-HD with the addition of internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-HD-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-HDO provides an HDMI output.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-HDO single output card module takes up a single slot on a switcher.

Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-10

Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-11

Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-22

The DMC-HDO provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

Provides Two DMC-HDO output cards. Each card provides two stereo audio outputs, break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S.

The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) and two HDMI outputs. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-44

The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) and two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

provides two DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. Also provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

The DMC-CO-HD provides four DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-63

DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (4) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC. Two are SO type and two are S2O type. (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S and two DigitalMedia (DM) output connectors. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment.

The DMCO-73 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DMC-HDO output card. The card provides two stereo audio outputs, break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

The DMCO-74 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also provides a DigitalMedia 8G™ Fiber output connector labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S.

The DMCO-75 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DM output, transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

The DMCO-76 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

The DMCO-77 has two streaming output cards with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment.

The DMCO-80 is an output card compatible with the output card slots of a DMCO enclosure. It contains a DMC-4K-CO. This card is the upgrade for the DMCO-50. The DMC-4K-CO provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

The DMCO-83 is an output card compatible with the output card slots of a DMCO enclosure. This card is the upgrade for the DMCO-85. It represents one DMC-4K-CO and one DMC-HDO card. The DMC-4K-CO provides 2 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1, 2, 3, and 4. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. Each DMC-4K-CO also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. Each DMC-4K-CO also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. The DMC-HDO provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

The DMCO-88 is an output card compatible with the output card slots of a DMCO enclosure. This card is the upgrade for the DMCO-55. It represents two DMC-4K-CO cards. It provides 4 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1, 2, 3, and 4. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. Each DMC-4K-CO also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. Each DMC-4K-CO also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

Base class to the DMC single output card modules.

The DMC-S is a DigitalMedia 8G™ multimode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia SC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length of 1000 feet. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device.

The DMC-S2 is a DigitalMedia 8G™ single mode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia LC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length over 10 miles. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device.

The DMC-F is a video card compatible with the input card slots of a DigitalMedia switcher. The DMC-F provides one DigitalMedia fiber input labeled FIBER IN. The "D" input receives video and audio from the "D" output of a DM fiber transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" input of the DM fiber transmitter or output card. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.The DMC-F also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-S2O-HD single output card module takes up a single slot on a switcher.

base class for the DmcS cards

The DMC-SDI is an SDI video card. The card supports SD-SDI, HD-SDI and 3G-SDI formats, handling high-definition video signals up to 1080p60, and up to 8 channels of 24-bit digital audio. The DMC-SDI provides (1) SDI input labeled SDI IN. An SDI loop-through output (labeled SDI OUT) is included for connection to a local monitor or other SDI device. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the SDI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides (1) HDMI local output port labeled HDMI OUT for feedthrough to a local display device.

The DMC-S-DSP is a DigitalMedia 8G™ multimode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia SC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length of 1000 feet. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device. The DSP model includes an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio.

The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The card also provides one local HDMI output, configured in parallel with the DM port. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-SO-HD single output card module takes up a single slot on a switcher.

DMC-STR Streaming Input Card

Class to define the Common Control Sigs of DMC-STRO and DMC-STR Streaming cards.

DMCI-DMC-STR Streaming Input Card Class for interfacing through Cresnet.

Class to define the Control Sigs for DMC-STR Streaming Input Card.

The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-STRO single output card module takes up a single slot on a switcher.

The DMC-VGA is a VGA video card that is compatible with the input card slots of a DigitalMedia switcher. The DMC-VGA features an analog device receiver and VGA connector.

The DMC-VID4 is a security camera card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID4 provides 4 RCA composite video inputs labeled COMPOSITE IN 1 through COMPOSITE IN 4. Up to four security cameras can be viewed simultaneously in four video windows, each with dynamic colored text overlay. The DMC-VID4 also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

base class for the DmcDiv cards

The DMC-VID-BNC is a BNC video input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-BNC provides (1) set of (3) BNC video inputs that accept composite video, S-Video and component HDTV signals, and a balanced/unbalanced audio input (labeled AUDIO IN) that accepts stereo line-level audio. The DMC-VID-BNC also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-VID-RCA-D is an input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-RCA-D provides one analog video input and one S/PDIF coaxial digital audio input. The DMC-VID-RCA-D accepts composite video, S-Video and component HDTV signals. The S/PDIF input supports 2-channel stereo and 5.1 surround-encoded digital audio sources. The DMC-VID-RCA-D also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

The DMC-VID-RCA-D is an input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-RCA-D provides one analog video input and one S/PDIF coaxial digital audio input. The DMC-VID-RCA-D accepts composite video, S-Video and component HDTV signals. The S/PDIF input supports 2-channel stereo and 5.1 surround-encoded digital audio sources. The DMC-VID-RCA-D also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.

Base class for DM output modules.

Enum to define OSD Location values for DMC-STR Device.

Enum to define the valid Screen Resolutions.

Enum to define the Timeset Methods for DMC-STR.

Session initiation status

Video stream profile

Enum to define Streaming Transport Modes.

The format (resolution) of the video stream

the video input to display.

List of supported Cards

Enums for Hdmi Hdcp State