Crestron.SimplSharpPro.AudioDistribution
Classes
| Class | Description | |
|---|---|---|
 | AmplifiedExpander |
Amplified Expander that contains the Amplified Zones
|
| AmplifiedZone |
A Stereo, Amplified Sonnex Zone.
|
| C2nAmp |
A general C2NAMP class. This would base class for C2N Amplifier devices.
|
| C2nAmp4X100 |
The C2nAmp4X100 is a Cresnet 6-input, 4-output stereo audio switcher and amplifier.The unit supports bridging outputs 1+2 and 3+4
to feed higher power speakers.
|
| C2nAmp6X100 |
The C2NAMP6x100 is a Ethernet supported 6 stereo room power amplifier with 12 stereo lines designed for residential
applications.The unit supports bridging 1+2, 3+4 and 5+6 to feed higher power speakers.Additionally, the C2N-AMP-6X100
also includes two fully-independent auxiliary which enable support for 2 additional rooms.
|
| C2nAmp6x100Cresnet |
The C2NAMP6x100Cresnet is a Cresnet supported 6 stereo room power amplifier with 12 stereo lines designed for residential
applications.The unit supports bridging 1+2, 3+4 and 5+6 to feed higher power speakers.Additionally, the C2N-AMP-6X100
also includes two fully-independent auxiliary which enable support for 2 additional rooms.
|
| DeviceReadyReservedCues |
Class that provides the Device Ready Pulse from the SWAMP.
|
| Expander |
Base Expander class used for the Unamplified and Amplified Expanders
|
| Room |
The general room Class.
|
| RoomEventArgs |
Event arguments to detail what changed on a Room when state information is received.
|
| Source |
Class that represents a SWAMP source.
|
| SourceEventArgs |
Event arguments to detail what changed on a Source when state information is received.
|
| SourceEventIds |
Event Ids valid for audio distribution sources.
|
| SourceWithNameFeedback |
Generic sourceWithNameFeedback class
|
| Spdif |
Class that holds SPDIF properties of this Swamp object.
|
| Swamp |
Base Swamp class containing all the functionality of the Switcher Amplifier Processor
|
| Swamp24x8 |
The SWAMP-24x8 is a 24-input, 8-output Sonnex Multiroom Audio System that provides full-matrix switching, HD audio processing, and high-powered amplification.
|
| Swamp24x8Cresnet |
The SWAMP-24x8 is a 24-input, 8-output Sonnex Multiroom Audio System that provides full-matrix switching, HD audio processing, and high-powered amplification.
|
| SwampE4 |
The SwampE8 is an Amplified, 4-zone expander for the Sonnex Multiroom Audio System.
|
| SwampE8 |
The SwampE8 is an Amplified, 8-zone expander for the Sonnex Multiroom Audio System.
|
| Swe8 |
The SWE-8 (Sonnex 8) is an non-amplified, 8-zone expander for the Sonnex Multiroom Audio System.
|
| UnamplifiedExpander |
Unamplified Expander that contains the Unamplified Zones
|
| UnamplifiedZone |
A Stereo, non-amplified Sonnex Zone.
|
| Zone |
The general Sonnex Zone class.
|
| ZoneEventArgs |
Event arguments to detail what changed on a Zone when state information is received.
|
| ZoneEventIds |
Event Ids valid for audio distribution zones.
|
Delegates
| Delegate | Description | |
|---|---|---|
 | RoomEventHandler |
Delegate definition for the Room event handler.
|
| SourceEventHandler |
Delegate definition for the Source event handler.
|
| ZoneEventHandler |
Delegate definition for the Zone event handler.
|
Enumerations
| Enumeration | Description | |
|---|---|---|
 | eEQSelection |
EQ Selection Enum used to set the tone profile, which sets the bass and treble to pre-defined levels.
|
| eExpanderType |
Expander type enums which can be plugged into the Swamp device
|
| eSource |
Enum containing each Source Number along with its type
|
